AICOK KE5502 Stainless Steel Kettle Instruction Manual

AICOK KE5502 Stainless Steel Kettle

Specifications

• Model: KE5502
• Capacity: 1.7L

Product Usage Instructions

Before Using Your Kettle
If you are using the kettle for the first time, it is recommended that you should clean your kettle before use by following these steps:

1. Fill the kettle with the maximum capacity of water (1.7L) and boil it once.
2. Discard the water and repeat step 1.
3. Wipe the surface of the kettle with a damp cloth.

Using Your Electric Kettle
To use your electric kettle:

1. Connect the kettle to the power supply.
2. Add water to the desired level (do not exceed the maximum capacity of 1.7L).
3. Press the power switch to start boiling.
4. The kettle will automatically switch off once the water has boiled.

Boil-Dry Protection
The kettle is equipped with a boil-dry protection function. If you accidentally operate the kettle without water, the power will automatically switch off. If this occurs, follow these steps:

1. Allow the kettle to cool down.
2. Fill the kettle with cold water up to the desired level.
3. Restart the boiling process.

Cleaning and Maintenance
To remove mineral deposits and maintain the efficiency of your kettle, you can descale it using a commercially available descaler or white vinegar:

1. Fill the kettle with 3 cups of white vinegar.
2. Add water to cover the bottom of the kettle completely.
3. Leave the solution in the kettle overnight.
4. Discard the mixture and fill the kettle with clean water up to the maximum position.
5. Boil the water and discard it. Repeat this process several times until the odor of vinegar is gone.
6. Remove any remaining stains inside the spout by rubbing with a damp cloth.

FAQ

• Q: How do I clean my kettle?
  A: To clean your kettle, follow the cleaning and maintenance instructions provided in the manual. You can use a commercially available descaler or white vinegar.

• Q: What is the maximum capacity of the kettle?
  A: The maximum capacity of the kettle is 1.7L.

• Q: What should I do if I accidentally operate the kettle without water? A: If you accidentally operate the kettle without water, the boil-dry protection function will automatically switch off the power. Allow the kettle to cool down, fill it with cold water, and restart the boiling process.

MODEL : KE5502
Read this booklet thoroughly before using it and save it for future reference.

IMPORTANT SAFETY INSTRUCTIONS

1. Read all instructions before using.
2. Before connecting the kettle to the power supply, check that the voltage indicated on the appliance (underside of the kettle & base) corresponds with the voltage in your home. If this is not the case, contact your dealer and stop using the kettle.
3. Do not let the cord hang over the edge of a table or counter or touch a hot surface.
4. Do not place on or near a hot gas or electric burner or in a heated oven.
5. Do not operate the appliance without anything in it to avoid damaging the heat elements.
6. Ensure that the kettle is used on a firm and flat surface out of reach of children, this will prevent the kettle from overturning and avoid damage or injury.
7. To protect against a fire, electric shock, or personal injury, do not immerse the cord, electric plugs, or kettle in water or other liquids.
8. While water is boiling, or just after the water has been boiled, avoid contact with steam from the spout.
9. Always take care to pour boiling water slowly and carefully without tipping the kettle too fast.
10. Be careful of refilling when the kettle is hot.
11. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
12. Children should be supervised to ensure that they do not play with the appliance.
13. Do not touch the hot surface. Use the handle or the button.
14. The attached base can not be used for other than the intended use
15. Extreme caution must be used when moving an appliance containing hot water.
16. The appliance is not a toy. Do not let the children play it.
17. The kettle is for household use only. Do not use outdoors.
18. The use of accessories, that are not recommended by the appliance manufacturer, may result in fire, electric shock or personal injury.
19. Unplug the kettle from the outlet when not in use and before cleaning. Allow the kettle to cool before putting on or taking off parts, and before cleaning the appliance.
20. To disconnect, turn any control to “off,” then remove the plug from the wall outlet.
21. If the supply cord is damaged, it must be replaced by the manufacturer its service agent, or a similarly qualified person to avoid a hazard.
22. Do not use the appliance for other than intended use.
23. The kettle can only be used with the stand provided.
24. If the kettle is overfilled, boiling water may spill out.
25. Always ensure the lid is closed and do not lift it while the water is boiling. Scalding may occur if the lid is removed during the brewing cycles.
26. This appliance is intended to be used in household and similar applications such as:
    • Staff kitchen areas in shops, offices, and other working environments;
    • Farm houses;
    • By clients in hotels, motels, and other residential-type environments;
    • Bed and breakfast type environments.
27. Save these instructions.

KNOW YOUR ELECTRIC KETTLE

BEFORE USING YOUR KETTLE

If you are using the kettle for the first time, it is recommended that you clean your kettle before use by boiling the maximum capacity of water once and then discarding the water twice. Wipe the surface with a damp cloth.
NOTE : The max capacity of the kettle is 1.7L.

USING YOUR ELECTRIC KETTLE

1. Place the kettle on a flat surface.

2. To fill the kettle, remove it from the power base and remove the lid handle to open the lid, then fill the kettle with the desired amount of water and close the lid. The water level must be within the Min and the Max level. Too little water will cause the kettle to switch off before the water has boiled.
   NOTE : Do not fill the water over the maximum level, as water may spill out of the spout when boiling. Ensure that the lid is firmly in place before plugging the power outlet.

3. Position the kettle on the power base.

4. Connect the plug to a power outlet. Press the power switch and its indicator will light up, and then the kettle starts to boil the water. The kettle will switch off automatically and the indicator will turn off once the water has boiled. If necessary, it will take you 30 seconds to wait before pressing the power switch again to re-boil the water. You may shut off the power by directly lifting the kettle from the power base at any moment to stop the boiling process.
   NOTE : Ensure that the switch is free of obstructions and the lid is firmly closed, the kettle will not turn off if the switch if be constrained or if the lid is opening.

5. Lift the kettle from the power base and then pour the water.
   NOTE : Operate carefully when pouring the water from your kettle as boiling water may result in scald, besides, don’t open the lid while the water in the kettle is hot.

6. The kettle will not re-boil until the switch is pressed again. The kettle may be stored on the power base when not in use.
   NOTE : Always disconnect the power supply when not in use.

BOIL-DRY PROTECTION
Should you accidentally let the kettle operate without water, the function of boil-dry protection will automatically switch off the power. If this occurs, allow the kettle to cool before filling with cold water before re-boiling.

CLEANING AND MAINTENANCE

Always disconnect the appliance from the power outlet and cool it down completely before cleaning.

1. Never immerse the kettle, power cord, or power base in water, or allow moisture to contact with these parts.

2. Wipe the appearance of the body with a damp cloth or cleaner, never use a poisonous cleaner.
   CAUTION : Do not use chemical, steel, wooden, or abrasive cleaners to clean the outside of the kettle to prevent gloss loss.

3. When not used or stored, the power cord may be wound under the power base.

REMOVAL OF MINERAL DEPOSITS
Your kettle should be periodically descaled as the mineral deposits in tap water may form a scale on the bottom of the kettle to make the operation less efficient. You can use the commercially available descaler and follow the instructions on the package of descaler. Alternatively, you may follow the below instructions using white vinegar.

1. Fill the kettle with 3 cups of white vinegar, then add water to the amount to cover the bottom of the kettle completely. Leave the solution in the kettle overnight.
2. Then discard the mixture in the kettle, fill the kettle with clean water to the maximum position, boil, and then discard the water. Repeat several times until the odor of vinegar has been flushed away. Any stains remaining inside the spout can be removed by rubbing with a damp cloth.

ENVIRONMENT-FRIENDLY DISPOSAL

You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working electrical types of equipment to an appropriate waste disposal center.

Shenzhen Impression E-commerce Co., Ltd
Facebook Page:www.facebook.com Website: www.aicok.cc
Add: Booth No.3H012, Trading Plaza, No.5, Huanan City, Pinghu Street, Longgang District, Shenzhen, China
Made In China

References

• Manual-Hub.com - Free PDF manuals!
• aicok.cc
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>