AUTEL B0172DD22U Maxicom Ultra Lite Scanner Instruction Manual

AUTEL B0172DD22U Maxicom Ultra Lite Scanner

Trademarks

Autel®, MaxiSys®, MaxiCOM®, and MaxiDAS® are trademarks of Autel Intelligent Technology Corp., Ltd., registered in China, the United States and other countries. All other marks are trademarks or registered trademarks of their respective holders.

Copyright Information

No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Autel.

Disclaimer of Warranties and Limitation of Liabilities

All information, specifications and illustrations in this manual are based on the latest information available at the time of printing. Autel reserves the right to make changes at any time without notice. For technical assistance in all other markets, please contact your selling agent.

Safety Information

For your own safety and the safety of others, and to prevent damage to the equipment and vehicles upon which it is used, it is important that the safety instructions presented throughout this manual be read and understood by all persons operating or coming into contact with the equipment.
There are various procedures, techniques, tools, and parts for servicing vehicles, as well as in the skill of the individual doing the work. Because of the vast number of test applications and variations in the products that can be tested with this instrument, we cannot possibly anticipate or provide advice or safety messages to cover every situation.
It is the automotive technician’s responsibility to be knowledgeable of the system being tested. It is essential to use proper service methods and test procedures. It is important to perform tests in an appropriate and acceptable manner that does not endanger your safety, the safety of others in the work area, the equipment being used, or the vehicle being tested. Before using the equipment, always refer to and follow the safety messages and applicable test procedures provided by the manufacturer of the vehicle or equipment being tested. Use the equipment only as described in this manual. Read, understand, and follow all safety messages and instructions in this manual.

Safety Messages

Safety messages are provided to help prevent personal injury and equipment damage. All safety messages are introduced by a signal word indicating the hazard level.

.&, DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or to bystanders.

.&. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or to bystanders.

Safety Instructions

The safety messages herein cover situations Autel is aware of. Autel cannot know, evaluate or advise you as to all of the possible hazards. You must be certain that any condition or service procedure encountered does not jeopardize your personal safety.

DANGER: When an engine is operating, keep the service area WELL VENTILATED or attach a building exhaust removal system to the engine exhaust system. Engines produce carbon monoxide, an odorless, poisonous gas that causes slower reaction time and can lead to serious personal injury or loss of life.

WARNINGS:

• Always perform automotive testing in a safe environment.
• Wear safety eye protection that meets ANSI standards.
• Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
• Operate the vehicle in a well-ventilated work area, for exhaust gases are poisonous.
• Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission) and make sure the parking brake is engaged.
• Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.
• Be extra cautious when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltages when the engine is running.
• Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.
• Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
• Keep the test equipment dry, clean, free from oil, water or grease. Use a mild detergent in a clean cloth to clean the outside of the equipment as necessary.
• Do not drive the vehicle and operate the test equipment at the same time. Any distraction may cause an accident.
• Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures and precautions. Failure to do so may result in personal injury or damage to the test equipment.
• To avoid damaging the test equipment or generating false data, make sure the vehicle battery is fully charged and the connection to the vehicle DLC is clean and secure.
• Do not place the test equipment on the distributor of the vehicle. Strong electromagnetic interference can damage the equipment.

PRODUCT DESCRIPTIONS

The MaxiCOM Ultra Lite provides full functions and online repair information needed when diagnosing vehicles, identifying faults, and researching repairs. It features a powerful octa-core processor and a 12.9-inch TFT-LCD capacitive touch screen for swift diagnostics and optimum viewing. As an intelligent diagnostic and information system, MaxiCOM Ultra Lite not only displays the relevant repairs gathered from experienced industry experts but provides step- by-step guidance to ensure the repair is done correctly and efficiently. The MaxiCOM Ultra Lite has two main components:

• MaxiCOM Tablet – the central processor and monitor for the system
• VCI – the vehicle communication interface

1. 12.9″ TFT-LCD Capacitive Touch Screen
2. Ambient Light Sensor – detects ambient brightness
3. Power LED
4. Front Camera
5. Microphone
6. Docking Station Port
7. Collapsible Stand – extends from the back to allow hands-free viewing of the tablet
8. Speaker
9. Rear Camera
10. Camera Flash
11. Mini USB Port – cannot be used with the USB port simultaneously
12. USB Port
13. USB Port
14. Mini SD Card Slot
15. HDMI (High-Definition Multimedia Interface) Port
16. Headphone Jack
17. DC Power Supply Input Port
18. Lock/Power Button – long press to turn on and off the tablet, or tap power button to lock the screen

MaxiFlash VCI

1. DC Power Supply Input Port
2. Vehicle Data Connector
3. Ethernet Port
4. Vehicle LED – flashes green when the device is communicating with the vehicle.
5. Connection LED – refer to Table 1-1 Connection LED Description for details.
6. Power LED – refer to Table 1-2 Power LED Description for details.
7. USB Port

GETTING STARTED

IMPORTANT: Before operating or maintaining this unit, please read these instructions carefully, paying extra attention to the safety warnings and precautions. Use this unit correctly and with care. Failure to do so may cause damage and/or personal injury and will void the product warranty.

WARNING: The MaxiF/ash VG/ is compatible with Autel main cable V2.0 and USB cable V2 only.

1. Connect the main cable V2.0 to the Vehicle Data Connector on the VCI unit, and tighten the thumb screws.
2. Connect the cable’s 16-pin adapter to the vehicle’s DLC, which is generally located under the vehicle dash.
3. Power up the tablet. Ensure the tablet has a charged battery or is connected to the supplied DC power supply.
4. Select from Bluetooth, Wi-Fi or USB cable V2 to connect the tablet with the VCI device and establish a communication link. Use only the USB cable connection when programming.
5. When the VCI device is properly connected to the vehicle and the tablet, the VCI status button on the bottom toolbar of the screen shows a green badge, indicating the platform is ready to start vehicle diagnosis.

Thank you for purchasing this AUTEL MaxiCOM Ultra Lite. Autel manufactures its tools to the highest standards. If properly maintained and used according to instructions, the Ultra Lite will provide years of trouble-free use.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>