HUFFY 20 in Mountain Bike in Blue for Kids Instruction Manual
- June 12, 2024
- HUFFY
Table of Contents
**HUFFY 20 in Mountain Bike in Blue for Kids Instruction Manual
**
THE INSTRUCTION
- WE WANT TO DRAW AT TENTION TO THE PARENTS PLEASE READ THE INSTRUCTION CAREFULLY BEFORE USE,
- THIS INSTRUCTION APPLIES TO THE BICYCLE FOR CHIL DREN OF FIVE SERIES INCLUDED 12″,14″,16″, 18″AND 20″ (BMX BICYCLE 15 CONTAINED)
THE PICTURE OF MAIN PARTS FOR THE BICYCLE
ASSEMBLY
FITTING THE HANDLEBA
RELEASE THE HUB, THEN PUT THE HANDLE BAR INTO THE TUBE IN FRONT OF THE BRACKET, ADJUST THE DEPTH TO ARRANGE THE DIRECTION OF HANDLEBAR, MAKING THE HANDL EBAR VITIZING WHEN, THE BICYCLE MOVE FORWARD. TIGHTEN THE FIXED BOWL AND THE HUB UNTIL THE HANDLEBAR CANT TURN AROUNDFREELY IN THE FRONT FORK, (TIGHTEN THE STEM BINDER BOLT TO 15N.m TORQUE)
FITTING THE AUXILIARY WHEEL
REMOVE THE PLASTIC COVER, NUT AND POSITIONED BRACKET SEPERATELY, IN TURN FIT THE AUXILIARY WHEEL. POSI-TIONED BRACKET AND NUT. AND MAKE POSITIONED BRACKET TO ITS PLACE,AND TIGHTEN THE NUT.(THEN TIGHTEN THE NUTS TO 30N.m TORQUE EACH)
FITTING THE SADDLE
PUT THE STANDING TUBE INTO THE CLAMP OF BRACKET, AND ADJUST THE DEPTH. CENTRALIZING THE DIRECTION OF THE SADDLE, AND TIGHTEN THE NUT, (TIGHTEN THE STEM BINDER BOLT TO15N.m TORQUE)
FITTING PEDAL
USE THE SPIDER ESPECIALLY FOR BICYCLE, AND PUT THE PEDAL MARKED WITH R JNTO THE RIGHT CRANK, AND IN SAME WAY PUT THE PEDAL MARKED WITH RIN TO THE LEFT CRANK.
FITTING FRONT WHEEL
PUT THE FRONT WHEEL INTO THE LEG OF THE FORK, FHE HOOK OF SAFETY GASKET MUST BE CONNECTED WITH THE HOLE OF FORK CONNECTION, THE RING IS FITTED INTO THE LEVER OF FRONT WHEEL. ADJUST THE DISTANCE BETWEEN FRONT WHEEL AND BRACKET OF TWO SIDES AND MAKE IT SAME TIGHTEN THE NUT, (USE ADJUSTABLE WRENCH TO TIGHTENTHE AXLE NUTS TO 18N .m TONGUE EACH.)
ADJUSTING THE SADDLE
LOOSE THE NUT OF SADDLE PIN, ADJUST THE HEIGHT OF HCRIZEN AND DIRECTION OF SADDLE. MAKE FRONT WHEEL, SADDLE AND REAR WHEEL AT THE SAME LINE.
USE AND PROTECTION
- LOOSE THE NUT OF SADDLE PIN, ADJUST THE HEIGHT OF HORIZEN ACCORDING TO HEIGHT OF RIDER. ADJUST THE HEIGHT OF THE HANDLEBAR, AND ADJUST THE DEPTH. MORE THAN 5CM
- THE NEW CIRCLE SHOULD BE ACCEPTED A COMPREHENSIVE CHECK AFTER USING ONE WEEK OR so. AND TIGHTEN THE SCREW AND NUT OF ALL PARTS TO GUARANTEE ITS NORMAL OPERATION.
- AS TO THE MOVING PARTS, IT SHOULD REMAIN THE EXCELLENT STATE OF LUBRICATION TO EXTEND THE LIFESPAN OF USE, IN GZNERAL, IT SHOULD BE REMOVED AND FITTED EACH HALF A YEAR, AND ADD NEW OIL