Metra 99-7015CHG ISO DIN radioprovision withpocket Installation Guide
- June 7, 2024
- Metra
Table of Contents
99-7015CHG
INSTALLATION INSTRUCTIONS
Mitsubishi Outlander 2014-2019
Mitsubishi Outlander (ES Trim) 2020-2021
Visit MetraOnline.com for more detailed information about the product and up- to-date vehicle-specific applications.
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-7005
Antenna Adapter: Not required
Visit MetraOnline.com for audio/video and steering
wheel control interface options.
TOOLS REQUIRED
- Panel removal tool
- Phillips screwdriver
Attention: With the key out of the ignition, disconnect the negative battery terminal before installing this product. Ensure that all installation connections are secure before cycling the ignition to test this product.
KIT FEATURES
- ISO DIN radio provision with pocket
- Painted Charcoal high gloss
KIT COMPONENTS
- A) Radio housing trim panel
- B) Brackets
- C) Pocket
- D) (8) #8 x 3/8″ truss head Phillips screws
DASH DISASSEMBLY
- Unsnap and remove dash panel. (Figure A)
- Unscrew (4) Phillips screws and remove the factory radio. (Figure B)
Continue to Kit Assembly
KIT ASSEMBLY
ISO DIN radio provision with pocket
- Attach the pocket to the radio brackets with the (4) #8 x 3/8″ truss head Phillips screws provided. (Figure A)
- Mount the bracket/pocket assembly to the housing trim panel with the remaining (4) #8 x 3/8″ truss head Phillips screws provided.. (Figure B)
- Slide the radio into radio brackets and secure it with screws supplied with the radio. (Figure C)
- Locate the factory wiring harness and antenna, plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS.
- Place the new radio assembly into the dash. Reconnect the negative battery terminal and test the radio for proper operation.
- Reassemble the dash in reverse order of disassembly.
\
Having difficulties? We’re here to help.
Contact our Tech Support line at:
386-257-1187
Or via email at:
[email protected]
Tech Support Hours (Eastern Standard Time)
Monday – Friday: 9:00 AM – 7:00 PM
Saturday: 10:00 AM – 7:00 PM
Sunday: 10:00 AM – 4:00 PM
KNOWLEDGE IS POWER ®
Enhance your installation and fabrication skills by enrolling in the most
recognized and respected mobile electronics school in our industry.
Log onto www.installerinstitute.edu or
call 386-672-5771 for more information
and take steps toward a better tomorrow.
Metra recommends MECP certified technicians
Metra ®. The World’s Best Kits.
MetraOnline.com
© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION
REV. 7/15/21 INST99-7015CHG