OTTO E27 Ø 28 cm Ceiling Light Instruction Manual

Table of Contents

OTTO E27 Ø 28 cm Ceiling Light-FIG-1

Specifications

Safety Instructions
Before using the ceiling light, please read and follow these safety instructions:

Only use the ceiling light with the specified operating voltage to avoid electrical hazards.
Ensure that the frame is securely installed to prevent the ceiling light from falling.
Do not touch the illumination technology directly when the light is turned on as it may be hot and cause burns.
Keep the ceiling light away from flammable materials to reduce the risk of fire.
Do not attempt to repair or modify the ceiling light yourself. Contact a qualified technician for any repairs or modifications.

Disposal Instructions
When disposing of the ceiling light, follow these instructions:

Do not dispose of the ceiling light in regular household waste. Check local regulations for proper disposal methods.
If possible, recycle the ceiling light components separately to minimize environmental impact.

Intended Use
The ceiling light is designed for indoor use and is intended to provide illumination in residential or commercial spaces.

Assembly
To assemble the ceiling light, follow these steps:

Ensure that the power source is turned off before starting the assembly process.
Attach the frame to the ceiling using the provided screws and anchors.
Connect the wiring according to the instructions provided in the installation manual. If you are unsure, consult a qualified electrician.
Securely attach the illumination technology to the frame, ensuring it is centered and aligned correctly.
Double-check all connections and ensure that the ceiling light is securely fixed to the ceiling.
Turn on the power and test the functionality of the ceiling light.

Can I use the ceiling light outdoors?
No, the ceiling light is designed for indoor use only. Using it outdoors may lead to damage or electrical hazards.
How do I clean the ceiling light?
To clean the ceiling light, turn off the power and gently wipe the frame and illumination technology with a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the surface.
Can I replace the illumination technology?
Yes, in most cases, the illumination technology can be replaced. Refer to the product manual or contact customer support for specific instructions on replacing the illumination technology.

Before commissioning the device, check for any damage.
If this is the case, do not operate the device.
Please note that any technical modification to the device immediately voids the device‘s approval!
Keep the device‘s user manual.
When drilling, protect your eyes with safety goggles!
Wearing gloves is prohibited during drilling!
The glove could get caught in the rotating drill.
When working with 230 V, please strictly observe accident prevention regulations.
Do not short-circuit the connections and circuits.
Installation must only be carried out by qualified personnel.
Do not drop the device. It could be damaged upon impact with a hard surface.
Avoid installation in places with significant temperature differences or high humidity.
Do not leave packaging materials lying around, plastic sheets/bags, Styrofoam parts, etc., could become dangerous toys for children.
The device is not for children, it is not a toy!

By separating materials, recycling and disposing of old equipment in this way, you are making an important contribution to protecting our environment.
Packaging can be disposed of free of charge at the appropriate collection points:
- Paper in the paper bin
- Plastics in the yellow bag
- Glass in the used glass container

According to the European WEEE Directive, electrical and electronic WEEE Directive, electrical and electronic equipment must not be disposed of with household waste. Their components must be recycled or disposed of separately, because toxic and hazardous components can cause lasting damage to health and the environment if disposed of improperly.
As a consumer, you are obliged under the Electrical and Electronic Equipment Act (ElektroG) to return electrical and electronic equipment free of charge at the end of its service life to the manufacturer, the point of sale or to public collection points set up for this purpose. Details are regulated by the respective state law.
The symbol of the wheeled garbage can on the product, the operating instructions and/or the packaging refers to these regulations. regulations.

The product is suitable for indoor use.
The product may only be used for its intended purpose, as specified in this user manual!
Only suitable light sources are to be used!

Turn off the circuit breaker! Verify voltage absence using an appropriate measuring device!
First, remove the plastic lampshade by turning it.
Hold the metal housing in the desired position and mark the drill holes. The housing can now be set aside.
Drill the holes while observing the safety instructions.
The connecting cable must be passed through the designated hole into the interior of the luminaire.
The housing can now be mounted to the ceiling/wall using dowels and appropriate screws.
For connecting the power cable, use the terminal strip provided in the device.
Please connect the product‘s power cable to the power cable by following the rule: L to L, N to N, green-yellow to green-yellow.
Insert a suitable light source into the lamp socket.
Place and secure the plastic lampshade back onto the housing by turning it.

OTTO E27 Ø 28 cm Ceiling Light-FIG-2 OTTO E27 Ø
28 cm Ceiling Light-FIG-3