HUFFY M0782 Canopy Trike with Push Handle, Cup Holder and Rear Storage Owner’s Manual

: June 7, 2024
: HUFFY

Table of Contents

Safety and Warning Information
Parts Assembly
Assembly
MAINTENANCE
Limited Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HUFFY M0782 Canopy Trike with Push Handle, Cup Holder and Rear Storage

| This manual contains important safety, assembly, operation and maintenance information. Please read and fully understand this manual before operation.
Save this manual for future reference.
---|---
| Always wear approved helmet and safety equipment when using this product.

TOOLS RECOMMENDED: Metric Allen Wrenches, Phillips Screwdriver, Adjustable Wrench

STROLLER 1.5-2 YRS

|

CHILD STEER 1.5-2 YRS

|

ASSIST TRIKE 2-3 YRS

|

STANDARD TRIKE 3 YRS

---|---|---|---
WARNING TO AVOID SERIOUS INJURY: Product Specific Warnings:

This product should only be used by persons 1.5-3 years.
Maximum rider weight for this product is 27kg. (60 lbs).
Do not allow a child to ride in the rear bin (if equipped).
Maximum weight for rear bin is 2.3 kg. (5 lbs).

ALWAYS WEAR YOUR HELMET WHEN RIDING THIS PRODUCT!
Always read the user manual that comes with your helmet to make sure it is fitted and attached properly to the wearer’s head according to the fitting instructions described in the user manual.

Safety and Warning Information

This product, like all wheeled vehicles, will provide safe, enjoyable transportation and recreation when used and maintained properly. Like bicycling, skateboarding, and in-line skating, riding this product can be dangerous even under the best of circumstances. We do not want you to get hurt. Please follow these safety rules. Keep children away during assembly.

| This symbol is important. It is the WARNING symbol. The warning symbol precedes safety instructions. Make sure the child understands these instructions. Failure to follow these instructions may result in injury to the rider or to others, or damage to the product.
---|---

WARNING TO AVOID SERIOUS INJURY:

Adult assembly required. An adult must unfold and fold this product (as equipped).
Continuous adult supervision required. Do Not modify the product.
CHOKING HAZARD: Small parts.
Keep small loose parts and plastic bags out of the reach of children.
CAUTION: Foam pieces may break off and pose a choking hazard. Keep small children away when assembling.
Never use near motor vehicles.
Never ride with more than one person. Excessive weight may cause a
hazardous or unstable condition.
Protective Equipment must be worn: Always wear safety equipment such as a helmet that meets CPSC (or equivalent standard for your country) with chinstrap securely fastened, knee pads, elbow pads, wrist guards, gloves and shoes.
Do not use in traffic.
Do not allow a child to ride the product at dusk, at night or at times of limited visibility.
Do not allow a child to ride on roadways or alleys.
Do not allow a child to ride off road, on grass or wet surfaces.
Never use near streets, swimming pools (or other bodies of water), hills, steps, or sloped driveways.
For use on smooth paved surfaces only.
Understand all operating procedures before use.
Do not tow or pull any objects with the product.
Do not push or pull a child riding on the product.
Use with caution, since skill is required to avoid falls or collisions causing injury to the user or third parties.
Always comply with local laws and regulations.
If anything does not operate properly, discontinue use.
Replace worn or broken parts immediately with genuine replacement parts.
Handlebar hand grip or tube end plugs should be replaced if damaged as bare tubes have been known to cause injury. All products with capped handlebar ends should be checked regularly to ensure that adequate protection for the ends of the handlebars are in place.
Self-locking nuts and other self-locking fixings may lose their effectiveness when re-used.

Parts Assembly

Assembly

QUICK ASSEMBLY GUIDE

ASSEMBLE AND REMOVE PARENT HANDLE

Insert top section of Parent Handle into Lock Collar and tighten Lock Collar hand tight.
Push collar up on Handle as shown.
Insert end of Handle into frame mount.
Line up Handle pegs with slots in frame mount .
Press firmly down until Handle LOCKS into place. Gently pull up to check Handle does not come loose.
Slide down collar and snap in place.
To REMOVE Parent Handle, push IN Release Tab while pulling UP on Handle.

ADJUST PARENT HANDLE HEIGHT

To adjust Parent Handle B height, loosen Lock Collar E, position Parent Handle to a comfortable height, then tighten Hand Clamp securely

ASSEMBLE AND REMOVE CANOPY

Remove Canopy assembly by loosening and removing two Lock Knobs and bolts .
Pull Canopy Arms out and away from Trike.
Store Lock Knobs and bolts in plastic bag and keep with Canopy top.

To re-assemble , follow these steps in reverse order.

ASSEMBLE AND REMOVE CANOPY TOP

To remove only the Canopy top, loosen Clamp Collars fully.
Lift out Canopy top as shown.
Insert Plugs fully into clamp collar opening and tighten collars hand tight.

To re-assemble, follow these steps in reverse order

OPENING SIDE SUPPORT: To open safety bracket when placing child into trike, push back center support covering , unsnap side cover , then press lock button IN and swing side support open.

CAUTION: When snapping safety bracket closed make sure button snaps firmly locked. Gently pull on side support to make sure it does not come loose. RE-snap side cover .

FOLDING FOOTRESTS

Pull collar down.
Rotate Foot Rest back.
Fold Pedals forward.
Reverse steps to unfold pedals.

PHONE/TABLET HOLDER (if equipped)

Install the phone/tablet holder around the handlebar using rubber spacers as needed. Securely tighten with clamp knob .
Place the phone/tablet in the holder and tighten the clamp firmly so that it does not come loose.

BOTTLE HOLDER (if equipped)

Install by sliding bottle holder down into slotted mount until it snaps locked.
Remove by pressing back tab and pulling bottle holder up.

CAUTION: Do NOT carry hot liquids in bottle holder.

MAINTENANCE

The scooter should be checked periodically for any loose, broken, or worn parts. Tighten any parts that are loose, and replace any worn or broken parts immediately. Periodic cleaning will prolong the useful life of this scooter.

SELF-LOCKING FASTENERS:
With repeated use, Self-Locking Fasteners may loose their ability to lock to the threads and may come loose. Frequently check Self-Locking Fasteners and replace when worn.

INSPECTION OF THE BEARINGS:

Frequently check the wheel bearings of the product. Replace the wheels when the bearings do not pass the following tests:
Lift each end of the product off the ground and spin the raised wheel by hand:

The wheel should spin freely and easily.
There should be no side-to-side movement at the wheel edge when pushed to the side with light force.

WEEKLY SERVICE:

Apply a few drops of general purpose oil to the sides of each wheel axle. Verify that the axle fasteners are tight.

COVER WASH/CARE INSTRUCTIONS (DO NOT WASH ON VEHICLE):

Delicate/Hand wash, cold. Mild soaps.
Only cover can be washed.
Do not bleach.
Air dry only.
Do not iron.

Limited Warranty

General:

Part or model specifications are subject to change without notice.
This Limited Warranty is the only warranty for the product. ALL WARRANTIES OTHER THAN STATED HEREIN ARE DISCLAIMED INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TO THE EXTENT ALLOWABLE BY APPLICABLE LAW. ALL LIABILITY FOR INCIDENTAL, PUNITIVE, SPECIAL, OR CONSEQUENTIAL DAMAGES ARE EXPRESSLY DISCLAIMED, TO THE EXTENT ALLOWABLE BY APPLICABLE LAW.
The only uses for this product are described in this manual.
Warranty registration is not required.
The Limited Warranty extends only to the original consumer and is not transferable to anyone else.

What does this Limited Warranty cover?
This Limited Warranty covers defects in workmanship and materials for all parts of the product except those indicated below as not warranted.

What must you do to keep the Limited Warranty in effect?

This Limited Warranty is effective only if:

• Product is completely and correctly assembled.
• Product is used under normal conditions for its intended purpose (see the following section for excluded activities).
• Product receives all necessary maintenance and adjustments.
• Product is used for general transportation and recreational use only.

What is not covered by this Limited Warranty?
This product is designed for recreational use only.
This Limited Warranty does not cover normal wear and tear, normal maintenance items, or any damage, failure, or loss that is caused by improper assembly, maintenance, adjustment, storage, or use of the product. This Limited Warranty does not extend to future performance.

This Limited Warranty will be void if the product is ever:

Used in any competitive sport
Used for stunt riding, jumping, aerobatics or similar activity
Modified in any way
Modified with the addition of a motor
Ridden by more than one person at a time
Rented, sold, or given away
Used in a manner contrary to the instructions and warnings in this Owner’s Manual

What will The Manufacturer do?
Manufacturer’s sole and exclusive obligation under this Limited Warranty is to repair and/or replace, at its sole option, any covered defect in workmanship or materials.

How do you get service?
Contact the Customer Service Department.

See included list for Customer Contact information.

What rights do you have?
This Limited Warranty gives you specific legal rights. You may also have other rights which vary from state to state, region to region.

For how long does this Limited Warranty last?

When used in this Limited Warranty, the phrase “for life” means for as long as the original consumer owns the product.
Frame/Fork: six months
Wheels: 90 days
All other parts- six months

[ USA ]

PLEASE – BEFORE RETURNING TO STORE: Contact Huff y Customer Service.
We are glad to assist you with any parts or assembly problems you might have!