logitech Zone True Wireless Earbuds Basic 2 User Guide

: June 7, 2024
: Logitech

logitech Zone True Wireless Earbuds Basic 2

KNOW YOUR PRODUCT

WHAT’S IN THE BOX

Left & right ear buds
Replaceable eargels (total of 3 pairs):
— Small left & right eargels without ear fins
— Medium left & right eargels with ear fins (premounted on the earbuds)
— Large left & right eargels with ear fins
Cloth travel bag
Wireless charging case
User documentation
USB-A receiver
USB-C to A adapter
USB-C to A charging cable (0 79 ft)

CHARGING

Charging via USB cable

Place the earbuds in the charging case and close the lid
Plug the USB-C cable end into the USB-C port on the front of the charging case
Plug the USB-A end into the USB-A charging port on your computer or plug the USB-A end into the USB-C adapter and plug the USB-C adapter into the USB-C port on your computer
Case light Indicator will be a pulsing, white light for charging
Case light Indicator will be solid white when fully charged
— 2 hrs 45 mins for full earbuds charge
— 3 hrs for full case charge
— 5 mins will give you 2 hrs music time (ANC off)
Earbuds can be used with receiver and Bluetooth® paired while charging

Charging via Qi wireless charger

Place the charging case on top of any Qi wireless charging pad *
Case indicator light will be a pulsing, white light when charging
Case Indicator light will be solid white when fully charged

Qi wireless charging base is not included

HOW TO SETUP YOUR DEVICE

Remove the earbuds from the charging case
Insert the earbuds into your ears

PAIR TO COMPUTER VIA USB RECEIVER

USB-A
Insert the USB-A receiver into the computer USB-A port
USB-C
Insert the USB-A receiver into the USB-C adapter Then insert the adapter into the computer USB-C port
Earbuds are pre-paired to the receiver included in the box Once successfully paired, the light indicator on the receiver will remain solid

PAIR TO SMARTPHONE VIA BLUETOOTH®

Press the Bluetooth® pairing button in the charging case for 3 seconds Earbud light indicator will flash white rapidly
Open Bluetooth® settings on your device
Select Zone True Wireless in discoverable devices
Once successfully paired, the light indicator will turn solid white

FIND YOUR PERFECT FIT

For optimized performance of ANC and comfort , select among the three eargel sizes (S, M, L) to find the ones that best fit your ears Earbuds ship with medium eargels

Place the earbuds firmly within your ears Adjust angle and depth of the earbuds for the best seal and comfort
Size down if you feel too much pressure on your ear, or size up if the earbuds are too loose

— Note: It is common to use different sized eargels for different sides of your ears
Fit Trial

— The earbuds should remain secured and tight even after shaking your head in all directions
— Play the same music as a fair comparison of noise isolation

CALL AND MUSIC CONTROLS

For UC:

| Call situations|

Non-call situations

---|---|---

Action

|

Left earbud

|

Right earbud

|

Left earbud

|

Right earbud

Short press

|

Answer / End call

|

Play / Pause

|

–

2 seconds press

|

Reject call

|

Next song

|

–

Double taps

|

Mute on / of

|

ANC / Transparency Toggle

Customizable in Logi Tune

|

Volume up/down

For Microsoft
Teams:

| Call situations| Non-call situations
---|---|---
Action| Left earbud| Right earbud| Left earbud|

Right earbud

Short press

| Answer / End call| Play / Pause| invoke Teams

2 seconds press

| Reject call| Next song|

Invoke Team

Double taps

| Mute on / of| ANC / Transparency Toggle
Customizable in Logi Tune|

Volume up/down

Note :
– Teams activities are only functional when Teams is running on an unlocked computer
– Media control functionality depends on type of application
– Call activities are always the first priority When two Bluetooth® devices are connected, the last active device will override the other

Tip : Button customizations and Music EQ controls available in Logi Tune

ACTIVE NOISE CANCELLATION (ANC)

ANC blocks out the noise around you to help you concentrate on the task at hand

Double tap the left or right earbud under non-call situations to switch between ANC and Transparency mode
There will be a voice prompt when turning ANC or Transparency mode on
You can also switch between ANC and Transparency mode via Logi Tune

EARBUD LIGHT INDICATOR

Controlling busy light via Logi Tune

Busy light is disabled by default To activate it:

Open Logi Tune
Select “Settings” tab
Click on “Busy light” and select “Active on call”

Earbud

|

Status

---|---

White

| Flashing| Bluetooth® pairing mode
Solid|

Active call*

Download Logi Tune to activate the busy light

RECEIVER LIGHT INDICATOR

For UC:

For Microsoft Teams:

Light

|

Status

CASE LIGHT INDICATOR

Left LED light: Battery status of the left earbud
Middle LED light: Battery status of the charging case
Right LED light: Battery status of the right earbud

State| Light|

Status

---|---|---
Plugged into power source| White| Solid| Fully charged
Pulsing| Not fully charged
Inserting buds in the case| White| Pulsing for 3 seconds| Earbud inserted in the case
Case button pressed and released (earbuds in the case)| White| Solid for 3 seconds| Fully charged
Pulsing for 3 seconds| Charging
Red| Solid| Case battery <20%
Case button pressed and released (no earbuds in the case)| White (All lights on)| Solid for 3 seconds| Case battery between 80-100%
White (Middle and left light on)| Case battery between 50-79%
White (Left light on only)| Case battery between 20-49%
Red| Case battery <20%
Others| White| Blinking| Pairing mode
Red| Blinking while in over-the-air (OTA) mode| Device firmware update
Pulsing| Charging error
White| Blinking while in pairing mode and blinking WHITE 3 times to confirm factory reset| Factory reset

LOGI TUNE

| |

Logi Tune helps boost your earbud performance with periodic software and firmware updates
Learn more and download Logi Tune at www.logitech.com/tune, the Apple App Store® or Google Play™ store

ADJUSTING SIDETONE

Sidetone lets you hear your own voice during conversations so you are aware of how loud you are talking In Logi Tune, select the sidetone feature, and adjust the dial accordingly
– A higher number means you hear more external sound
– A lower number means you hear less external sound

AUTO SLEEP TIMER

By default, your earbuds will automatically power off when not in use for one hour Adjust the sleep timer in Logi Tune

RECONNECT EARBUDS

Reconnect earbuds to receiver via Logi Tune

Plug USB-A receiver into computer
Open Logi Tune
Select the receiver from the dashboard Press “Reconnect earbuds”
To initiate Bluetooth® pairing, press and hold the Bluetooth® pairing button in the charging case for 3 seconds The light indicator on the receiver will flash white
Once successfully paired, the light indicator on the receiver will remain solid white

FACTORY RESET

Place the left and right earbuds in the charging case
Press the Bluetooth® pairing button in the case for 15 seconds
The case light indicators will blink 3 times in white to confirm the reset

DIMENSIONS

Earbuds:
Height x Width x Depth: 15 9 x 27 4 x 26 3 mm Weight (a pair of earbuds): 13 g

Charging case:
Height x Width x Depth: 25 0 x 39 8 x 74 5 mm Weight: 46 g

Receiver:
Height x Width x Depth: 21 5 x 13 6 x 6 0 mm

Adapter:
Height x Width x Depth: 25 2 x 16 5 x 9 5 mm

SYSTEM REQUIREMENTS

Works with common calling applications across almost all platforms and operating systems
Works with Windows®, Mac, or Chrome™ based computer via USB-C, USB-A, Bluetooth® and iOS or Android™ Bluetooth® enabled devices

TECHNICAL SPECIFICATIONS

Microphone Type : Omni-directional, dual MEMS mics array with beamforming plus an inward-facing mic
Frequency response (Earbuds) : 20-20kHz (music mode), 100 8kHz (talk mode)
Frequency response (Microphone) : 100-8kHz
Battery type : Built-in battery (Lithium ion)
Battery life (talk time) : Up to 6 hrs (ANC on), up to 6 5 hrs (ANC off)
Battery life (listening time) : Up to 7 hrs (ANC on), up to 12 hrs (ANC off)
Bluetooth® version : 5 0
Wireless range : Up to 30 m / 100 ft (open field line of sight) Qi Wireless charging enabled
USB-A to C charging cable : 0 79 ft (24 cm)

© 2021 Logitech Logitech, Logi and the Logitech logo are trademarks or registered trademarks of Logitech Europe S A and/or its aliates in the U S and other countries Apple and the Apple logo are trademarks of Apple Inc , registered in the U S and other countries and regions App Store is a service mark of Apple Inc Google Play and the Google Play logo are trademarks of Google LLC
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc and any use of such marks by Logitech is under license