BONECO H700 Hybrid Air Purifier and Humidifier Instructions
- June 14, 2024
- BONECO
Table of Contents
BONECO H700 Hybrid Air Purifier and Humidifier
Product Information
Specifications
- Model : H700
- Power Consumption : [unknown]
- Operating Modes : Hybrid, Purifier, Humidifier
Product Usage Instructions
Inbetriebnahme
- Remove the front cover.
- Remove the filter holder along with the filters.
- Remove the water tank.
- Pull out the water tray along with the drum.
- Clean the water tank and water tray.
- Set the filter holder back in place.
- Remove the pre-filter.
- Insert the A681 HYBRID-Filter (pay attention to the arrow direction).
- Insert the pre-filter.
- Attach the front cover.
- Connect the power supply to the BONECO H700 first and then to the socket.
Manual Operation
To manually control the device, use the display on the BONECO H700. The
display will show various indications and actions:
- A681 HYBRID filter is consumed and needs to be replaced.
- A681 HYBRID-Filter is missing and needs to be inserted.
- Cleaning is required.
- Cleaning mode is active.
- Activate weekly planner in the app.
BONECO App Features
The BONECO app offers the following features:
- Control the operating modes: Hybrid, Purifier, Humidifier.
- Adjust the hygrostat.
- Manually dim the brightness of the display and LEDs on the power regulator.
FAQ
What are the different operating modes?
The different operating modes are Hybrid, Purifier, and Humidifier. In Hybrid
mode, the air is both cleaned and humidified. In Purifier mode, the air is
only cleaned. In Humidifier mode, the air is only humidified.
How do I replace the A681 HYBRID filter?
To replace the A681 HYBRID-Filter, follow these steps:
- Remove the front cover.
- Remove the filter holder along with the filters.
- Remove the old A681 HYBRID filter.
- Insert a new A681 HYBRID-Filter, making sure to follow the arrow direction.
- Reinsert the filter holder and filters.
- Attach the front cover.
ITEMS INCLUDED
DEAR CUSTOMER,
Congratulations on your purchase of the BONECO H700. Its hybrid design cleans
and humidifies room air in one step. Its smart control system keeps the
operating noise level to a minimum, even allowing you to use the BONECO H700
in a bedroom or baby’s room.
The BONECO H700 is designed for convenient, fully automated operation.
However, you can adjust all of its features according to your preferences and
requirements. This manual shows you how you can create your comfortable
climate.
RELIEF FROM ALLERGIES
The BONECO H700 is equipped with a triple filter system that rids the air of
odors as well as dust, pollen, and contaminants. The A681 HYBRID filter also
effectively alleviates many forms of discomfort caused by allergies, such as
hay fever or allergic reactions to dust mites and household dust.
VALUABLE INFORMATION ABOUT HUMIDITY
The right humidity is very important for our health. Dry room air in winter
leads to skin that cracks and itches. It makes your eyes and throat feel dry
while significantly affecting physical comfort. Not only does this affect
adults, it is especially true for babies, small children, and even pets. Dry
mucous membranes in winter also make us more prone to colds and other
infections.
The BONECO H700 makes these problems a distant memory. Its intelligent automatic controls always keep the air clean and the humidity at the ideal level, even in large rooms with an area of up to 150 square meters (1615 square feet). Regardless of whether it is summer or winter: Once you’ve experienced this new level of comfort, you’ll never want to go back.
ITEMS INCLUDED
OVERVIEW AND PART NAMES
LEGEND
- Front cover
- Pre-filter
- A681 HYBRID filter
- Filter holder
- Drum
- AH700 evaporator mat
- A7017 Ionic Silver Stick®
- BONECO H700
- Water tank
- Fragrance container
- Water-based
- Fan blade
- Power supply
TECHNICAL DATA
- Type designation BONECO H700
- Power supply voltage 100–240 V ~ 50/60 Hz
- Power consumption Standby: < 0.5 W
- Level 1: 2.6 W
- Level 6: 26.5 W
- Humidity output Up to 1010 g/h (6.4 gal/day)*
- Air purification performance 190 m3 /h (112 CFM) (CADR)
- For rooms up to 150 m2 (1615 sq ft)
- Water capacity 10 l (2.64 US gal)
- Dimensions L × W × H 448 × 347 × 490 mm (17.6 x 13.7 x 19.3 in)
- Operation noise level 25 – 47 dB(A)
- Weight (empty) 10.7 kg (23.6 lbs)
- Accessories A7017 Ionic Silver Stick®, A681 HYBRID filter
For operation without an A681 HYBRID filter depending on temperature and humidity
STARTING UP
- Remove the front cover.
- Take off the filter holder along with the filters.
- Remove the water tank.
- Pull out the water tray along with the drum.
- Clean the water tank and water tray.
- Insert the water tray with the drum into the appliance.
- Insert the water tank filled with tap water.
- Insert the filter holder.
- Take off the pre-filter.
- Remove the protective covering of the A681 HYBRID filter.
- Insert the new A681 HYBRID filter (observe the direction of the arrow).
- Insert the pre-filter.
- Reattach the front cover.
- Connect the power supply to the BONECO H700 first and then to the power outlet.
- Briefly press the output regulator to switch on the appliance.
MANUAL HANDLING
ABOUT MANUAL HANDLING
Manual handling works conveniently with the output regulator. The BONECO app
offers additional, extensive options for control and automation of the BONECO
appliance.
AUTO MODE
If you have never operated the BONECO appliance with the BONECO app and switch
it on for the first time, it starts up in AUTO mode. The appliance is preset
to a target relative humidity of 50 percent. The performance level is
automatically adapted to the current humidity and air pollution: The drier or
more polluted the air, the higher the performance level. When the preset
humidity is achieved and the air is purified, the appliance switches to
standby mode, which is indicated by the pulsing LED:
If the humidity drops below the set level or the air quality decreases, the BONECO appliance resumes operation.
ADAPTED AUTO MODE
If you have already operated the BONECO appliance with the BONECO app and
set a different humidity, that value is automatically taken over when the
appliance is switched on.
SWITCHING ON AND OFF
- Briefly press the output regulator once to switch on the BONECO appliance.
- The appliance is always in AUTO mode when it is switched on. You can identify active AUTO mode by the small LED that lights up above the output regulator.
- To switch off the BONECO appliance while it is in AUTO mode, briefly press the output regulator once.
MANUAL CONTROL
- Briefly press the output regulator once to switch on the BONECO appliance.
- The appliance is always in AUTO mode when it is switched on.
- Adjust the output to your needs by setting the output regulator to the desired level from 1 to 6. This action exits AUTO mode (the AUTO LED is off). The selected performance level is indicated by the number of LEDs that light up above the output regulator.
- Briefly press the output regulator once to exit manual mode and to reactivate AUTO mode.
- Briefly press the output regulator once more to switch off the BONECO appliance.
- If you exit AUTO mode, the BONECO appliance will continue at the selected performance level until the water base is empty, regardless of the current level of humidity.
INDICATORS ON THE DISPLAY
- Overview of all indicators on the display
- Indicator for air purity
- Indicator for humidity
THE BENEFITS OF THE BONECO APP
ABOUT THE BONECO APP
The “BONECO healthy air” app is used for enhanced control of the BONECO
appliance and lets you take full advantage of its potential. The app includes
functions such as a timer, a humidity preset, and the option to switch between
various programs. In addition, it provides reminders for the cleaning
intervals and other recurring tasks.
Scope of services
ADDITIONAL FUNCTIONS VIA APP
MANUAL DIMMING
The brightness of the display automatically adapts to the ambient light. If
necessary, the brightness can be regulated manually through the BONECO app.
CALENDAR
In the BONECO app, you can store up to 12 timers. These can be set
individually about comfort mode, operating mode, and the desired target
humidity and performance level.
PROGRESS
The appliance stores the average measured temperature, air quality, and
humidity over a predefined time. This data can be retrieved in the BONECO app.
DOWNLOAD
BONECO APP FOR IOS
Search the App Store for “BONECO healthy air” or scan the QR code below.
BONECO APP FOR ANDROID
Search the Google Play Store for “BONECO healthy air” or scan the QR code
below.
PAIRING WITH THE BONECO H700
GETTING READY
Make sure that Bluetooth® is activated on your smartphone. During pairing,
make sure that the smartphone is in the same room as the BONECO appliance.
Once paired successfully, you can control the BONE-CO appliance with your
smartphone from the same room or even from an adjacent room. However, the
maximum distance between smartphones and the BONECO appliances depends on the
specific structural conditions.
PAIRING
- Make sure that Bluetooth® is activated on your smartphone.
- Switch on the BONECO appliance.
- Press and hold the output regulator for about 5 seconds, until “CL” and then “bt” flashes on the display.
- Start the BONECO app.
- Follow the instructions in the app.
THE VARIOUS OPERATING MODES
HYBRID MODE (“HYBRID”)
The BONECO appliance combines two functions.
- The A681 HYBRID filter cleanses breathing air of pollen, household dust, and fine particles.
- The AH700 evaporator mat humidifies the room air.
You achieve the best results when the BONECO appliance is humidifying and purifying the air at the same time. Nevertheless, it is possible to use just one of the two functions.
HUMIDIFICATION ONLY (“HUMIDIFIER”)
Use of the A681 HYBRID filter is optional in the “Air humidification” operating mode. The BONECO H700 can also be used without an A681 HYBRID filter in the “Air humidification” operating mode. When you switch to the “Hybrid” or “Air purification” operating mode, the following symbol flashes on the display if an A681 HYBRID filter is not inserted:
PURIFICATION ONLY (“PURIFIER”)
The air is not humidified in the “Air purification” operating mode. The BONECO H700 can also be used without water in the “Air purification” operating mode. When you switch to the “Hybrid” or “Air humidification” operating mode, the following symbol flashes on the display if the water tank is empty:
- In “Hybrid” mode the LEDs are lit in white
- In “Humidifier” mode the LEDs are lit in blue
- In “Purifier” mode the LEDs are lit green
THE VARIOUS COMFORT MODES
COMFORT MODES
There are three different comfort modes available in each of the three
“Hybrid”, “Air purification” and “Air humidification” operating modes: AUTO,
SLEEP, and BABY.
AUTO MODE
In AUTO mode, the BONECO H700 uses all of the fan levels between 1 and 5. The
preset humidity is 50%.
SLEEP MODE
In SLEEP mode, the BONECO H700 can even be used in a bedroom at night. The
appliance automatically operates at the lowest fan level of 1 to keep
operating noise to a minimum. The preset humidity is 45%.
BABY MODE
The BABY mode uses fan levels 1 through 4 and increases the humidity to 60%.
This value is ideal for use in a nursery or baby’s room since higher humidity
is recommended for babies and small children. The fan also operates quietly
enough that it will not trigger a baby monitor.
CHILD-SAFETY LOCK
The BONECO H700 can be set to prevent accidental adjustments. Use this
function to prevent unintentional input, for example, from children playing
near the appliance. The child-safety lock is switched on and off using the
BONECO app. The display flashes an “LC” (LOCK) notice for a few seconds and
then returns to the original displayed content.
If the output regulator is operated after the LOCK function has been activated through the BONE-CO app, the LEDs and the display flash 3× in quick succession. If the appliance has been switched off through the BONECO app, the “LC” notice flashes 3× on the display.
DEFINING THE DESIRED HUMIDITY
PERFECT HUMIDITY
The recommended humidity level is between 40% and 60%. The default setting is
50%. The humidity you set then stays saved if you switch off the appliance.
CONTROLLING HUMIDITY
The humidity can be adjusted through the BONECO app.
REGULATING THE FAN LEVEL
The fan level can be regulated in two ways:
- Use the output regulator.
- Adjust the fan level in the BONECO app.
USING FRAGRANCES
USING FRAGRANCES
Inside the BONECO H700, there is a fragrance container for adding fragrances
in the form of essential oils. This fragrance container is made of a special
material. Never add essential oils and other fragrances directly into the
water tank or water base. It only takes a small amount to damage the appliance
irreparably. Such damage is not covered by the warranty.
ADDING FRAGRANCES
- Remove the front cover.
- Remove the filter holder along with the filter.
- Insert the fragrance into the fragrance container provided for this.
- Insert the filter holder and front cover.
NOTES ON CLEANING
ABOUT CLEANING
Regular maintenance and cleaning are necessary for trouble-free and hygienic
operation. Recommended cleaning and maintenance intervals vary depending on
air quality, water quality, and operating time. A soft cloth, dish detergent,
and a scrub brush are recommended for cleaning by hand. An upcoming need for
cleaning is indicated on the display with this symbol:
RECOMMENDED CLEANING INTERVALS
DESCALING
ABOUT DESCALING
The default setting for the descaling time is 4 hours. In most cases, you can
achieve very good results in this time. The maximum duration of descaling is
12 hours.
- Shorten the duration of descaling if the BONECO H700 is only slightly dirty.
- Lengthen the duration of descaling if the BONECO H700 is very dirty.
- After each descaling, it is necessary to clean the interior parts (see the next page).
Be sure to remove the A7017 Ionic Silver Stick® before the descaling process.
GETTING READY
- Remove the front cover and the water tank on the rear side.
- Remove the filter holder together with the filter.
- Pull the water base out and remove the drum with the AH700 evaporator mat.
- Empty the water base and water tank and remove the AH700 Ionic Silver Stick®.
- Set the drum back into the water base and put the appliance back together by following the steps in reverse order.
STARTING THE DESCALING
- Fill the tank halfway with hot tap water and add two packets of A7417 CalcOff. Insert the water tank and wait until the water base is full.
- Start the descaling mode by pressing and holding the output regulator for 3 seconds until the “CL” symbol is flashing on the display.
- Briefly press the output regulator once. The direction of descaling is displayed.
- Change the duration of descaling as needed using the output regulator.
- Briefly press the output regulator again to start the descaling process.
- The appliance then descales itself automatically. The remaining duration of descaling is shown on the display. During the cleaning process, this icon is also shown:
- After the descaling has finished, the cleaning symbol on the display goes away automatically.
- Then a flashing symbol indicates that the water in the appliance has to be replaced:
- Change the water in the water tank and the water base.
CAUTION: For the water change icon to be automatically cleared, the unit must be turned on for the entire procedure.
CLEANING THE INTERIOR PARTS
IMPORTANT NOTES
- Use a cleaning brush and a damp cloth for cleaning. Always add a small amount of dishwashing detergent to the hot water.
- Always unplug the BONECO H700 from the power outlet before you start cleaning or doing maintenance! Failure to do so can result in electric shock and fatal injury!
- Clean the inside of the BONECO H700 regularly; otherwise, mold can form, which is harmful to health.
- Do not use alcohol or corrosive cleaning agents for cleaning.
- Do not clean the BONECO H700 in a dish-
WATER TANK
- Fill the water tank halfway with hot water and add a small amount of dishwashing detergent.
- Thoroughly clean the inside of the water tank by hand or with a suitable cleaning brush.
- Also, clean the cover.
WATER-BASED
- Pull the water base out of the BONECO H700.
- Remove the drum with the AH700 evaporator mat.
- Remove the A7017 Ionic Silver Stick® and the rollers.
- Clean the water base and all of the parts inside. These can be removed for cleaning.
CLEANING THE INTERIOR PARTS
DRUM
- Take the AH700 evaporator mat out of the drum.
- Wash the drum with detergent and a cleaning brush.
- Thoroughly rinse the drum with hot water.
AH700 EVAPORATOR MAT (HANDWASHING)
- Thoroughly wash and tumble the AH700 evaporator mat with hot water and dishwashing detergent.
- Continue to rinse out the AH700 evaporator mat in clean hot water until foam no longer forms.
- Right after the washing cycle, insert the washed AH700 evaporator mat into the cleaned drum.
AH700 EVAPORATOR MAT (WASHING MACHINE)
The AH700 evaporator mat can be cleaned in the washing machine. Uses any
commercially available detergent. We recommend putting the AH700 evaporator
mat into a laundry bag or washing it separately because it will collect loose
fibers from other pieces of laundry otherwise.
- The AH700 evaporator mat may not be washed at a temperature higher than 40 °C (104 °F).
- Do not dry the AH700 evaporator mat in the clothes dryer.
When inserting the AH700 evaporator mat into the drum after cleaning, make sure it is positioned correctly.
GENERAL CLEANING
COVER
- Remove the cover.
- Clean the cover with a damp cloth.
PRE-FILTER
- Clean the pre-filter using a vacuum cleaner or wash it under running water with a cleaning brush.
Do not put the pre-filter back in until it is dry. Humidity can hurt the quality of the A681 HYBRID filter beneath it.
A681 HYBRID FILTER
The A681 HYBRID filter cannot be cleaned. The dirt is normal and shows that the filter is working.
FILTER HOLDER
- Remove the filter holder.
- Clean the filter holder with a damp cloth.
FAN BLADE
Never remove the retaining screw to take off the fan blade! A weight imbalance
during reassembly could cause excessive noise or could even damage the motor.
- Clean the fan blades with a damp cloth.
HOUSING
- Clean the inside of the housing with a damp cloth, hot water, and dishwashing detergent.
CARING FOR THE ROLLERS
After an extended period of operation, you may start hearing unwanted noise
created by the rollers in the water base. Use the provided care oil to
lubricate the rollers as needed.
- Take off the front cover.
- Remove the care oil from the cover.
- Apply 1 drop of care oil directly to each of the holders.
PARTICLE SENSOR
The particle sensor detects the amount of dirt in the air in the room by
analyzing a passing airflow. Over time, dirt can accumulate and affect
measuring accuracy. The flap over the particle sensor has to be closed during
operation to ensure the measurement is correct. It should only be opened to
clean the sensor.
- Clean the sensor lens using a damp cotton swab.
- Dry the sensor with a dry cotton swab.
ASSEMBLING THE APPLIANCE
Once cleaning is complete, you can put the BONECO H700 back together. When
doing so, pay attention to how the AH700 evaporator mat fits.
REPLACING THE ACCESSORIES
ABOUT THE A681 HYBRID FILTER
The A681 HYBRID filter has to be changed after about one year to ensure that
dirt and pollen continue to be filtered from the air. The display indicates a
pending need to replace the A681 HYBRID filter with the following symbol: The
A681 HYBRID filter is replaced according to the figures on pages 44 and 45.
You can obtain an A681 HYBRID filter from your BONECO specialist dealer or the BONECO online store at www.shop.boneco.com.
REPLACING THE A681 HYBRID FILTER
- Remove the front cover of the BONECO H700.
- Take off the pre-filter.
- Remove the used A681 HYBRID filter and dispose of it with your regular household waste.
- Remove the protective foil from the new A681 HYBRID filter.
- Insert the A681 HYBRID filter into the holder as shown on the label.
- Reinsert the pre-filter and the front cover.
DELETING A NOTICE IN THE APP
The notice can be deleted from the display in the BONECO app. DELETING A
NOTICE ON THE APPLIANCE The notice can also be deleted on the appliance.
- Press and hold the output regulator for three seconds until the “CL” notice flashes on the display.
- Use the output regulator to select the symbol.
- Briefly press the output regulator to confirm the selection.
The notice is deleted.
REPLACING THE ACCESSORIES
ABOUT THE A7017 IONIC SILVER STICK®
The A7017 Ionic Silver Stick® uses the antimicrobial effect of silver for a
significant improvement of water hygiene. It is effective as soon as water
comes into contact with it – even if the BONECO appliance is switched off.
Replace the A7017 Ionic Silver Stick® annually to guarantee antimicrobial
effectiveness. The display indicates a pending need to replace the A7017 Ionic
Silver Stick® with the following symbol: You can obtain an A7017 Ionic Silver
Stick® from your BONECO specialist dealer or the BONECO online store at
www.shop.boneco.com.
REPLACING THE A7017 IONIC SILVER STICK®
- Take off the front cover.
- Remove the water tank on the rear side.
- Remove the filter holder.
- Pull the water base out and remove the drum.
- Remove the used A7017 Ionic Silver Stick® and dispose of it with your regular household waste.
- Insert the new A7017 Ionic Silver Stick®.
- Put the parts back together by following the steps in reverse order.
DELETING A NOTICE IN THE APP
The notice can be deleted from the display in the BONECO app.
DELETING A NOTICE ON THE APPLIANCE
The notice can also be deleted on the appliance.
- Press and hold the output regulator for three seconds until the “CL” notice flashes on the display.
- Use the output regulator to select the symbol.
- Briefly press the output regulator to confirm the selection.
The notice is deleted.
MALFUNCTIONS AND TROUBLESHOOTING
FACTORY DEFAULT SETTINGS AND BLUETOOTH
ABOUT THE FACTORY DEFAULT SETTINGS
If your BONECO appliance control system does not function the way you are
expecting, or if you would like to delete all adjustments, you can reset the
appliance to the factory settings. This deletes all adjustments and settings.
After the reset, the BONECO appliance has to be paired with the smartphone again so that the control system can continue working with the app (see page 52).
RESETTING THE APPLIANCE
Press and hold the output regulator until the “Fd” (Factory default) notice
appears on the display. Now the BONECO appliance is in the same state as when
it was first started.
SWITCHING BLUETOOTH ON AND OFF
Switching Bluetooth off:
- Press and hold the output regulator for about 5 seconds until the “bt” notice flashes on the display.
- Turn the output regulator until the display shows “–” and confirm your selection by briefly pressing the output regulator again.
- Now Bluetooth is switched off. To reactivate Bluetooth, you have to have the smartphone paired again.
BONECO is a registered trademark of BONECO AG, Switzerland BONECO AG, Espenstrasse 85, 9443 Widnau, Switzerland
References
- BONECO AG - humidifier, air washer, air purifiers and Air Shower fans - Boneco
- BONECO AG - humidifier, air washer, air purifiers and Air Shower fans - Boneco
- BONECO AG - humidifier, air washer, air purifiers and Air Shower fans - Boneco
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>