Turbosound TPX122M Full Rage Loudspeaker User Guide

: June 7, 2024
: Turbosound

Table of Contents

Turbosound TPX122M Full Rage Loudspeaker
- Performer TPX Series
Important Safety Instructions
Connections
Other important information
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Turbosound

Turbosound TPX122M Full Rage Loudspeaker

product

Performer TPX Series

TPX122M
2 Way 12″ Full Range Loudspeaker and Stage Monitor for Portable PA Applications
TPX152
2 Way 15″ Full Range Loudspeaker for Portable PA Applications
TPX118B
18″ Front Loaded Subwoofer for Portable PA Applications
TPX153
3 Way Dual 15″ Full Range Loudspeaker for Portable PA Applications

Important Safety Instructions

Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear section).

No user serviceable parts inside. Refer servicing to qualified personnel.
To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Use only attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
Do not install in a confined space, such as a book case or similar unit.
Do not place naked flame sources, such as lighted candles, on the apparatus.
Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones and Cool audio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.

LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty

Thank you for choosing a Turbosound loudspeaker product for your application. If you would like further information about this or any other product, please visit our website at turbosound.com.

Unpacking the Loudspeaker

After unpacking the unit, please check carefully for damage. If damage is found, please notify your supplier at once. You, the consignee, must instigate any claim. Please retain all packaging in case of future return shipment.

System Requirements

TPX122M and TPX152 are passive 2-way loudspeakers, and TPX153 is a passive 3-way loudspeaker, all of which can be driven directly from a single amplifier channel with no controller. For optimum performance or for use with a subwoofer, they require 1 amplifier channel and 1 controller channel. The input signal is divided between the low-frequency and high-frequency drivers internally with a passive crossover.
The TPX118B subwoofer has a full-range input and link through to connect an additional subwoofer. Operation requires 1 amplifier channel and 1 controller channel.

Correct controller settings for all model’s operation, with and without subwoofers, can be downloaded from turbosound.com, and are also available as presents for the LMS series controllers. To avoid wasting amplifier power, you should use heavy-duty speaker cable with a minimum wire size of 1.5 mm² (16 AWG), and preferably 2.5 mm² (14 AWG) for longer runs. For extreme cable lengths, be aware of cable impedance and resistive losses. Always observe the correct polarity.
The TPX122M doubles effectively as a wedge monitor.

Amplifier Considerations

The TPX series loudspeakers are optimized for use with the Turbosound T series amplifiers with the LMS series controllers. A full range of DSP settings to suit any configuration are provided for download on the Turbosound website. The use of third party amplification and processing is only advised using the matrix of manual settings as well as the limiter calculator provided on the Turbosound website. The TPX series loudspeaker enclosures should be driven by high quality power amplifiers designed for true professional use. Power amplifiers should be capable of delivering long term broadband power equal to half the loudspeaker’s peak power rating at its stated nominal impedance. The use of underpowered amplifiers must be avoided as heavily clipped signals can cause permanent loudspeaker damage. Limiters, crossovers and equalisation points must be set in accordance with the settings provided on the Turbosound website. This will ensure the optimum sound quality and long-term reliability as well as protection from damage.
Neutrik speakON* NL4 locking input connector(s) are provided, allowing options for input and link through.

Connections

Connection

Models: TPX118B

Connection 2

Other important information

Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity,
you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

Specifications

Frequenc y response| 75 Hz – 20 kHz ± 3 dB

60 Hz – 20 kHz – 10 dB

| 50 Hz – 20 kHz ± 3 dB

40 Hz – 20 kHz -10 dB

| 50 Hz – 20 kHz ± 3 dB

40 Hz – 20 kHz – 10 dB

| 45 Hz – 200 Hz ± 3 dB

35 Hz – 200 Hz -10 dB

---|---|---|---|---
Nomina l dispersion| 70° H x 50° V @

– 6 dB points

| 70° H x 50° V @

– 6 dB points

| 70° H x 50° V @

– 6 dB points

| Half space
Powe r handlin g (IEC)| 250 W continuous,

1,000 W peak

| 250 W continuous,

1,000 W peak

| 500 W continuous,

2,000 W peak

| 600 W Continuous,

2,400 W peak

127 dB peak

| 121 dB continuous,

127 dB peak

| 124 dB continuous,

130 dB peak

| 126 dB continuous,

132 dB peak

Impedance| 8 Ω| 8 Ω| 4 Ω| 4 Ω

Components

| 1 x 12″ (308 mm)

LF driver

1 x 1″ (25 mm)

HF compression driver

| 1 x 15″ (388 mm)

LF driver

1 x 1″ (25 mm)

HF compression driver

| 2 x 15″ (388 mm)

LF driver

1 x 1″ (25 mm)

HF compression driver

|

1 x 18″ (460 mm)

LF driver

Connectors| 2 x Neutrik speakON NL4| 2 x Neutrik speakON NL4| 2 x Neutrik speakON NL4| 2 x Neutrik speakON NL4
---|---|---|---|---
Wiring| Pins 1 ± 1 – input,

pins 2 ± 2 – link

| Pins 1 ± 1 – input,

pins 2 ± 2 – link

| Pins 1 ± 1 – input,

pins 2 ± 2 – link

| Pins 1 ± 1- input,

pins 2 ± 2- link

Dimensions **HWD**| 582 x 424 x 328 mm

(23.0 x 16.7 x 13.0″)

| 691 x 460 x 437 mm

(27.2 x 18.1 x 17.2″)

| 1085 x 461 x 435 mm

(42.7 x 18.1 x 17.1″)

| 599 x 514 x 556 mm

(23.6 x 20.2 x 21.9″)

Hereby, Music Tribe declares that this product is in compliance with Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC, and this passive product is not applicable to EMC Directive 2014/30/EU, LV Directive 2014/35/EU.
Full text of EU DoC is available at https://community.musictribe.com/ EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark