Nostalgia KAIS2SERIES H-E-B Kool-Aid Electric Ice Shaver Instruction Manual
- June 1, 2024
- Nostalgia
Table of Contents
Nostalgia KAIS2SERIES H-E-B Kool-Aid Electric Ice Shaver
SAFETY
- Your safety and the safety of others is very important.
- We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
- This is the safety alert symbol.
- This symbol alerts you to potential hazards that can cause serious injury to you and others.
- All safety messages will follow the safety alert symbol.
- All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
Appliance Specifications
- 120 Volts, 60 Hz
- 50 Watts
THIS PRODUCT IS FOR USE IN 120V AC OUTLET ONLY.
Refer to www.nostalgiaproducts.com/user-
manuals/ for the most updated
manual.
IMPORTANT SAFEGUARDS
A person who has not read and understood all operating and safety
instructions is not qualified to operate this appliance. All users of this
appliance must read and understand this Instruction Manual before operating or
cleaning this appliance.
When using electrical appliances, basic safety precautions should always be
followed, including:
- Read all instructions before operating this appliance.
- DO NOT TOUCH the hot surfaces. Use handles or knobs.
- This appliance is NOT A TOY.
- Unsupervised young children and cognitively challenged individuals should never operate this appliance.
- Close supervision is necessary when any appliance is used by or near children.
- To protect against electrical shock do not immerse cord, plug or any part of this appliance in water or other liquids.
- Unplug from outlet when not in use, before removing parts and before cleaning. Allow to cool before putting on or taking off any parts, and before cleaning.
- DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or if the appliance has been damaged in any manner. Return the appliance to the nearest repair shop for examination, repair or adjustment.
- The manufacturer does not recommend the use of accessory attachments other than what is provided by the manufacturer. Use of attachments may cause injuries.
- DO NOT use the appliance for other than its intended use.
- DO NOT use outdoors. FOR HOUSEHOLD USE ONLY.
- DO NOT place on or near a hot gas or electric burner, or in a heated oven.
- DO NOT let cord hang over edge of table or counter, or touch hot surfaces.
- NEVER leave unit unattended while in use or when plugged into an outlet.
- Extreme caution must be used when moving an appliance containing hot food.
- Always attach plug to appliance first, then plug cord in the wall outlet. To disconnect, turn any control to “off,” then remove plug from wall outlet.
ADDITIONAL IMPORTANT SAFEGUARDS
Operating Safety Precautions
- Blade is VERY sharp. Use EXTREME CAUTION when handling.
- Avoid contact with moving parts. NEVER put fingers or utensils into feed or discharge areas.
- Keep hands away from blade mechanism. Use handles or knobs.
- Unplug from outlet when not in use, before removing parts and before cleaning.
- Check the ice hopper for presence of foreign objects prior to use.
Instructions for the Electrical Cord and Plug
- This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
- A short power supply cord is provided to reduce the risk resulting from becoming entangled or tripping over a long cord.
- If a long detachable power-supply cord or extension cord is used:
- Extension cords can be used if care is exercised in their use.
- The marked electrical rating of the cord or extension cord should be at least as great as the electrical rating of the appliance.
- When using a longer cord or extension cord, make sure that the cord does not drape over a countertop or tabletop where it can be pulled on or tripped over unintentionally.
The manufacturer does not recommend using this machine in countries that do
not support 120V AC even if a voltage adapter, transformer, or converter is in
use.
SAVE THESE INSTRUCTIONS!
INTRODUCTION
Congratulations on your purchase of the Kool-Aid™ ELECTRIC ICE SHAVER! This fun and easy to use appliance makes a variety of cool, refreshing treats with ease. It quickly creates a soft, fluffy ice that absorbs the flavors of any liquid paired with it, making it perfect for snow cones, slush drinks, margaritas, daiquiris, and more!
PARTS & ASSEMBLY
PARTS
ASSEMBLY
CAUTION : This unit has a sharp stainless steel blade that can cut and
cause injury. Use EXTREME CAUTION when handling the appliance. Keep fingers
clear from blade and avoid contact at all times when using and cleaning.
Before first use, follow the directions under CLEANING & MAINTENANCE to clean the unit.
- Place the Drip Tray into the center of the Base.
- Position the pegs of each Shaved Ice Chamber Wall into the holes located on the Base.
- Then place the Shaver Bowl on top of the Shaved Ice Chamber Walls.
Now you are ready to create cool, refreshing icy drinks!
HOW TO OPERATE
-
Fill a standard ice cube tray or the supplied Ice Mold with water and place in the freezer until frozen. Remove ice from tray(s). See HELPFUL
TIPS section for instructions on using the Ice Mold. -
Place the ELECTRIC SHAVED ICE & SNOW CONE MAKER on a stable, waterproof surface near an electrical outlet before starting.
-
Always make sure that the cord is away from a water source.
-
With Shaver Bowl fitted on top of Shaved Ice Chamber Walls, place frozen ice cubes into the Shaver Bowl. If using ice from Ice Molds, place with flat side down and notched side up. USE CAUTION when placing ice cubes in Shaver Bowl. The blade in the Shaver Bowl is very sharp.
-
Place the Snow Cone Cup or a small bowl under the Shaver Bowl to catch shaved ice.
-
Place the Motor on top of the Shaver Bowl and hold in place. When filled with
ice, the Motor will rest a few inches above the bottom of the Shaver Bowl. -
Plug in the unit. The ELECTRIC SHAVED ICE & SNOW CONE MAKER operates at one speed. While holding the Shaver Bowl steady with one hand, press the Power Button. It will start with a gentle press.
-
Press continuously until majority of ice is shaved, or until the Motor sits flush to the bottom of the Shaver Bowl. To stop shaving ice, release pressure on the Power Button.
-
Some ice may remain in the Shaver Bowl. Discard this ice before adding more ice.
-
Repeat this process until you have the desired amount of shaved ice.
-
After each 1 minute of continuous use, wait 10 minutes before using again to allow Motor to cool.
-
Unplug unit from outlet when finished.
HELPFUL TIPS
USING ICE MOLD
Common ice cubes may be used in the ELECTRIC SHAVED ICE & SNOW CONE MAKER,
but will produce slightly coarser textured ice. For best results, we recommend
using the included Ice Mold.
- Fill the supplied Ice Mold with liquid to approximately ½ inch below the top, just below the Max fill line.
- Place on a flat surface in the freezer until frozen (about 10 – 12 hours).
- If unable to remove ice from Ice Mold, run under water until ice is loose.
- Ice Mold makes approximately 2 cups of shaved ice.
- Ice Mold can also be used as a serving bowl for shaved ice.
USING TRADITIONAL ICE CUBES
- Evenly place 10 medium-sized ice cubes in the Shaver Bowl, which will yield approximately 2 cups of shaved ice.
- Do not overfill Shaver Bowl with ice.
CLEANING & MAINTENANCE
The blades in the Shaver Bowl are very sharp. Use EXTREME CAUTION when handling the appliance during cleaning.
- Make sure the unit is unplugged before cleaning.
- Before first use and continuing after each use, be sure to wipe off the Motor with a damp, non-abrasive cloth and dry thoroughly. NEVER immerse Motor or cord in water or any other liquid.
- Wash the Shaver Bowl, Shaved Ice Chamber Walls, Base, Drip Tray, Snow Cone Cup, and Ice Mold with a soft cloth in warm water mixed with a mild detergent. Dry with a soft cloth or air dry prior to storage.
- To prolong the life of your ELECTRIC SHAVED ICE & SNOW CONE MAKER, hand-washing parts is highly advised. Dishwasher use is not recommended. NEVER place the Motor in a dishwasher.
RECIPES
Your ELECTRIC SHAVED ICE & SNOW CONE MAKER makes perfectly shaved ice that can
be used to make:
-
SNOW CONES
After shaving the ice, add flavored syrup. Add more than one flavor to create colorful and varied snow cones. Create stripes of flavor in the shaved ice for Rainbow Snow Cones. -
SLUSH DRINKS
Fill a glass with freshly shaved ice. Add your favorite soft drink, flavored tea or fruit juice. Mix well. -
FRESH FRUIT SLUSH
Fill a serving cup with freshly shaved ice. Add flavored syrup and top with fresh chopped fruit of your choice. -
ICE CREAM SLUSH
Fill a serving cup with your choice of ice cream. Top with a generous serving of shaved ice. Add flavored syrup. -
YOGURT SNOW
Freeze flavored yogurt in Ice Molds. Use your ELECTRIC SHAVED ICE & SNOW CONE MAKER to shave the yogurt cubes and make a refreshing, healthy treat. Add syrup for even more flavor. -
SNOW SMOOTHIES
Freeze ½ cup of milk in Ice Molds. Use your ELECTRIC SHAVED ICE & SNOW CONE MAKER to shave the ice cubes. Place the shaved cubes and fresh strawberries or your choice of fruit in a blender. Add ¼ cup of sugar forsweetness, then blend until smooth or to desired consistency. -
FROZEN JUICE DRINK
Freeze fruit juice in Ice Molds. Use your ELECTRIC SHAVED ICE & SNOW CONE MAKER to shave the cubes to create a healthy treat.
RETURNS & WARRANTY
SHOULD YOUR UNIT NOT WORK OR IF DAMAGED WHEN YOU FIRST TAKE IT OUT OF THE BOX, PLEASE RETURN IT TO THE PLACE OF PURCHASE IMMEDIATELY.
ELECTRIC ICE SHAVER / KAIS2SERIES
Should you have any questions, please contact us via email or at the customer
service number listed below between the hours of 9:00 AM and 4:00 PM, Monday
through Friday, Central Standard Time.
Distributed by:
- Nostalgia Products LLC
- 1471 Partnership Dr.
- Green Bay, WI 54304-5685
- Customer Service
- Phone : 920-347-9122
- Web : www.nostalgiaproducts.com
Customer Service Inquiry
To submit a Customer Service inquiry, go to
www.nostalgiaproducts.com fill out the
Customer Service Inquiry form and click the Submit button. A representative
will contact you as soon as possible.
Product Warranty Terms
Nostalgia Products LLC (the “Company”) hereby warrants that for a period of
one (1) year from the date of original purchase, this product will be free of
defects in material and workmanship under normal home use, provided that the
product is operated and maintained in accordance with the operating
instructions. As the sole and exclusive remedy under this warranty, the
Company will at its discretion either repair or replace the product found to
be defective, or issue a refund on the product during the warranty period.
This warranty is only available to the original retail purchaser of the
product from the date of initial retail purchase, and is only valid with the
original sales receipt, as proof of purchase date is required to obtain
warranty benefits. All warranty claims must be brought to the attention of the
Company within the warranty period and no later than 30 days of the failure to
perform. This warranty does not cover normal wear or damage caused by
shipping, mishandling, misuse, accident, alteration, improper replacement
parts, or other than ordinary household use. You may be required to return the
product (with shipping prepaid by you) for inspection and evaluation. Return
shipping costs are not refundable. The Company is not responsible for returns
damaged or lost in transit. Unless otherwise specifically permitted by the
operating instructions, this warranty applies to indoor household use only. In
order to obtain service under this warranty, please contact the Company at the
telephone number listed above or by filling out the Customer Service Inquiry
Form located at www.nostalgiaproducts.com. Warranty valid only in USA and
Canada. This warranty is in lieu of all other warranties, expressed or
implied, including warranties of merchantability and fitness for a particular
purpose, which are hereby excluded to the extent permitted by law. In no event
shall the Company be liable for any indirect, incidental, consequential, or
special damages arising out of or in connection with this product or the use
thereof. Some states, provinces or jurisdictions do not permit the exclusion
or limitation of incidental or consequential damages, so the foregoing
exclusion or limitation may not apply to you.
This warranty does not apply to re-manufactured merchandise.
Please read the operating instructions carefully. Failure to comply with the
operating instructions will void this warranty.
For more information, visit us online at www.nostalgiaproducts.com.
- Like us on Facebook at www.facebook.com/NostalgiaElectrics.
- Follow our boards on Pinterest at www.pinterest.com/nostalgiaelctrx.
- Tweet along with us on Twitter at www.twitter.com/NostalgiaElctrx.
2023 Nostalgia Products LLC.
The KOOL-AID and KOOL-AID MAN design trademarks are owned by Kraft Foods and
used under license. © 2023 Kraft Foods.
www.nostalgiaproducts.com (rev. 11/07/23
SN)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>