EverBilt 1004162175 Pedestal Pump User Guide
- June 7, 2024
- Everbilt
Table of Contents
EverBilt 1004162175 Pedestal Pump
Read your manual for installation, operation, and safety information. This guide neither supplements nor replaces the Owner’s Manual.
Pedestal Pump
(Pump pictured is typical)
- Attach discharge pipe to the pump discharge. Drill a 1/8” anti-airlock hole as shown.
- Connect a check valve to the discharge pipe. Be sure the flow is away from the pump.
- Ensure Pit/Basin is clear of all debris. Lower the pump into the center of the sump pit or sump basin. Pit/Basin should be at least 12” diameter and 18” deep.
- Plug into a GFCI protected outlet.
- Check the pump’s operation by filling the sump pit or basin with water.
NOTE: The Float Switch comes pre-assembled. Refer to your owner’s manual if you need to adjust the ON and OFF position of the float switch.
For Professional Technical Support call 1-844-241-5521
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>