FEIT BPUCLPUCK_830_BAT_3 Rechargeable LED Motion Puck Light Instruction Manual
- June 7, 2024
- Feit
Table of Contents
Model: BPUCLPUCK/830/BAT/3
IMPORTANT SAFETY INSTRUCTIONS AND INSTALLATION GUIDE
Rechargeable LED Motion Puck Light
READ BEFORE INSTALLATION SAVE THESE INSTRUCTIONS
Questions, problems, missing parts? Before returning to the store, cal Feit
Electric Customer Service 8 a.m. – 5 p.m., PST, Monday – Friday
1-866-326-BULB (2852)
FEIT.COM
We appreciate the trust and confidence you have placed in Feit Electric through the purchase of this Rechargeable LED Motion Puck Light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Feit Electric.
Important Safety Information
Read and understand all Safety and Operating instructions in this manual before using this product Follow all safeguards stated in this manual, in addition to normal safety precautions in working with electrical devices.
- Do not place near any heat source.
- Do not place near any heat source.
- To reduce the risk of electrical shock, do not put in water or other liquid. Do not place or store product where it can fall or be pulled into a tub or sink.
- Do not crush or incinerate.
- Do not insert foreign objects into this product.
- To reduce the risk of fire, keep away from combustible materials while in operation.
- To reduce the risk of injury, close supervision is necessary when this product is used near children.
- Do not attempt to repair, disassemble or modify under any circumstances.
This product uses permanent tape that may cause damage to the mounting surface. Feit Electric is not responsible for any damage to the mounting surface.
WARNING: RISK OF SHOCK. House electric current can cause painful shock or serious injury unless handled properly.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PARTS INCLUDED
NOTE: Hardware not shown to actual size.
Part | Description | Quantity |
---|---|---|
AA | Rechargeable Motion Puck Light | 1 |
BB | Micro USB Charging Cable Mounting Screws | 1 |
2
CC
DD| Double-sided Adhesive| 1
EE| Mounting Bracket| 1
LED Fixture Installation (Tape Method)
-
Positioning the Motion Puck Light
Find the desired location for the Motion Puck Light and clean the area. Remove any dirt, dust, or another residue. -
Attaching the Double-Sided Adhesive
Peel off the protective film from one side of the Double-Sided Adhesive (DD).
Affix the Double Sided Adhesive (DD) to the desired area. Peel off the protective film from the other side of the Double Sided Adhesive (DD).
-
Installing the Motion Puck
Light Raise the Motion Puck Light (AA) up, align, and press the Motion Puck Light (AA) onto the Double Sided Adhesive (DD) and hold for 30 seconds to assure the Motion Puck Light (AA) is held securely.
LED Fixture Installation (Screw Method)
-
Detaching the Mounting Bracket
Remove the Mounting Bracket (EE) from the back of the Motion Puck Light (AA). -
Affixing the Mounting Bracket
Find the desired place for the Motion Puck Light (AA). Screw-in the Mounting Bracket with the Mounting Screws (CC).
-
Installing the Motion Puck
Light Raise the Motion Puck Light (AA) up and align the keyholes to the Mounting Bracket (EE). Twist and lock the Motion Puck Light (AA) into place by holding the Motion Puck Light (AA) and gently rotating it in a clockwise direction.
Operating Instructions
-
Selecting a Function
ON—The puck light will stay on continuously until the battery discharges. OFF—The puck light will stay off, regardless of motion. Automatic (A) — The MR sensor will detect motion to turn on the puck light. After not sensing motion for 15 seconds, the puck light will turn off.
-
Charging the Motion Puck Light
Connect the included Micro-USB Charging Cable (BB) to the charging port on the Motion Puck Light (AA). The Charging indicator light on the Motion Puck Light (AA) will turn red when charging and green when fully charged.
SAVE THESE INSTRUCTIONS
SPECIFICATIONS PRODUCT
USB | 5V |
---|---|
CRI | >80 |
Lumens | 100 I’m |
CCT | 3000K |
Life | 15,000 hrs |
Working Time | 6 hours of continuous light |
Charging Time | 3-4 hrs |
Operating Temperature | During Charge: 50F to 113F / During Discharge: -4F to |
140F
CONFIRM OPERATING TEMPERATURE
NOTE: The charging light will turn red when charging and green when fully charged.
The performance specifications (lumens, watts, life, and CCT) should only be
considered an approximation of expected performances.
LIMITED WARRANTY: This product is warranted to be free from defects in
workmanship and materials for up to 1 year from date of purchase. If the
product fails within the warranty period, replacement or refund is your sole
remedy. Except to the extent prohibited by applicable law, any implied
warranties are limited in duration to the duration of this warranty. Liability
for incidental or consequential damages is hereby expressly excluded. Some
states and provinces do not allow the exclusion of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. This
warranty gives you specific legal rights, and you may also have other rights
which vary from state to state or province to province.
Supplier’s Declaration of Conformity: 47 CFR § 2.1077 Compliance
Information
Responsible Party: Feit Electric Company, 4901 Gregg Road, Pico Rivera,
CA 90660, USA 562-463-2852
Unique Identifier: BPUCLPUCK/830/BAT/3
FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Note: This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: Reorient or relocate the receiving antenna.
Increase The separation between The equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV
technician for help. Any changes or modifications not expressly approved by
the manufacturer could void the user’s authority to operate the equipment.
WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>