IKEA MATÄLSKARE Forced Air Oven Stainless Steel Instruction Manual
- June 3, 2024
- Ikea
Table of Contents
- IKEA MATÄLSKARE Forced Air Oven Stainless Steel
- Safety Information
- PERMITTED USE
- INSTALLATION
- Product Description
- Control panel
- Daily use
- Cooking tables
- Cleaning and maintenance
- Technical data
- Installation
- Environmental concerns
- IKEA GUARANTEE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
IKEA MATÄLSKARE Forced Air Oven Stainless Steel
Safety Information
Before using the appliance, read these safety instructions. Keep them nearby
for future reference.
These instructions and the appliance itself provide important safety warnings,
to be observed at all times. The manufacturer declines any liability for
failure to observe these safety instructions, for inappropriate use of the
appliance or incorrect setting of controls.
SAFETY WARNINGS
- Very young children (0-3 years) should be kept away from the appliance. Young children (3-8 years) should be kept away from the appliance unless continuously supervised.
- Children from 8 years old and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this appliance only if they are supervised or have been given instructions on safe use and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.
- WARNING! The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years old must be kept away unless continuously supervised.
- WARNING! Never leave the appliance unattended during food drying. If the appliance is suitable for probe usage, only use a temperature probe recommended for this oven – risk of fire.
- Keep clothes or other flammable materials away from the appliance, until all the components have cooled down completely – risk of fire. Always be vigilant when cooking foods rich in fat, oil or when adding alcoholic beverages – risk of fire.
- Use oven gloves to remove pans and accessories. At the end of cooking, open the door with caution: allowing hot air or steam to exit gradually before accessing the cavity – risk of burns.
- Do not obstruct hot air vents at the front of the oven – risk of fire. Exercise caution when the oven door is in the open or down position, to avoid hitting the door.
PERMITTED USE
CAUTION: the appliance is not intended to be operated by means of an external switching device, such as a timer, or separate remote controlled system.
This appliance is intended to be used in household and similar applications
such as: staff kitchen areas in shops, offices and other working environments;
farm houses; by clients in hotels, motels, bed & breakfast and other
residential environments.
This appliance is not for professional use. Do not use the appliance outdoors.
No other use is permitted (e.g. heating rooms).
Do not store explosive or flammable substances (e.g. gasoline or aerosol cans)
inside or near the appliance – risk of fire.
INSTALLATION
- The appliance must be handled and installed by two or more persons – risk of injury. Use protective gloves to unpack and install – risk of cuts.
- Installation, including water supply (if any) and electrical connections, and repairs must be carried out by a qualified technician. Do not repair or replace any part of the appliance unless specifically stated in the user manual. Keep children away from the installation site. After unpacking the appliance, make sure that it has not been damaged during transport. In the event of problems, contact the dealer or your nearest After-sales Service.
- Once installed, packaging waste (plastic, styrofoam parts etc.) must be stored out of reach of children – risk of suffocation. The appliance must be disconnected from the power supply before any installation operation – risk of electrical shock. During installation, make sure the appliance does not damage the power cable – risk of fire or electrical shock. Only activate the appliance when the installation has been completed.
- Carry out all cabinet cutting works before fitting the appliance in the furniture and remove all wood chips and sawdust. Do not obstruct the minimum gap between the worktop and the upper edge of the oven – risk of burn.
- Do not remove the oven from its polystyrene foam base until the time of installation.
- After installation, the bottom of the appliance must no longer be accessible – risk of burn.
- Do not install the appliance behind a decorative door – risk of fire.
ELECTRICAL WARNINGS
- The rating plate is on the front edge of the oven (visible when the door is open).
- It must be possible to disconnect the appliance from the power supply by unplugging it if plug is accessible, or by a multi-pole switch installed upstream of the socket and the appliance must be earthed, in conformity with national electrical safety standards.
- Do not use extension leads, multiple sockets or adapters. The electrical components must not be accessible to the user after installation.
- Do not use the appliance when you are wet or barefoot.
- Do not operate this appliance if it has a damaged power cable or plug, if it is not working properly, or if it has been damaged or dropped.
- If the supply cord is damaged, it must be replaced with an identical one by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard – risk of electrical shock.
- In case of replacement of power cable, contact an authorized service center.
Product Description
- Control panel
- Cooling fan (not visible)
- Grill element
- Oven lamp
- Oven fan
- Lower heating element (hidden)
- Oven door
Accessories
Inserting the wire shelf and other accessories
Insert the wire shelf onto the level you require by holding it tilted slightly
upwards and resting the raised rear side (pointing upwards) down first. Next,
slide it horizontally along the shelf guide as far as possible.
The other accessories, such as the baking tray, are inserted horizontally by
sliding them along the shelf guides.
If you want to buy an accessory, call the Authorized Service Centre.
Control panel
A Selection knob
B Time knob
C Thermostat knob
D Led thermostat/preheating
First use
Remove the accessories from the oven and heat it at 200° for about an hour
to eliminate the smell and fumes from the insulating materials and protective
grease.
Daily use
-
Select a function
To select a function, turn the selection knob to the symbol for the function you require. -
Turn on/off the oven
To switch on the oven turn the A Knob to the desired function, to switch off turn the A knob to position “0”. -
Preheating
Once the function has been activated, the LED thermostat will switch on signalling that the preheating process has begun.
At the end of this process, the LED thermostat switches off indicating that the oven has reached the set temperature: At this point, place the food inside and proceed with cooking. -
Setting the timer
This option does not interrupt or activate cooking but allows you to use the minute minder both while a function is active and when the oven is off.
To activate the timer, turn the timer knob right round in an clockwise direction and then turn it back in the opposite direction to the desired duration: an acoustic signal will warn you when the count-down is finished.
Oven functions table
The oven has 5 cooking levels. Count up from the lower level.
Cooking tables
Note: cooking temperatures and times are for guidance only.
- Turn food halfway through cooking
- Turn food two-thirds of the way through cooking (if necessary).
- Estimated length of time: dishes can be removed from the oven at different times depending on personal preference.
Cleaning and maintenance
CLEANING
WARNING!
- Never use steam cleaning equipment.
- Only clean the oven when it is cool to the touch.
- Disconnect the appliance from the power supply.
Oven exterior
-
IMPORTANT: do not use corrosive or abrasive detergents. If any of these products accidentally comes into contact with the appliance, clean immediately with a damp cloth.
-
Clean the surfaces with a damp cloth. If it is very dirty, add a few drops of washing up detergent to the water. Finish off with a dry cloth.
Oven interior -
IMPORTANT: do not use abrasive sponges or metallic scrapers or scourers. Over time, these can ruin enamelled surfaces and the oven door glass.
-
After every use, allow the oven to cool then clean it preferably while it is still warm in order to remove built-up dirt and stains caused by food residues (e.g. food with a high sugar content).
-
Use proper oven detergents and follow the manufacturer’s instructions to the letter.
-
Clean the door glass with a suitable liquid detergent. The oven door can be removed to facilitate cleaning (see MAINTENANCE). Inner glass is smooth to facilitate cleaning.
NOTE : during prolonged cooking of foods with a high water content (e.g. pizza, vegetables, etc.) condensation may form on the inside of the door and around the seal. When the oven is cold, dry the inside of the door with a cloth or sponge.
Accessories
- Soak the accessories in water with washing up detergent immediately after use, handling them with oven gloves if still hot.
- Food residues can be easily removed using a brush or sponge.
MAINTENANCE WARNING!
- Use safety gloves.
- Ensure the oven is cold before carrying out the following operations.
- Disconnect the oven from the power supply.
To remove the shelf guides
firmly grip the external part of the guide, and pull it towards you to extract
the support and the two internal pins from the lodging.
To reposition the shelf guides
position them near the cavity and initially insert the two pins into their
lodgings. Next, position the external part near its lodging, insert the
support, and firmly press towards the wall of the cavity to make sure the
shelf guide is properly secured.
To remove the door
- Open the door fully.
- Lift the catches and push them forwards as far as they will go (Fig. 1).
- Close the door as far as it will go (A), lift it up (B) and turn it (C) until it is released (D) (Fig. 2, 3, 4).
To refit the door
- Insert the hinges in their seats.
- Open the door fully.
- Lower the two catches.
- Close the door
Cleaning the glass
- After removing the door and resting it on a soft surface with the handle downwards, simultaneously press the two retaining clips and remove the upper edge of the door by pulling it towards you.
- Lift and firmly hold the inner glass with both hands, remove it and place it on a soft surface before cleaning it. Do the same operation for the intermediate glass.
- To reposition both the intermediate and the internal glass properly, be sure that the “R” can be seen in the left corner. First insert the long side of the glass indicated by “R” into the support seats, then lower it into position.
- Refit the upper edge: A click will indicate correct positioning. Make sure the seal is secure before refitting the door.
To replace the lamp
- Disconnect the oven from the power supply.
- Unscrew the lamp cover (Fig. 5), replace the lamp (see note for lamp type) and screw the lamp cover back on.
- Reconnect the oven to the power supply.
NOTE:
-
Only use 25W/230 V type G9, T300°C halogen lamps.
-
The lamp used in the appliance is specifically designed for electrical appliances and it is not suitable for household room illumination (Commission Regulation (EC) No
244/2009). -
Lamps are available from IKEA Authorized Service Centre.
What to do if …
Problem | Possible cause | Solution |
---|---|---|
The oven does not work. | No presence of mains electrical power. | Verify the |
presence of mains electrical power.
The oven is not connected to the electrical supply.| Connect the oven to the
power supply.
The oven selector is turned to “ ”.| Turn the oven selector and
select a cooking function.
Before calling the Authorized Service Centre:
- See if you can solve the problem yourself with the help of the suggestions given in the “What to do if …” table.
- Switch the appliance off and back on again it to see if the fault persists.
If after the above checks the fault still occurs, contact IKEA Authorized Service Centre.
Always specify:
- a brief description of the fault;
- the type and exact model of the oven;
- the service number (number after the word Service on the rating plate), located on the right hand edge of the oven cavity (visible when the oven door is open);
- your full address;
- your telephone number.
If any repairs are required, please contact IKEA Authorized Service Centre (to guarantee that original spare parts will be used and repairs carried out correctly).
Technical data
Type of product: Built-in Electrical Oven
Model identification:
MATÄLSKARE 805.082.50
Number of cavities| 1
Heat source| Electrical
Number of functions| 6
Usable volume. Measured with any side grids and catalytic panels removed l| 71
Area of the largest baking sheet cm2| 1191
Top heating element W| 2500
Bottom heating element W| 1150
Grill heating element W| 2500
Fan heating element W| 1800
Cooling fan W| 15
Oven lamp W| 25
Oven Fan Wattage W| 22
Total rating W| 2750
Dimensions
Width mm| 595
Height mm| 595
Depth mm| 550
Mass of the appliance MATÄLSKARE stainless steel Kg| ****
27
The technical informations are situated in the rating plate inside the appliance.
Installation
Door lock device
To open the door with the door lock device see Fig 1.
The door safety device can be removed by following the sequence of images (see Fig. 2).
Electrical connection
Make sure the power voltage specified on the appliance rating plate is the same as the mains voltage. The rating plate is on the front edge of the oven (visible when the door is open).
Make sure the power voltage specified on the appliance rating plate is the same as the mains voltage. The rating plate is on the front edge of the oven (visible when the door is open).
Environmental concerns
- WARNING! Ensure that the appliance is switched off and disconnected from the power supply before performing any maintenance operation – risk of electrical shock. Never use steam cleaning equipment.
- Do not use harsh abrasive cleaners or metal scrapers to clean the door glass since they can scratch the surface, which may result in shattering of the glass.
- Ensure the appliance is cooled down before any cleaning or maintenance. – risk of burn.
- WARNING! Switch off the appliance before replacing the lamp – risk of electrical shock.
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100% recyclable and is marked with the recycle
symbol. The various parts of the packaging must therefore be disposed of
responsibility and in full compliance with local authority regulations
governing waste disposal.
SCRAPPING OF HOUSEHOLD APPLIANCES
This appliance is manufactured with recyclable or reusable materials. Dispose
of it in accordance with local waste disposal regulations. For further
information on the treatment, recovery and recycling of household electrical
appliances, contact your local authority, the collection service for household
waste or the store where you purchased the appliance. This appliance is marked
in compliance with European Directive 2012/19/EU, Waste Electrical and
Electronic Equipment (WEEE). By ensuring this product is disposed of
correctly, you will help prevent negative consequences for the environment and
human health.
The symbol on the product or on the accompanying documentation indicates that it should not be treated as domestic waste but must be taken to an appropriate collection center for the recycling of electrical and electronic equipment.
ENERGY SAVING TIPSs
Only preheat the oven if specified in the cooking table or your recipe. Use
dark lacquered or enamelled baking trays as they absorb heat better. Food
requiring prolonged cooking will continue to cook even once the oven is
switched off.
IKEA GUARANTEE
How long is the IKEA guarantee valid?
This guarantee is valid for five (5) years from the original date of purchase
of your appliance at IKEA. The original sales receipt, is required as proof of
purchase. If service work is carried out under guarantee, this will not extend
the guarantee period for the appliance.
Who will execute the service?
IKEA service provider will provide the service through its own service
operations or authorized service partner network.
What does this guarantee cover?
The guarantee covers faults of the appliance, which have been caused by faulty
construction or material faults from the date of purchase from IKEA. This
guarantee applies to domestic use only. The exceptions are specified under the
headline “What is not covered under this guarantee?” Within the guarantee
period, the costs to remedy the fault e.g. repairs, parts, labour and travel
will be covered, provided that the appliance is accessible for repair without
special expenditure. On these conditions
the respective local regulations are applicable. Replaced parts become the
property of IKEA.
What will IKEA do to correct the problem?
IKEA appointed Service Provider will examine the product and decide, at its
sole discretion, if it is covered under this guarantee. If considered covered,
IKEA Service Provider or its authorized service partner through its own
service operations, will then, at its sole discretion, either repair the
defective product or replace it with the same or a comparable product.
What is not covered under this guarantee?
- Normal wear and tear.
- Deliberate or negligent damage, damage caused by failure to observe operating instructions, incorrect installation or by connection to the wrong voltage, damage caused by chemical or electrochemical reaction, rust, corrosion or water damage including but not limited to damage caused by excessive lime in the water supply, damage caused by abnormal environmental conditions.
- Consumable parts including batteries and lamps.
- Non-functional and decorative parts which do not affect normal use of the appliance, including any scratches and possible color differences.
- Accidental damage caused by foreign objects or substances and cleaning or unblocking of filters, drainage systems or soap drawers.
- Damage to the following parts: ceramic glass, accessories, crockery and cutlery baskets, feed and drainage pipes, seals, lamps and lamp covers, screens, knobs, casings and parts of casings. Unless such damages can be proved to have been caused by production faults.
- Cases where no fault could be found during a technician’s visit.
- Repairs not carried out by our appointed service providers and/or an authorized service contractual partner or where non-original parts have been used.
- Repairs caused by installation which is faulty or not according to specification.
- The use of the appliance in a non-domestic environment i.e. professional use.
- Transportation damages. If a customer transports the product to his home or another address, IKEA is not liable for any damage that may occur during transport. However, if IKEA delivers the product to the customer’s delivery address, then damage to the product that occurs during this delivery will be covered by IKEA.
- Cost for carrying out the initial installation of the IKEA appliance.
- However, if an IKEA appointed Service Provider or its authorized service partner repairs or replaces the appliance under the terms of this guarantee, the appointed Service Provider or its authorized service partner will reinstall the repaired appliance or install the replacement, if necessary.
- All plumping and electrical installation, are not the responsibility of IKEA, and customer must complete these work before the execution work.
How country law applies
The IKEA guarantee gives you specific legal rights, which cover or exceed all
the local legal demands. However these conditions do not limit in any way
consumer rights described in the local legislation.
Area of validity
This warranty is valid only in the country where the product has been
purchased; the services will be provided in the framework of the guarantee
conditions.
An obligation to carry out services in the framework of the guarantee exists
only if the appliance complies and is installed in accordance with:
- the technical specifications of the country in which the guarantee claim is made;
- the Assembly Instructions and User Manual Safety Information.
The dedicated AFTER SALES for IKEA appliances
Please don’t hesitate to contact IKEA appointed Authorized Service Centre to:
- make a service request under this guarantee;
- ask for clarifications on installation of the IKEA appliance in the dedicated IKEA kitchen furniture;
- ask for clarification on functions of IKEA appliances.
To ensure that we provide you with the best assistance, please read carefully the Assembly Instructions and/or the User Manual before contacting us.
How to reach us if you need our service
The IKEA after sales customer service center will assist you on the phone with
basic Troubleshooting for your appliances at the time of service call request.
Please refer to
www.IKEA.com
and select your local store for local store phone numbers and opening times.
Before calling us, assure that You have to hand the IKEA article number (8 digit code) and the Serial Number (8 digit code that can be found on the rating plate) for the appliance of which you need our assistance.
SAVE THE SALES RECEIPT!
It is your proof of purchase and required for the guarantee to apply. The
sales receipt also reports the IKEA name and article number (8 digit code) for
each of the appliances you have purchased.
Do you need extra help?
For any additional questions not related to After Sales of your appliances
please contact your nearest IKEA store call centre. We recommend you read the
appliance documentation carefully before contacting us.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>