AcuRite 75102 Intelli-Time Digital Clock Instruction Manual
- June 7, 2024
- Acurite
Table of Contents
AcuRite 75102 Intelli-Time Digital Clock
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.
Unpacking Instructions
Remove the protective film that is applied to the LCD screen prior to using
this product. Locate the tab and peel off to remove.
Package Contents
- Digital Clock
- Instruction Manual
Features & Benefits
- Intelli-Time® Clock
- AM/PM Indicator
- Low Battery Indicator
- Integrated Hang Holes For easy wall mounting.
- Fold-Out Stand
- Battery Compartment
- Intelli-Time® Battery Compartment
- Button For setup preferences.
- SET Button For setup preferences.
- Button: For setup preferences.
- Battery Compartment Cover (not shown)
SETUP
Install or Replace Batteries
- Remove the battery compartment cover.
- Insert 4 x AA alkaline batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.
- Replace the battery cover.
Install or Replace Batteries: 4 AA alkaline batteries
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS. BATTERY SAFETY:
Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
Intelli-Time® Clock
Intelli-Time clock and calendar are pre-programmed to the correct time and date, and update automatically for Daylight Saving Time. All you need to do is select your time zone during clock setup.
Set the Time & Date
Press and hold the “SET” button, located on the back of the clock, to enter
SET MODE. Once in SET MODE the preference you are currently setting will blink
on the clock.
To adjust the currently selected (flashing) item, press and release the “” or ““ buttons (press and HOLD to fast adjust). To save your adjustments, press and release the “SET” button to adjust the next preference. The preference order is as follows:
TIME ZONE (NST HAT AKT PST MST CST EST AST)
AUTO DAYLIGHT SAVING TIME * (YES, NO)
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DAY
CALENDAR YEAR
Care & Maintenance
Clock Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.
Replace Intelli-Time® Clock Battery
Intelli-Time technology is powered by a pre-installed coincell battery that stores the time and date settings. The battery has a shelf life of several years. Time and date will need to be entered after replacing Intelli- Time battery. To replace the Intelli-Time battery:
- Locate the coin cell battery compartment door inside the battery compartment of the clock. Unscrew and remove the compartment cover.
- Insert 1 x CR2032 coin cell battery into the battery compartment, as shown. Install battery with “+” positive terminal facing OUT.
- Screw in the battery cover.
WARNING:T HIS PRODUCTC ONTAINSA BUTTON-CELLB ATTERYIF. S WALLOWED, IT~ COULD CAUSE SEVERE INJURY OR DEATH IN JUST 2 HOURS. SEEKM EDICALA TTENTIONI MMEDIATELYIF INGESTED.
Specifications
POWER 4 x AA alkaline batteries (not included)
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the
following two conditions:
- This device may NOT cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s).
Customer Support
AcuRite customer support is committed to providing you with best-inclass
service. For assistance, please have the model number of this product
available and contact us in any of the following ways:
877-221-1252
info@chaney-inst.com
24/7 support at www.AcuRite.com
- Installation Videos
- Register your Product
- Instruction Manuals
- Support User Forum
- Replacement Parts
- Submit Feedback & Ideas
Limited One Year Warranty
At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. We recommend that you visit us at www.AcuRite.com for the fastest way to register your product. However, product registration does not eliminate the need to retain your original proof of purchase in order to obtain warranty benefits.
Chaney Instrument Co. warrants that all products it manufactures to be of good
material and workmanship, and to be free of defects when properly installed
and operated for a period of
one year from the date of purchase. Remedy for breach of this warranty is
limited to repair or replacement of the defective item(s). Any product which,
under normal use and service, is
proven to breach the warranty contained herein within ONE YEAR from date of
sale will, upon examination by Chaney, and at its sole option, be repaired or
replaced by Chaney.
Transportation costs and charges for returned goods shall be paid for by the
purchaser. Chaney hereby disclaims all responsibility for such transportation
costs and charges. This warranty will not be breached, and Chaney will give no
credit for products it manufactures which have received normal wear and tear,
been damaged (including by acts of nature), tampered, abused, improperly
installed, damaged in shipping, or repaired or altered by others than
authorized representatives of Chaney. The above-described warranty is
expressly in lieu of all other warranties, express or implied, and all other
warranties are hereby expressly disclaimed, including without limitation the
implied warranty of merchantability and the implied warranty of fitness for a
particular purpose. Chaney expressly disclaims all liability for special,
consequential or incidental damages, whether arising in tort or by contract
from any breach of this warranty. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you. Chaney further disclaims all liability from
personal injury relating to its products to the extent permitted by law. By
acceptance of any of Chaney’s products, the purchaser assumes all liability
for the consequences arising from their use or misuse. No person, firm or
corporation is authorized to assume for Chaney any other liability in
connection with the sale of its products.
Furthermore, no person, firm or corporation is authorized to modify or waive the terms of this paragraph, and the preceding paragraph, unless done in writing and signed by a duly authorized agent of Chaney. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. For in-warranty claims: Chaney Instrument Co. 965 Wells St., Lake Geneva, WI 53147
Center Guide for Screw Holes: 5.5-in Template
Use this template for mounting your clock on the wall.
It’s more
than accurate, it’s AcuRite offers an extensive assortment of precision
instruments, designed to provide you with information you can depend on to
Plan your day with confidence™ www.AcuRite.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>