J J Electronics LPL-F1CW-120-200-PSQ Color Splash XG Series LED Pool and Spa Light Fixture User Guide

J J Electronics LPL-F1CW-120-200-PSQ Color Splash XG Series LED Pool and

Spa Light Fixture

Technical Support

Phone: 800.735.4553 ext. 242 For more information about this or other J&J Electronics lighting products, please visit www.jandjpoolspa.com

Color Splash XG Series installation manual and operation guide for following part numbers series only: LPL-F2C-XXXX and LPL-S2C-XXXX

Color Splash® XG Series LED Pool and Spa Light Fixtures

Available in 120VAC and 12VAC models
Color Splash XG Series LED pool and spa light fixtures offer superior, color illumination for your pool and spa. This owner’s manual contains important information on installing and using your new Color Splash XG Series LED pool and spa light fixture. Read and follow all instructions contained in this manual. Please keep it in a safe place for future reference.

Color Splash XG Series LED Pool and Spa Light Fixture Niche Compatibility

• Pentair®: 78210400, 78210500, 78210600, 78210700, 79206700
• Hayward®: SP0604C, SP0600U
• Jandy®: PLNICLRG, SSNICLRG1R, SSNICLRG1S
• Jacuzzi®: 94131234
• Sta-Rite® SwimQuip®: PSQ Faceplate Version Only
• Pentair®: 78244200, 78244300, 78243200, 78243300, 79206600
• Hayward®: SP0606C, SP0610C
• Jandy®: PLNICSM, SSNICSM1R

COLOR SPLASH XG SERIES LED ENHANCED FUNCTIONALITY WITH CERTAIN PENTAIR® AND JANDY® AUTOMATION SYSTEMS.
Certain Pentair® and Jandy® automation systems have a mode setting for controlling “Pentair IntelliBrite® 5g LED Color” light fixtures. This setting can also be used to operate Color Splash XG Series LED light fixtures. When the Pentair and Jandy automation system is set to “IntelliBrite” mode, users will NOT see XG series proprietary colors and show names displayed on the control screen. (See J&J’s cross reference guide to assist users with selecting XG Series light shows and colors on automation systems set to “IntelliBrite” mode.) NOTE: J&J’s Color Splash XG Series LED Pool and Spa light fixtures will not synchronize with any other manufacturer’s pool or spa light fixtures.

Warning!
Color Splash XG Series LED lighting is NOT compatible with the Pentair® IntelliBrite® Controller (Part Number: 600054). Installation of J&J’s XG series LED light fixture with an IntelliBrite controller will permanently damage the J&J light fixture and VOID J&J’s warranty

DANGER! FAILURE TO PROPERLY INSTALL AND USE THIS PRODUCT CAN RESULT IN SERIOUS BODILY INJURY OR DEATH.

WARNING! Comply with all related codes for the installation and use of this product. Most states and local codes regulate the construction, installation, and operation of public pools and spas, and the construction of residential pools and spas. It is important to comply with these codes, many of which directly regulate the installation and use of this product. Consult your local building and health codes for more information

INSTALLER NOTICE : This Installation and Operation Guide contains important information about this LED light. Be sure to give this guide to the owner and/or operator of the LED light for reference regarding the proper installation, operation and use of this product.

WARNING! Before installing or using this light, read all warnings and instructions contained in this manual. Read and follow all warning notices and instructions contained in this guide before installing or using the product. Severe injury, death or property damage may result if the warnings and instructions contained in this manual are not followed.

WARNING! Risk of electrical shock or electrocution Always disconnect power to the pool and/or spa light at the circuit breaker panel before attempting to service the light. Failure to do so could result in serious injury or death due to electrical shock. Installation must be performed in accordance with all applicable federal, state & local installation codes and ordinances by a licensed or certified electrician or a qualified pool professional. Improper installation may result in death or serious injury to pool and/or spa users, installers or others due to electrical shock. In addition, improper installation may cause property damage. This device is not intended for use in anything other than in-ground pools/spas.

WARNING!
Important Safety Information for Light Installation Do not, under any circumstances, splice wire underwater or behind the light niche during the installation of this light.

INSTALLER NOTICE: This light’s external cord cannot be replaced and should be handled with care. Any damage to this external cord necessitates replacing the light.

RATED FIXTURE LIFE: The illumination generated by Color Splash XG Series LED light fixtures are based on Light Emitting Diode (LED) technology. The average expected fixture life is rated 50,000 elapsed time hours under normal operating conditions. Pool Water Temp: 33°F to 97°F (1°C to 36°C), humidity: 0-95% noncondensing.

COLOR SPLASH XG SERIES LED POOL AND SPA LIGHT FIXTURES INSTALLATION (NEW

POOL AND/OR SPA CONSTRUCTION)

The following steps detail installation of the Color Splash XG Series LED light fixture into a new pool and/or spa construction. Read this section in its entirety prior to beginning any installation.

INSTALLER NOTICE : A licensed electrician must complete the following steps prior to installation of this light in a new pool or spa construction

WARNING! Confirm that the pool and/or spa meets all current National Electrical Code (N.E.C.) Article 680-22 requirements and any applicable local codes or ordinances. The electrical system must be installed by a licensed or certified electrician to meet or exceed those requirements prior to installation of the light. This includes, but is not limited to, the following National Electrical Code requirements:

• Installation of a ground fault circuit interrupter (GFCI) for line voltage models on the lighting circuit with an appropriately rated circuit breaker
• A junction box or low voltage transformer is located at least 8 inches above the maximum pool water level and at least 48 inches from the pool edge; reference Figure 1.
• Proper electrical bonding of the light fixture and all metal items within 5 feet of the pool
• Proper wet niche installation with the top edge of the underwater light’s lens at least 18 inches below the surface of the water in the pool and not more than 20” in Canada; reference Figure 1.
• Proper electrical wet niche bonding and grounding using the #8 AWG ground connector at the rear of the niche; reference Figure 1.

NEW CONSTRUCTION INSTALLATION STEPS (ONCE ALL ELECTRICAL REQUIREMENTS ARE

MET)

1. Feed the fixture cord through the conduit to the junction box. Be sure to leave at least four (4) feet of cord at base of the fixture to coil around the light to ensure ease of servicing once the pool and/or spa is filled; reference Figure 1.

2. At the junction box, cut the cord. Be sure to leave at least six (6) inches of cord for making connections.

3. Carefully strip the outer cord jacket to expose six (6) inches of the underlying three insulated wires.
   WARNING! Do not operate this light for more than two minutes without completely submerging it in water. Failure to do so can result in permanent damage to the light. If the light is operating without being fully submerged in water, the light’s circuitry will automatically shut down for a cooling period before powering back on within 10 minutes to prevent damage to the light.

4. Connect these three (3) wires to their corresponding junction box circuit wires and secure the junction box cover in place
   WARNING! Use only the stainless steel pilot screw provided with this underwater light. This special pilot screw secures and electrically grounds the fixture to the mounting ring and wet niche. Failure to install the stainless steel pilot screw provided could create an electrical shock hazard, resulting in death or serious injury to pool users, installers or others.

5. Using the stainless steel pilot screw provided, install the Color Splash XG series fixture assembly into the niche, carefully tightening the pilot screw. (Reference Figure 1)

6. Fill the pool to completely submerge the light prior to operating the light. Do not operate light out of water, this may cause damage to the light.

7. Make a final check to confirm proper light operation by switching “on” the main switch or circuit breaker and the light switch. The light should illuminate when power is switched “on”. If the light is not operating, go back to Step 1 to recheck each installation step for proper completion.

COLOR SPLASH XG SERIES LED POOL AND SPA LIGHT FIXTURE INSTALLATION

(EXISTING POOL AND/OR SPA)

Danger! Risk of electrical shock or electrocution

Installation of this light must be completed by a licensed or certified electrician or a qualified pool professional in accordance with the National Electrical Code and any applicable local codes and ordinances. Improper installation may result in death or serious injury to pool users, installers or others due to electrical shock. In addition, improper installation may cause property damage. Always disconnect power to the pool and/or spa light at the circuit breaker panel before attempting to service the light. Failure to do so could result in serious injury or death due to electrical shock. Confirm that the pool or spa meets the current National Electrical Code requirements and any applicable local codes or ordinances. The electrical system must be installed by a licensed or certified electrician to meet or exceed those requirements prior to installation of the light. This includes, but is not limited to, the following National Electrical Code requirements:

• Installation of a ground fault circuit interrupter (GFCI) for line voltage models on the lighting circuit with an appropriately rated circuit breaker.
• A junction box or low voltage transformer is located at least 8 inches above the maximum pool water level and at least 48 inches from the pool edge; reference Figure 1.
• Proper electrical bonding of the light fixture and all metal items within 5 feet of the pool and/or spa.
• Proper wet niche installation with the top edge of the underwater light’s lens at least 18 inches below the surface of the water in the pool and not more than 20” in Canada; reference Figure 1.
•  Proper electrical wet niche bonding and grounding using the #8 AWG ground connector at the rear of the niche; reference Figure 1.
• The wet niche is properly electrically bonded and grounded via the No. 8 AWG ground connector located at the rear of the niche; see Figure 1.

EXISTING CONSTRUCTION INSTALLATION STEPS (ONCE ALL ELECTRICAL

REQUIREMENTS ARE MET)

The following steps detail installation of the Color Splash XG Series LED light fixture into an existing pool. Read this section in its entirety prior to beginning any installation.

WARNING! Pool or spa electrical system must meeting current code requirements. Failure to bring the pool and/or spa electrical system up to current code requirements prior to light installation may create an electrical shock hazard resulting in death or serious injury to users, installers, or others due to electrical shock, and may also cause property damage

1. Disconnect the main electrical switch or circuit breaker and the switch which operates the installed light.

2. Remove the existing light per the original manufacturer’s instructions. Place the light fixture on the deck.

3. Leaving the light fixture on the deck, cut the light cord. Be sure to leave at least six (6) inches of cord in order to connect it to the replacement light cord. Discard the light fixture.

4. Remove the existing cord by pulling it up out of the niche and onto the deck. Carefully strip the outer cord jacket to expose six (6) inches of the underlying three insulated wires
   WARNING! Use only the stainless steel screw provided with this underwater light. This special pilot screw secures and electrically grounds the fixture to the mounting ring and wet niche. Failure to install the stainless steel pilot screw provided could create an electrical shock hazard, resulting in death or serious injury to pool users, installers or others.

5. Tape the three existing light wires to the replacement light cord with electrical insulating tape. Avoid wrapping too much tape around the cords. Otherwise, the thickness will be too great for the cord to be able to be pulled through the conduit to the junction box.
   INSTALLER NOTICE : This light’s external cord cannot be replaced and should be handled with care. Any damage to this external cord necessitates replacing the light.

6. After removing the junction box cover, disconnect the light fixture wires. Then, pull the cord through the conduit until it is visible in the junction box conduit. Remove the tape from the cords and separate the wires.

7. Carefully strip the outer cord jacket from the new light cord to expose six (6) inches of the underlying three insulated wires.

OPERATION FOR 120VAC AND 12VAC COLOR SPLASH XG SERIES LED POOL AND SPA

LIGHT FIXTURES

Color Splash XG Series LED Pool and Spa light fixtures are operated through the light’s switch. No special controller or interface is required*. Use a junction box to connect and operate multiple lights with a single switch. COLOR SPLASH XG SERIES LED ENHANCED FUNCTIONALITY WITH CERTAIN PENTAIR® AND JANDY® AUTOMATION SYSTEMS. Certain Pentair® and Jandy® automation systems have a mode setting for controlling “Pentair IntelliBrite® 5g LED Color” light fixtures. This setting can also be used to operate Color Splash XG Series LED light fixtures. When the Pentair and Jandy automation system is set to “IntelliBrite” mode, users will NOT see XG series proprietary colors and show names displayed on the control screen. (See J&J’s cross reference guide to assist users with selecting XG Series light shows and colors on automation systems set to “IntelliBrite” mode.)

NOTE : J&J’s Color Splash XG Series LED Pool and Spa light fixtures will not synchronize with any other manufacturer’s pool or spa light fixtures.

Warning!
Color Splash XG Series LED lighting is NOT compatible with the Pentair® IntelliBrite® Controller (Part Number: 600054). Installation of J&J’s XG series LED light fixture with an IntelliBrite controller will permanently damage the J&J light fixture and VOID J&J’s warranty

XG SERIES: LIGHT SHOWS, SOLID COLORS AND FUNCTIONS

Color Splash XG Series LED light fixtures are pre-programmed and synchronous with each other while offering a wide array of lighting effects and options. They offer seven different light shows (1-7) and five solid colors (8-12) to choose from; as well as a Color Lock (13) and Return (14) feature which allows you to “lock” the light on a color shown during an active light show and can return to the last locked color effect. XG LED Light Fixture features are selectable by turning the existing pool light power switch off and on, known as power cycling.

LIGHT SHOWS
Your Color Splash XG Series LED Light fixture has seven light shows from which you can choose. (See full description of light shows on page 10)

1. Peruvian Paradise

2. Super Nova

3. Northern Lights

4. Tidal Wave

5. Patriot Dream

6.  Desert Skies

7. Nova
   SOLID COLORS
   Your XG Series LED light fixture has five colors available for you to experience. Available colors are:

8. Parisian Blue

9. New Zealand Green

10. Brazilian Red

11. Arctic White

12. Miami Pink
    COLOR LOCK AND RETURN
    Your XG LED light fixture can stop a light show and “color lock” on a color shown during an active light show and can also return to the last locked color effect.

13. Color Lock

14. Return

XG SERIES LIGHTING OPERATION: HOW TO CHANGE LIGHT SHOW, SELECT SOLID

COLORS AND FUNCTIONS

CHANGE LIGHT SHOW
Changing XG light shows: Power cycle pool light switch off/on as many times needed to match the desired light show’s specified number. Example: If you are on (10) Brazilian Red and want to display (3) Northern Lights light show, power cycle three (3) times to select and activate Northern Lights.

SELECT SOLID COLORS
Similar to selecting an XG light show, power cycle pool light switch off/on as many times needed to match the desired solid color’s specified number. Example: If you are on (6) Desert Skies and want to display (11) Arctic White, power cycle eleven (11) times to select and display Arctic White.

NOTE : During power cycle process, before the selected light show or color is displayed, temporarily their will be no illumination. This is normal during the switching process.

COLOR LOCK FEATURE
You can select a non-standard solid color at anytime by activating the “color lock” feature. The color lock feature allows you to stop a XG Light show and “lock” on any color shown during an active light show. To “lock” onto a solid color, power cycle the pool light switch off/on thirteen (13) times when the desired color is displayed during the active light show.

RETURN FEATURE
You can return to the last color locked color effect while in a light show mode or fixed solid colors by activating the “return” feature. To return to the last color locked color effect, power cycle fourteen (14) times, and after five seconds the last saved color lock effect will be displayed

MEMORY MODE
When your Color Splash XG light fixtures are turned off for longer than 10 seconds, the light show or solid color on display will be stored. The next time the power is turned on, the fixture will display that saved memory light show or color.

NOTE : Your Color Splash XG light fixtures are “synchronous”, meaning thatmultiple Color Splash XG light Fixtures on the same light will sync together so that they all display the same light show or solid color at the same time. However, all of the XG light fixtures must be on the same electrical circuit for this feature to be operational. Color Splash XG LED light fixtures may not synchronize with any other pool/spa light fixtures. Color Splash XG LED light fixtures will synchronize with the LXG Series replacement lamps. Please consult a qualified electrician to determine your specific pool and spa circuit configuration.

DESCRIPTION OF LIGHT SHOWS AND COLORS

1. PERUVIAN PARADISE (FACTORY DEFAULT LIGHT SHOW):

2. Show : Rapid cross-fades between white, magenta, blue and green.

3. Cycle : 16 second color sequence cycle through with rapid cross-fade between colors. Fixture will stay on each solid color for 4 seconds before moving to the next.

4. SUPER NOVA
   

5. Show : Rapid and random flashes through all five solid colors.

6. Cycle : 1/2 second color sequence cycle with fast change between colors

7. NORTHERN LIGHTS
   

8. Show : Slow cross-fade through all five solid colors.

9. Cycle : Two minute color sequence cycle with slow cross-fade between colors.
   Fixture will hold on each solid color for 8 seconds before moving to the next.

10. TIDAL WAVE

11. Show : Slow cross-fade between green and blue.

12. Cycle : 24 second color sequence cycle with slow cross-fade between solid colors

13. PATRIOT DREAM

14. Show : Cross-fade through red, white and blue only.

15. Cycle : 11 second color sequence cycle with quick cross-fade between colors.
    Fixture will stay on each solid color for 3 seconds before moving to the next

16. DESERT SKIES
    

17. Show : Cross-fade through orange, red and magenta.

18. Cycle : 24 second color sequence cycle with cross-fade between colors.

19. NOVA
    

20. Show : Cross-fade transition through all five solid colors.

21. Cycle : 2 second color sequence cycle with fast change between colors.

22. PARISIAN BLUE : Fixed color

23. NEW ZEALAND GREEN : Fixed color

24. ARCTIC WHITE : Fixed color

25. BRAZILIAN RED : Fixed color

26. MIAMI PINK : Fixed color

27. COLOR LOCK : Lock and save the current color effect during a color show.

28. RETURN : Return to the last saved color effect.

TROUBLESHOOTING

reset the GFCI if necessary
Light fixture does not function properly| Check the fixture wiring connection to the junction box at the pool side and the AC power switch. Be sure that there is proper AC power applied to the fixture.

COLOR SPLASH XG SERIES LED ENHANCED FUNCTIONALITY WITH CERTAIN PENTAIR® AND JANDY® AUTOMATION SYSTEMS. Certain Pentair® and Jandy® automation systems have a mode setting for controlling “Pentair IntelliBrite® 5g LED Color” light fixtures. This setting can also be used to operate Color Splash XG Series LED light fixtures. When the Pentair and Jandy automation system is set to “IntelliBrite” mode, users will NOT see XG series proprietary colors and show names displayed on the control screen. (See J&J’s cross reference guide to assist users with selecting XG Series light shows and colors on automation systems set to “IntelliBrite” mode.) Color Splash XG Series LED light fixtures will work with most pool/spa automation systems.

NOTE : If the automation system does not have a mode setting for Pentair IntelliBrite LED; XG series will need to be controlled via the traditional on/off sequence to advance colors and light shows. Please refer to the Pentair or Jandy automation manufacturer’s product user guide to determine if the system has a mode setting for Pentair IntelliBrite 5g LED Color and for information on how to set it up. J&J Electronics does not provide service or informational support for Pentair or Jandy automation products.

NOTE : J&J’s Color Splash XG Series LED Pool and Spa light fixtures will not synchronize with any other manufacturer’s pool or spa light fixtures.

Warning!
Color Splash XG Series LED lighting is NOT compatible with the Pentair IntelliBrite Controller (Part Number: 600054). Installation of J&J’s XG series LED light fixture with an IntelliBrite controller will permanently damage the J&J light fixture and VOID J&J’s warranty

COLOR SPLASH XG SERIES LED POOL AND SPA LIGHT FIXTURES WHEN USED WITH ADVANCED AUTOMATION SYSTEM
When Color Splash XG Series LED light fixtures are integrated with certain Pentair® or Jandy® automation systems, selecting shows and colors will be done through the automation controls and not through power cycling off/on.

NOTE : When using Pentair or Jandy automation, the system needs to be set to operate IntelliBrite® 5g LED. When in “IntelliBrite” mode, J&J’s proprietary color and show names will not be displayed, but the cross reference guide below will assist users in selecting their desired color or show. For information on how to program a Pentair or Jandy automation system to operate IntelliBrite 5g Color LED Pool or Spa Lights, please refer to the manufacturers product user guide.

XG SERIES LIGHT SHOW AND COLOR COMPARISON CHART TO PENTAIR® INTELLIBRITE®

5G COLOR LED POOL/SPA LIGHT

Pentair® Intellibrite® 5G| Color Splash XG Series| Light Show/Solid Color
---|---|---
1. SAm® Mode| 1. Peruvian Paradise| Cycles through white, magenta, blue and green colors.
2. Party Mode| 2. Super Nova| Rapid color changing building energy and excitement.
3. Romance Mode| 3. Northern Lights| Slow color transitions creating a mesmerizing and calming effect.
4. Caribbean Mode| 4. Tidal Wave| Transitions between a variety of blues and greens.
5. American Mode| 5. Patriot Dream| Patriotic red, white and blue transition.
6. California Sunset Mode| 6. Desert Skies| Dramatic transitions of orange, red and magenta tones.
7. Royal Mode| 7. Nova| Richer, deeper color tones.
8. Blue| 8. Parisian Blue| Fixed color.
9. Green| 9. New Zealand Green| Fixed color.
10. Red| 10. Brazilian Red| Fixed color.
11. White| 11. Arctic White| Fixed color.
12. Magenta| 12. Miami Pink| Fixed color.
13. Hold| 13. Color Lock| Save the current color effect during a color light show.
14. Recall| 14. Return| Activate the last saved color effect.

J&J Electronics, LLC (“J&J”) warrants its LED In-Ground Light Fixtures to be free from defects in material and workmanship, under normal use, conditions and service, from the date of purchase and warrants its products as follows:

Product Line| Structural Housing| LED Module
---|---|---
Pool/Large Fixture| Three (3) Year| Three (3) Year
Spa/Small Fixture| Three (3) Year| Two (2) Year

If during the first twenty-four (24) months (Pool/Large Fixture) and first twelve (12) months (Spa/Small Fixture) of the warranty period, the LED Module fails to operate due to a defect in material or workmanship, J&J will, at its option, repair or replace fixture at no charge. If during months twenty-five (25) through thirty-six (36) (Pool/Large Fixture) and months thirteen (13) through twenty-four (24) (Spa/Small Fixture), the LED Module fails to operate due to a defect in material or workmanship, J&J will grant the purchaser a pro-rated credit for purchase of a J&J LED Light Fixture, as the purchaser’s sole remedy

TERMS AND CONDITIONS
This warranty is available to the original purchaser of the product(s) only. This warranty applies only when products are properly installed in an in- ground pool/spa; any other use voids the warranty. Products must be used in lighting equipment designed and approved for the application and in environmental conditions within the normal specified operating range. This warranty does not apply to any abnormal use of product(s), use in violation of any applicablestandard, code or instructions for use in installations including those contained in the latest National Electrical Code (NEC), the Standards for Safety of Underwriters Laboratory, LLC (UL), Standards for the American National Standards Institute (ANSI).

This warranty will not apply in the event of conditions demonstrating abnormal use or stress, under/over voltage/current conditions, excessive switching cycles or operating hours or outside the recommended operating conditions. This warranty does not apply to color shifts or dimming caused by emissions. LED color shifts and dimming occur normally over time. This warranty does not cover damage occurring during shipment, damage or failure resulting from alteration, accident, acts of God, theft, abuse, negligent installation, improper service, unauthorized repairs, freezing or where adequate care has not been taken to prevent damage to the product(s). Tampering with any internal component of this product(s) will void the warranty. This warranty gives you specific rights. You may have other rights that vary according to the laws of your state.

LIMITATION OF LIABILITY
THE FOREGOING SHALL CONSTITUTE THE EXCLUSIVE REMEDY OF THE PURCHASER AND IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ALL WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OR TRADE. THE LIABILITY OF J&J UNDER THIS WARRANTY SHALL BE LIMITED TO THE REPLACEMENT, REPAIR OR PRO- RATED CREDIT OF THE PRODUCT(S) AS STATED HEREIN. J&J IS NOT RESPONSIBLE FOR SHIPPING OR TRANSPORTATION COSTS RELATED TO OBTAINING WARRANTY SERVICE. IN NO EVENT SHALL J&J BE LIABLE FOR ANY OTHER COSTS OR DAMAGES, INCLUDING LOST PROFITS OR REVENUES, LABOR CHARGES OR FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES. J&J reserves the right to change the warranty, warranty period without prior notice and without incurring obligation. To obtain warranty service, retain the failed Product; retain the installation invoice showing product purchase price and contact J&J Electronics, LLC at 800.735.4553 ext. 242 or warranty@jandjelectronics.com. As of 08/29/2016

an LED lighting company | Irvine, California www.jandjpoolspa.com

© 2016 J&J Electronics, LLC All rights reserved. Color Splash® is a trademark of and manufactured by J&J Electronics, LLC All registered and trademarked brands and names are the property of their respective companies. REV. 082916

References

• Better Lighting | Why Hayward

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>