nostalgia HomeCraft HCMF4BK 4-in-1 Milk Frother Instruction Manual
- June 7, 2024
- Nostalgia
Table of Contents
All products are trademarks of Nostalgia Products LLC.
Worldwide design & utility patented or patents pending.
© 2021 Nostalgia Products LLC.
www.nostalgiaproducts.com
(rev. 02/24/21 DL)
4-in-1 Milk Frother
Instruction Manual
SAFETY
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can cause serious injury to
you and others.
All safety messages will follow the safety alert symbol.
All safety messages will tell you what the potential hazard is, tell you how
to reduce the chance of injury, and tell you what can happen if the
instructions are not followed.
Appliance Specifications:
120 Volts, 60 Hz, 600 Watts
THIS PRODUCT IS FOR USE IN 120V AC OUTLETS ONLY.
Refer to www.nostalgiaproducts.com/user-
manuals/ for the most updated
manual.
IMPORTANT SAFEGUARDS
A person who has not read and understood all operating and safety
instructions is not qualified to operate this appliance. All users of this
appliance must read and understand this Instruction Manual before
operating or cleaning this appliance.
When using electrical appliances, basic safety precautions should
always be followed, including:
-
Read all instructions before operating this appliance.
-
DO NOT TOUCH the hot surfaces. Use handles or knobs.
-
This appliance is NOT A TOY.
-
Keep out of reach of children.
-
Unsupervised young children and cognitively challenged individuals should never operate this appliance.
-
Close supervision is necessary when any appliance is used by or near children.
-
To protect against electrical shock do not immerse the cord, plug, or any part of this unit in water or other liquids.
-
Do not operate this appliance when parts are missing or broken.
-
Unplug from outlet when not in use, before removing parts, and before cleaning.
Allow cooling before putting on or taking off any parts, and before cleaning. -
DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or if the appliance has been damaged in any manner. Return the appliance to the nearest repair shop for examination, repair, or adjustment.
-
The manufacturer does not recommend the use of accessory attachments other than what is provided by the manufacturer. The use of attachments may cause injuries.
-
DO NOT use the appliance for anything other than its intended use.
-
DO NOT use outdoors. FOR HOUSEHOLD USE ONLY.
-
DO NOT place on or near a hot gas or electric burner, or in a heated oven.
-
DO NOT put any parts of this appliance in the dishwasher.
-
DO NOT let cord hang over the edge of table or counter, or touch not surfaces.
-
NEVER leave the unit unattended while in use or when plugged into an outlet.
-
Extreme caution must be used when moving an appliance containing hot food.
-
Always attach the plug to the appliance first, then plug the cord in the wall outlet. To disconnect, turn any control to “off,” then remove the plug from the wall outlet.
ADDITIONAL IMPORTANT SAFEGUARDS
Operating Safety Precautions
- The attached base can not be used for other than intended use.
- Do not operate the appliance without anything in it to avoid damaging the heat elements.
- Do not let the cord hang over the edge of a table or counter or touch a hot surface.
- Do not place on or near a hot gas or electric burner or in a heated oven.
- Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the blender.
- Do not touch the hot surface. Use the handle or the button.
- Extreme caution must be used when moving an appliance containing hot milk
- The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
- The appliance is only used for frothing and heating milk. Do not use the appliance for other than intended use.
- Always operate the appliance with a cover in place.
- Scalding may occur if the lid is removed during the brewing cycles.
Instructions for the Electrical Cord and Plug
-
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug is intended to fit into a polarized outlet only one way.
If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plugin anyway. -
A short power supply cord is provided to reduce the risk resulting from becoming entangled or tripping over a long cord.
-
If a long detachable power-supply cord or extension cord is used:
• Extension cords can be used if care is exercised in their use.
• The marked electrical rating of the cord or extension cord should be at least as great as the electrical rating of the appliance.
• When using a longer cord or extension cord, make sure that
the cord does not drape over a countertop or tabletop where it can be pulled on or tripped over unintentionally. -
The manufacturer does not recommend using this machine in countries that do not support 120V AC even if a voltage adapter, transformer, or converter is in use.
SAVE THESE INSTRUCTIONS!
INTRODUCTION
Congratulations on your purchase of the HomeCraft Milk Frother! Enjoy the rich
taste of barista-styled froth! This milk frother has four functions – Warm &
Thick Foam, Warm & Thin Foam, Warm Milk, and Cold Foam! Perfect for making
cappuccinos, coffee, macchiatos, lattes, hot chocolate & espresso!
Features include:
- Perfect for making cappuccinos, coffee, macchiatos, lattes, hot chocolate, espresso
- Simple warm/cold milk froth in 40 seconds
- Detachable froth paddle for easy cleaning
- 360-degree cordless design
- Double-wall insulated with ergonomic handle
- LED indicator light with automatic shutoff
- Removable transparent lid
PARTS & ASSEMBLY
Your MILK FROTHER requires little assembly. Prior to use, wipe down the
outside of the unit with a damp cloth and dry.
Do not attempt to assemble parts while the unit is running.
Always assemble parts while the unit is unplugged.
HOW TO OPERATE
Before first use, carefully unpack your MILK FROTHER, remove all packaging
materials, and then follow the cleaning instructions under the CLEANING &
MAINTENANCE section.
WARM AND THICK FOAM
-
Place the milk frother upright on a dry, sturdy, and heat-resistant surface near an electrical outlet.
-
Take the lid off and insert the frothing paddle onto the shaft on the bottom of the frother.
-
Fill the jar with the desired amount of milk and put the lid on.
NOTE: Minimum milk capacity for WARM & THICK FOAM is 3 oz. Max capacity is 5 oz.
Refer to the chart to decide how much milk to put in – the type of milk used may vary. -
Connect the plug into an electrical outlet and place frother onto the base.
-
Press the FUNCTION button once and the WARM &
The THICK FOAM indicator light will illuminate. -
Press the ON/OFF button to begin the frothing process.
NOTE: This setting will take approximately 50 to 90 seconds. The frother will turn off automatically when the cycle is finished. If you want to stop the frothing process at any moment, press the ON/OFF button once. -
Take frother off base, remove the lid and pour out warm froth and enjoy.
CAUTION: Minimum 3 minutes rest time must be maintained between cycles otherwise, the frother will stop and will flash, indicating that it needs to cool down.
WARM AND THIN FOAM
-
Place the milk frother upright on a dry, sturdy and heat-resistant surface near an electrical outlet.
-
Take the lid off and insert the frothing paddle onto the shaft on the bottom of the frother.
-
Fill the jar with the desired amount of milk and put the lid on.
-
NOTE : Minimum milk capacity for WARM & THIN FOAM is 3 oz. Max capacity is 5 oz.
Refer to the chart to decide how much milk to put in – the type of milk used may vary. -
Connect the plug into an electrical outlet and place frother onto the base.
-
Press the FUNCTION button twice and the WARM & THIN FOAM indicator light will illuminate.
-
Press the ON/OFF button to begin the frothing process.
NOTE: This setting will take approximately 50 to 90 seconds. The frother will turn off automatically when the cycle is finished. If you want to stop the frothing process at any moment, press the ON/OFF button once. -
Take frother off base, remove the lid and pour out warm froth and enjoy.
CAUTION: Minimum 3 minutes rest time must be maintained between cycles otherwise, the frother will stop and will flash, indicating that it needs to cool down.
WARM MILK
-
Place the milk frother upright on a dry, sturdy, and heat-resistant surface near an electrical outlet.
-
Take the lid off and insert the frothing paddle onto the shaft on the bottom of the frother.
-
Fill the jar with the desired amount of milk and put the lid on.
NOTE: Minimum milk capacity for WARMING MILK is 3 oz. Max capacity is 10 oz.
Refer to the chart to decide how much milk to put in – the type of milk used may vary. -
Connect the plug into an electrical outlet and place frother onto the base.
-
Press the FUNCTION button three times and the WARMING The MILK indicator light will illuminate.
-
Press the ON/OFF button to begin the process.
NOTE: This setting will take approximately 50 – 135 seconds. The frother will turn off automatically when the cycle is finished. If you want to stop the frothing process at any moment, press the ON/OFF button once. -
Take frother off base, remove the lid and pour out warm milk and enjoy.
CAUTION: Minimum 3 minutes rest time must be maintained between cycles otherwise, the frother will stop and will flash, indicating that it needs to cool down.
COLD FROTH
-
Place the milk frother upright on a dry, sturdy, and heat-resistant surface near an electrical outlet.
-
Take the lid off and insert the frothing paddle onto the shaft on the bottom of the frother.
-
Fill the jar with the desired amount of milk and put the lid on.
NOTE: Minimum milk capacity for COLD FROTH is 3 oz. Max capacity is 5 oz. Refer to the chart to decide how much milk to put in – the type of milk used may vary. -
Connect the plug into an electrical outlet and place frother onto the base.
-
Press the FUNCTION button four times and the COLD FROTH indicator light will illuminate.
-
Press the ON/OFF button to begin the process.
NOTE: This setting will take approximately 2 minutes. The frother will turn off automatically when the cycle is finished. If you want to stop the frothing process at any moment, press the ON/OFF button once. -
Take frother off base, remove the lid and pour out the froth and enjoy.
CAUTION: Minimum 3 minutes rest time must be maintained between cycles otherwise, the frother will stop and will flash, indicating that it needs to cool down.
FROTH CHART
NOTE: These are approximate times only. Using different types of milk may vary.
FUNCTION | MIN/MAX CAPACITY | TIME | FROTH PRODUCED |
---|---|---|---|
WARM &THICK FOAM | 3 OZ. MIN | ||
5 OZ. MAX | 50 SECONDS | ||
90 SECONDS | 10 OZ. |
16 OZ.
WARM &THIN FOAM| 3 OZ. MIN
5 OZ. MAX| 50 SECONDS
90 SECONDS| 8 OZ.
14 OZ.
WARMING ONLY| 3 OZ. MIN
10 OZ. MAX| 50 SECONDS
135 SECONDS| 3 OZ.
10 OZ.
COLD FROTH| 3 OZ. MIN
5 OZ. MAX| 2 MINUTES| 7 OZ.
12 OZ.
HELPFUL TIPS
- If adding frothed milk to a hot drink, prepare the beverage while the frother is in use. Serve immediately for the best flavor.
- All kinds of milk can be used with this appliance (Whole, 2%, 1%, skim, soy milk, almond milk, rice milk). Skim milk will produce the thickest, most stable froth. Soy milk will produce froth with somewhat larger bubbles, but the froth is not as stable.
- Do not use anything other than milk in the frother. Other items like flavoring, coffee, or hot chocolate may damage the unit. If you do use any of these products be sure to clean immediately.
CLEANING & MAINTENANCE
- Always disconnect the appliance from the power outlet and allow it to cool down before cleaning.
- CAUTION: Never immerse the jar, power cord in water, or allow moisture to contact with these parts.
- Wash lid with water and mild detergent. The lid is not a dishwasher-safe component. Rinse thoroughly and dry.
- Remove the mixing paddle or frothing paddle, and wash them completely in warm water.
- Wash the inner of the jar with a combination of a mild detergent and water and then wipe clean with a soft damp cloth.
- Wipe the appearance of the jar with a soft damp cloth or cleaner, never use a poisonous cleaner. Any other servicing should be performed by an authorized service representative.
NOTE: Do not use chemical, steel, wooden or abrasive cleaners to clean the outside of the appliance to prevent gloss loss.
RETURNS & WARRANTY
SHOULD YOUR UNIT NOT WORK OR IF DAMAGED WHEN YOU FIRST TAKE IT OUT OF THE BOX,
PLEASE RETURN IT TO THE PLACE OF PURCHASE IMMEDIATELY.
HOMECRAFT MILK FROTHER / HCMF4BK
Should you have any questions, please contact us via email or at the customer
service number listed below between the hours of 8:00 AM and 5:00 PM, Monday
through Friday, Central Standard Time.
Distributed by:
Nostalgia Products LLC
1471 Partnership Dr.
Green Bay, WI 54304-5685
Customer Service
Phone: 920-347-9122
Web: www.nostalgiaproducts.com
Customer Service Inquiry
To submit a Customer Service inquiry, go to
www.nostalgiaproducts.com and fill out the
Customer Service Inquiry form and click the Submit button.
A representative will contact you as soon as possible.
Product Warranty Terms
Nostalgia Products LLC (the “Company”) hereby warrants that for a period of
one (1) year from the date of original purchase, this product will be free of
defects in material and workmanship under normal home use, provided that the
product is operated and maintained in accordance with the operating
instructions. As the sole and exclusive remedy under this warranty, the
Company will at its discretion either repair or replace the product found to
be defective, or issue a refund on the product during the warranty period.
This warranty is only available to the original retail purchaser of the
product from the date of initial retail purchase, and is only valid with the
original sales receipt, as proof of purchase date is required to obtain
warranty benefits. All warranty claims must be brought to the attention of the
Company within the warranty period and no later than 30 days of the failure to
perform. This warranty does not cover normal wear or damage caused by
shipping, mishandling, misuse, accident, alteration, improper replacement
parts, or other than ordinary household use.
You may be required to return the product (with shipping prepaid by you) for
inspection and evaluation. Return shipping costs are not refundable. The
Company is not responsible for returns damaged or lost in transit. Unless
otherwise specifically permitted by the operating instructions, this warranty
applies to indoor household use only. In order to obtain service under this
warranty, please contact the Company at the telephone number listed above or
by filling out the Customer Service Inquiry Form located at
www.nostalgiaproducts.com. Warranty valid
only in USA and Canada.
This warranty is in lieu of all other warranties, expressed or implied,
including warranties of merchantability and fitness for a particular purpose,
which are hereby excluded to the extent permitted by law. In no event shall
the Company be liable for any indirect, incidental, consequential, or special
damages arising out of or in connection with this product or the use thereof.
Some states, provinces or jurisdictions do not permit the exclusion or
limitation of incidental or consequential damages, so the foregoing exclusion
or limitation may not apply to you.
This warranty does not apply to re-manufactured merchandise.
Please read the operating instructions carefully. Failure to comply with the
operating instructions will void this warranty.
For more information, visit us online at
www.nostalgiaproducts.com.
Like us on Facebook at www.facebook.com/NostalgiaElectrics.
Follow our boards on Pinterest at
www.pinterest.com/nostalgiaelctrx.
Tweet along with us on Twitter at
www.twitter.com/NostalgiaElctrx.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>