Z CAM IPMAN S Wireless Video Streaming Device – User Guide

Z CAM IPMAN S Wireless Video Streaming Device – User Guide

Z CAM Monitor (App Store)

Z Camera (Google Play)

What is in the box?

• Z CAM IPMAN S main unit x 1.
• Wi-Fi antenna x 2.

How to power up Z CAM IPMAN S?

• Mount NP-F battery on to the rear socket of the main unit.
• Press and hold the release button next to the socket to unmount the battery.
• For external power supply, connect the DC plug to the power socket (6.2~18V) on the side.

How to switch on Z CAM IPMANS?

• Ensure that power is connected.
• Push power switch upward to ON position to switch on.
• Push power switch downward to OFF position to switch off.

How to feed video signal to the HDMI input of Z CAM IPMAN S?

• Connect HDMI output of camera or other equipment to HDMI IN of the main unit.

How to get video signal from the HDMI output of Z CAM IPMAN S?

• Connect HDMI input of monitor or other equipment to HDMI OUT of the main unit.

How to install WiFi antenna?

• Align the bottom of the antenna and the antenna port on top of the main unit.
• Screw in the antenna clockwise until it is fixed in position.
• Both antennas need to be installed.

How to switch the operating mode of Z CAM IPMAN S?

• Mode selector on the side of the main unit set to Rx, status display will change to RX.
• Mode selector on the side of the main unit set to M, status display will change to TX-P.
• Mode selector on the side of the main unit set to Tx, status display will change to TX.

How to use wireless video monitoring feature?

• Camera HDMI output signal must be 1080p60 or below (1080i is not supported).
• Connect camera HDMI output to HDMI IN of main unit, set to TX mode.
• Set another main unit to RX mode, connect HDMI OUT to monitor input.
• Press and hold the function button in the middle for two second until pairing icon shows up.
• Release the function button and wait for auto pairing.
• Channel number on both units should be the same once pairing is successful.
• Once there is a camera HDMI signal output it will be streamed to the RX connected monitor.
• Repeat above procedure to add RX main unit up to a maximum of four.

How to use mobile devices for video monitoring?

• Download and install “Z CAM Monitor” app on iOS devices. (use Z Camera app on Android devices)
• Camera HDMI output signal must be 1080p60 or below (1080i not supported).
• Connect camera HDMI output to HDMI IN of main unit, set to TX mode.
• Note the SSID on the top left corner of main unit display.
• Open “Z CAM Monitor” app, click the bottom right wireless hotspot icon , enter SSID and tap the arrow sign to connect.
• Once there is a camera HDMI signal output it will be streamed to the “Z CAM Monitor” app.
• Repeat above procedure to add mobile devices up to a maximum of four.

How to connect to a wireless router?

• This feature is not yet supported on Android.）

  • Select M mode on the main unit.
  • Connect iOS device to main unit using USB-C to Lightning cable.
  • Turn on the main unit and iOS device, open the Z CAM Monitor app.
  • Tap the bottom right wireless network icon . Available wireless networks will be shown.
  • Select the wireless network, enter password and and tap the arrow sign to connect.
  • Connected WiFi SSID and IP address will be shown on the main unit display.

Please visit www.z-cam.com for latest product information and user guide.

Disclaimer: All product features and technical specifications stated are subjected to the sole interpretation and explanation of Shenzhen Imagine Vision Technology Limited.

Read More About This Manual & Download PDF:

References

• Professional Cinema Camera & VR Camera Company | Z CAM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>