AICOK AMR521 Slow Masticating Juicer User Manual
- June 7, 2024
- AICOK
Table of Contents
AICOK AMR521 Slow Masticating Juicer User Manual
Product Overview
SAFETY CONDITIONS
IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial purpose
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
- The applicable voltage is 220-240W 50Hz . For safety reasons it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
- After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Never put the product on or dose to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
- Never use the product dose to combustibles.
- Do not let cord hang over edge of counter or touch hot surfaces.
- Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
- In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
- Before you turn on the appliance, make sure that all parts have been installed properly.
- Use only the accessories provided by the manufacturer.
- Do not put your hands or any objects into the feed hole when the appliance is in operation. For this purpose, use only the pusher.
- Put fruit into the feed hole when the appliance is in operation. The feed hole must not be filled with fruit or vegetables during a standstill.
- Be careful not to overload the juice extractor. Do not use too much force when pushing the products through the feed.
- If the appliance is not used or you want to clean it, always disconnect it from the mains and disconnect the feeder cable from the juice extractor.
- Do not dismantle the appliance if it is connected to a power socket
- Do not use abrasive cleaning sponges or caustic cleaning agents for cleaning the appliance.
- The appliance may not be operated for more than 20 minutes without a break.
- Do not put any hard material, large seeds, ice or frozen products into the feed hole of the juice extractor.
- It is recommended to dismantle the juice extractor and thoroughly wash parts immediately after use.
DEVICE DESCRIPTION
- body
- Turning on switch (oN)/ revers switch
- squeezing chamber
- 4, tray
- pusher
- Locking switch
- motors base
- worm
- filter
- nut
- juice
- Pulp container container
- Cleaning brush
PREPARING THE DEVICE TO WORK
To assemble the squeezing chamber (3), put it on the head of the motors base (7) paying attention to the incision. Turn it to the left until it clicks. Audible click indicates lock properly secured. Then insert in it:
- worn (8), whose tip has to be inserted into the hole of base (7)
- place fitter (9) on the head of worn
- place the nut (10) and turn left.
PREPARATION
- Place the body on a flat, hard surface so as not to block the air vents.
- Before use, wash the squeezing chamber, with all its elements, the tray (4) and the pusher.
- Put containers for pulp and juice under the holes
- Verify that the squeezing chamber is complete. it not, connect all of its elements by Figure 3.
- Place the tray (4) on top of the squeezing chanter.
OPERATION
- Place the juice extractor on a smooth, flat and stable surface. Make sure that the appliance is turned oft (the “0” position) before inserting the plug into the socket,
- Wash the hit or vegetables that you want to use. If they do not fit into the feed, cut them into smaller pieces.
- Starl the juice extractor by setting the switch on the cover to ‘ON% The juice extractor should not be operated without any products in the feed longer than for 30 seconds. By pressing lower part of the switch you can change it to reverse mode.
- If the juice extractor gets blocked during operation as a result of too much product between the worm and the mesh filter, turn off the appliance by setting the switch to ‘13% Then, set the switch to the ‘R” position to start reverse rotation. If this does net help to unblock the juice extractor, unplug the device from the power supply, remove parts and clean them manually.
- When you have finished extracting the juice, turn off the appliance by setting the switch to the ‘0’ position and unplug it from the socket.
CLEANING AND MAINTENANCE
- For easier cleaning, rinse removable parts under running water immediately after every washing. After rinsing, leave the parts to dry.
- After dismantling, all removable parts can be cleaned in warm water with dishwashing liquid.
- The stainless steel mesh filter must be rinsed in warm water with a little dishwashing liquid not later than 10 minutes after the end of operation. 4.Do not immerse the mesh filter in bleaching preparations.
- The mesh filter is a part that can be easily damaged. Always handle it carefully.
- Use the included cleaning brush to thoroughly clean the mesh filter.
- Wipe the body , which contains the juice extractor motor, with a soft cloth.
- Juice may cause discolouration of plastic parts. Wash plastic parts immediately after you have used the juice extractor.
- All metal parts should be thoroughly washed and dried.
NOTE: Never immerse the motor unit in water, nor rinse under the tap.
TECHNICAL DATA
- Permitted continuous operation time: 10 minutes
- Break time before another use: 10 minutes
- Device noise level Lwa: 60 dB
- Supply voltage: 220-240V- 50Hz
- Power: 150W
Device is made in class II of insulation. Device is compliant with EU directives:
- Low voltage directive (LVD)
- Electromagnetic compatibility (EMC)
Device marked CE mark on rating label
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Electrical appliance must be returned in order to reduce its reuse and utilization. If the device contains batteries they should be delivered to dedicated points separatelly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>