AcuRite 06008RM 3-in-1 Weather Sensor Instruction Manual
- June 7, 2024
- Acurite
Table of Contents
Environment Systems
Package Contents
3-in-1 Weather Sensor
Model 06008RM
Mounting Bracket & Hardware
(4) #4 x 1” Phillips head screws, (1) #6 x 1/4” Phillips
head screw, (4) anchors
Model 11182-3N1MB
Mounting Sleeve
Model 11181-3N1MS
3-in-1 Sensor Setup
- Press release lever to remove mounting sleeve.
- Remove the battery cover.
- Install 4 AA batteries.
Installation
3-in-1 Weather Sensor
Placement for Maximum Accuracy
Proper sensor placement is critical to the accuracy and performance of this
product.
- For optimal wind measurement, ensure no obstructions are above or around the sensor.
- Locate away from heat and humidity sources.
- The sensor transmits a wireless signal up to 330 ft (100 m). Locate away from objects that may limit wireless communication, like thick walls or metal surfaces.
- Mount at least 5 ft (1.5 m) or higher off the ground. Visit www.AcuRite.com/3in1 for installation videos, care and maintenance tips, and troubleshooting.
Install 3-in-1 Sensor
Top or Side Mount
-
Insert the mounting bracket into the hole at the bottom of the mounting sleeve.
Mounting bracket is designed to screw onto wooden posts or surfaces that are 2”x4” or larger. -
Use the small screw included in the hardware bag to fasten the mounting sleeve to the mounting bracket.
-
Use a bubble level (not included) to ensure a level installation.
-
Fasten the mounting bracket to a post or railing using 2 screws.
Install 3-in-1 Sensor
Pipe Mount
- The sensor can be mounted on a 3/4” steel or PVC pipe (not included; available at hardware stores). Insert the pipe into the hole at the bottom of the mounting sleeve. Note: Mounting base is not used.
- Use a bubble level (not included) to ensure level installation for accurate wind measurement.
- Use one of the screws included in the hardware bag to fasten the mounting sleeve securely to the pipe.
Features
This device complies with part 15 of FCC rules. Operation is subject to the
following two conditions:1- This device may NOT cause harmful interference,
and 2- This device must accept any interference received, including
interference that may cause undesired operation. This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference received, including interference that may cause undesired operation of the device.
Specifications
3-in-1 Weather Sensor
| POWER | 4 x AA alkaline or lithium batteries |
|---|---|
| TEMPERATURE RANGE | -40°F to 158°F; -40°C to 70°C |
| HUMIDITY RANGE | I% to 99% |
| WIND SPEED | 0 to 99 mph; 0 to 159 kph |
| WIRELESS RANGE | 330 ft / 100 m depending on home construction materials |
| OPERATING FREQUENCY | 433 MHz |
Limited One Year Warranty
IMPORTANT: The product must be registered to receive warranty service.
Register online at www.AcuRite.com to receive 1-year
warranty protection.
At AcuRite, we proudly uphold our commitment to quality technology. Chaney
Instrument Co. warrants that all products it manufactures be of good material
and workmanship and to be free of defects when properly installed and operated
for a period of one year from the date of purchase.
We recommend that you visit us at www.AcuRite.com
for the fastest way to register your product. However, product registration
does not eliminate the need to retain your original proof of purchase in order
to obtain warranty benefits.
Chaney Instrument Co. warrants that all products it manufactures be of good
material and workmanship and to be free of defects when properly installed and
operated for a period of one year from the date of purchase. Remedy for breach
of this warranty is limited to repair or replacement of the defective item(s).
Any product which, under normal use and service, is proven to breach the
warranty contained herein within ONE YEAR from the date of sale will, upon
examination by Chaney, and at its sole option, be repaired or replaced by
Chaney. Transportation costs and charges for returned goods shall be paid for
by the purchaser. Chaney hereby disclaims all responsibility for such
transportation costs and charges. This warranty will not be breached, and
Chaney will give no credit for products it manufactures which have received
normal wear and tear, been damaged (including by acts of nature), tampered,
abused, improperly installed, damaged in shipping, or repaired or altered by
others than authorized representatives of Chaney.
The above-described warranty is expressly in lieu of all other warranties,
express or implied, and all other warranties are hereby expressly disclaimed,
including without limitation the implied warranty of merchantability and the
implied warranty of fitness for a particular purpose. Chaney expressly
disclaims all liability for special, consequential or incidental damages,
whether arising in tort or by contract from any breach of this warranty. Some
states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. Chaney
further disclaims all liability from personal injury relating to its products
to the extent permitted by law. By acceptance of any of Chaney’s products, the
purchaser assumes all liability for the consequences arising from their use or
misuse. No person, firm or corporation is authorized to assume for Chaney any
other liability in connection with the sale of its products. Furthermore, no
person, firm, or corporation is authorized to modify or waive the terms of
this paragraph, and the preceding paragraph, unless done in writing and signed
by a duly authorized agent of Chaney. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
For in-warranty claims: Chaney Instrument Co.
965 Wells St., Lake Geneva, WI 53147
**NOTES
_____**
Congratulations!
You’re ready to start using the 3-in-1 Weather Sensor!
need help?
1-844-228-5465
info@chaney-inst.com
Learn More at AcuRite.com
For more information about
AcuRite Environment Systems, to view installation videos, and to purchase
additional compatible AcuRite sensors, visit
www.AcuRite.com
References
- AcuRite Weather Monitoring | #1 Weather Station Brand in North America
- Home
- AcuRite Weather Monitoring | #1 Weather Station Brand in North America
- 3-in-1 Weather Sensor Installation | AcuRite
- AcuRite
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>