AcuRite 00251W Sportsman’s Forecaster Instruction Manual
- June 7, 2024
- Acurite
Table of Contents
Instruction Manual
Sportsman’s Forecaster
models 00251W/00252W/02052
Questions? Contact Customer Support at
877-221-1252 or visit
www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.
Unpacking Instructions
Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel it off to remove it.
Package Contents
- Display unit with Tabletop Stand
- Outdoor sensor
- Instruction Manual
Features & Benefits
OUTDOOR SENSOR
-
Integrated Hanger
For easy placement. -
Wireless Signal Indicator
Flashes when data is being sent to the display unit. -
Battery Compartment
-
Battery Compartment Cover
DISPLAY UNIT
-
Hunting or Fishing Activity Meter
Predicts wildlife activity level. Select hunting, fishing, or auto-cycle between both. -
Pressure History Graph
Tracks and displays the barometric pressure history. -
Barometric Pressure
The arrow icon indicates the direction the pressure is trending. -
Intelli-Time® Clock
Automatically updates for Daylight Saving Time. -
Display Low Battery Indicator
-
Monthly High-Temperature Record
-
Current Outdoor Temperature****
-
Monthly Low-Temperature Record
-
Learning Mode Icon
Disappears after the weather forecast self-calibration is complete. -
12 to 24 Hour Weather Forecast
Self-Calibrating Forecasting pulls data from the outdoor sensor to generate your personal forecast. -
Moon Phase
-
Date
-
Today’s High-Temperature Record
-
Outdoor Sensor Signal Strength
-
Today’s Low-Temperature Record
-
Sensor Low Battery Indicator
-
Hunting/Fishing Mode Button
-
Tabletop Stand
BACK OF DISPLAY UNIT
-
“ + ” Button
For setup preferences -
SET Button
For setup preferences -
Battery Compartment
-
Intelli-Time® Battery Compartment
-
“ — ” Button
For setup preferences
-
RESET Button
Full reset to factory defaults
-
Battery Compartment Cover
SETUP
Install or Replace Batteries
AcuRite recommends high quality alkaline batteries for the best product
performance. Heavy duty or rechargeable batteries are not recommended.
The outdoor sensor requires lithium batteries in low-temperature conditions.
Cold temperatures can cause alkaline batteries to function improperly. Use
lithium batteries in the outdoor sensor for temperatures below -4ºF / -20ºC.
Outdoor Sensor
-
Slide off the battery compartment cover.
-
Insert 2 x AA batteries into the battery compartment, as shown.
Follow the polarity (+/-) diagram in the battery compartment. -
Replace the battery cover.
Display Unit
-
Slide the stand off of the bottom of the display, as shown.
-
Slide off the battery compartment cover.
-
Insert 3 x AA batteries into the battery compartment, as shown.
Follow the polarity (+/-) diagram in the battery compartment. -
Replace the battery cover.
-
Replace the stand.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY
AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior
to battery installation. Remove batteries from equipment which is not to be
used for an extended period of time. Follow the polarity (+/-) diagram in the
battery compartment. Promptly remove dead batteries from the device. Dispose
of used batteries properly. Only batteries of the same or equivalent type as
recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose
of batteries in fire, as batteries may explode or leak. DO NOT mix old and new
batteries or types of batteries (alkaline/standard). DO NOT use rechargeable
batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit
the supply terminals.
Intelli-Time® Clock
Intelli-Time products are pre-programmed with the correct time and date. All
you need to do is select your Time Zone and Daylight Saving Time preferences.
The clock will then automatically update for Daylight Saving Time.
Set the Time, Date & Units
Press and hold the “SET” button to enter SET MODE. Once in SET MODE, the
preference you are currently setting will blink on the display.
To adjust the currently selected (flashing) item, press and release the “ + ”
or “ — ” buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button again to adjust
the next preference. The preference set order is as follows:
TIME ZONE (PST MST CST EST AST HAST AKST)
DST (Daylight Saving Time ON or OFF)
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
UNITS: TEMPERATURE (ºF or ºC)
UNITS: PRESSURE (inHg or hPa)
You will automatically exit SET MODE if no buttons are pressed for 20 seconds.
Enter SET MODE at any time by pressing the “SET” button.
If you live in an area that observes daylight saving time, DST should be set to ON, even if it is not currently Daylight Saving Time.
Placement for Maximum Accuracy
AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the display unit and outdoor sensor are critical to the
accuracy and performance of this product.
Display Unit Placement
Place the display unit in a dry area free of dirt and dust.
Display unit stands upright for tabletop use.
Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions.
Sensor is water-resistant and is designed for general outdoor use, however, to
extend its life place the sensor in an area protected from direct weather
elements.
Hang the sensor using the integrated hang holes or hanger, or by using string
(not included) to hang it from a suitable location, like a well-covered tree
branch. The best location is 4 to 8 feet above the ground with permanent shade
and plenty of fresh air to circulate around the sensor.
Important Placement Guidelines
- To ensure accurate temperature measurement, place units out of direct sunlight and away from any heat sources or vents.
- Display unit and outdoor sensor must be within 165 ft (50 m) of each other.
- To maximize wireless range, place units away from large metallic items, thick walls, metal surfaces, or other objects that may limit wireless communication.
- To prevent wireless interference, place both units at least 3 ft (.9 m) away from electronic devices (TV, computer, microwave, radio, etc.).
Setup is Complete
The sensor will now synchronize with the display unit. It may take a few
minutes for synchronization to complete. Please refer to the troubleshooting
section of this manual if anything appears to be functioning improperly.
OPERATION
Using the Sportsman’s Forecaster
Hunting & Fishing Activity Meter
Don’t miss out on favorable weather and wildlife conditions! AcuRite’s Hunting
& Fishing Activity Meter predicts wildlife activity levels by combining
weather observations with lunar positioning data. View the fishing meter, the
hunting meter, or automatically cycle between both meters.
The Mode button (shown right), located on the front of the display, allows you to select the meter mode:
| Hunting Activity Meter Mode
---|---
| Fishing Activity Meter Mode
| Auto-cycle between hunting & fishing activity meters. Press AND HOLD Mode
button for 3 seconds.
Learning Mode
Self-Calibrating Forecasting uses a unique algorithm to analyze changes in
pressure over a time period (called Learning Mode) to determine your altitude.
After 14 days, the Learning Mode icon disappears from the display screen. At
this point, the self-calibrated pressure is tuned in to your location and the
unit is ready for superior weather prediction.
Weather Forecast
AcuRite’s patented Self-Calibrating Forecasting provides your personal
forecast of weather conditions for the next 12 to 24 hours by collecting data
from the sensor in your backyard. It generates a forecast with pinpoint
accuracy – personalized for your exact location.
View the complete list of icons atwww.AcuRite.com/acurite- icons
Barometric Pressure
Subtle variations in barometric pressure greatly impact the weather. This
weather forecaster displays the current pressure and indicates the direction
the pressure is trending (FALLING, STEADY, or RISING).
Moon Phase
Track the phases of the moon, conveyed through simple lunar phase icons:
High & Low Records
Today’s high and low records are displayed for outdoor temperature. Today’s
records automatically clear at 12:00am midnight every day.
Monthly high and low records are displayed for outdoor temperature. Monthly
records automatically clear at 12:00am midnight on the last day of the month.
To manually clear all LOW recorded values, press and HOLD the “—” button for 2
seconds. Dashes will display to confirm you have cleared the LOW records.
To manually clear all HIGH recorded values, press and HOLD the “+” button for
2 seconds. Dashes will display to confirm you have cleared the HIGH records.
Troubleshooting
| Problem | Possible Solution |
|---|
No outdoor sensor reception
nobars| If the wireless signal indicator shows no bars:
• Relocate the display unit and/or the outdoor sensor.
The units must be within 165 ft (50 m) of each other.
• Make sure both units are placed at least 3 feet (.9 m) away from electronics
that may interfere with the wireless communication (such as TVs, microwaves,
computers, etc).
• Use standard alkaline batteries (or lithium batteries in sensor when
temperature is below -4ºF/-20ºC). Do not use heavy duty or rechargeable
batteries. NOTE: It may take up to 20 minutes for display unit and sensor to
synchronize after batteries are replaced.
Display screen not working| • Check that the batteries are installed
correctly.
Batteries may need to be replaced.
• Reset the display by pressing the RESET button, located in the battery
compartment of the display unit. Date and time will need to be entered after a
reset.
Outdoor temperature is flashing or showing dashes| Flashing of the
outdoor temperature is generally an indication of wireless interference.
1. Bring both the sensor and display unit indoors and remove batteries from
each.
2. Reinstall batteries in the outdoor sensor.
3. Reinstall batteries in the display unit.
4. Let the units sit within a couple feet of each other for about 20 minutes
to gain a strong connection.
Inaccurate forecast| Weather Forecast icon predicts conditions for the
next 12 to 24 hours, not current conditions.
• Has Learning Mode icon disappeared from the display unit? Learning Mode must
complete before forecast and pressure will be accurate.
• Allow unit to run continuously for 33 days. Battery removal or resetting the
display unit will restart Learning Mode. After 14 days, forecast should be
fairly accurate, however Learning Mode calibrates for a total of 33 days.
Inaccurate temperature| • Make sure both the display unit and sensor
are placed
out of direct sunlight and away from any heat sources
or vents (see page 7).
If your AcuRite product does not operate properly after trying the
troubleshooting steps, visitwww.AcuRite.com or
call
877-221-1252 for assistance.
Care & Maintenance
Display Unit Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.
Outdoor Sensor Care
Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.
Intelli-Time technology is powered by a pre-installed coin-cell battery that
stores the time and date settings.
The battery has a shelf life of several years. Time and date will need to be
entered after replacing the Intelli-Time battery.
To replace the Intelli-Time battery:
-
Locate the coin cell battery compartment door in the battery compartment of the display unit.
Unscrew and remove the compartment cover. -
Insert 1 x CR2032 coin cell battery into the battery compartment, as shown.
Install battery with “+” positive terminal facing OUT. -
Screw in the battery cover.
Specifications
| TEMPERATURE RANGE | Outdoor: -40ºF to 158ºF; -40ºC to 70ºC |
|---|---|
| WIRELESS RANGE | 165 ft / 50 m depending on home construction materials |
| OPERATING FREQUENCY | 433 MHz |
| POWER | Display: 3 x AA alkaline batteries |
Sensor: 2 x AA alkaline or lithium batteries
DATA REPORTING| 30 second updates
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
- This device may NOT cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur n a particular installation. If his equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increasetheseparationbetween the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.
Such modifications could void the user’s authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference received, including interference that may cause undesired operation of the device.
Customer Support
AcuRite customer support is committed to providing you with best-in-class
service. For assistance, please have the model number of this product
available and contact us in any of the following ways:
877-221-1252
Visit us at www.AcuRite.com
► Installation Videos
► Instruction Manuals
► Replacement Parts
► Register your Product
► Support User Forum
► Submit Feedback & Ideas
Limited 1-Year Warranty
At AcuRite, we proudly uphold our commitment to quality technology. Chaney
Instrument Co. warrants that all products it manufactures to be of good
material and workmanship and to be free of defects when properly installed and
operated for a period of one year from the date of purchase.
We recommend that you visit us at
www.AcuRite.com for the fastest way to register
your product. However, product registration does not eliminate the need to
retain your
original proof of purchase in order to obtain warranty benefits.
Chaney Instrument Co. warrants that all products it manufactures to be of good
material and workmanship and to be free of defects when properly installed and
operated for a period of one year from the date of purchase. Remedy for breach
of this warranty is limited to repair or replacement of the defective item(s).
Any product which, under normal use and service, is proven to breach the
warranty contained herein within ONE YEAR from the date of sale will, upon
examination by Chaney, and at its sole option, be repaired or replaced by
Chaney.
Transportation costs and charges for returned goods shall be paid for by the
purchaser. Chaney hereby disclaims all responsibility for such transportation
costs and charges. This warranty will not be breached, and Chaney will give no
credit for products it manufactures which have received normal wear and tear,
been damaged (including by acts of nature), tampered, abused, improperly
installed, damaged in shipping, or repaired or altered by others than
authorized representatives of Chaney.
The above-described warranty is expressly in lieu of all other warranties,
express or implied, and all other warranties are hereby expressly disclaimed,
including without limitation the implied warranty of merchantability and the
implied warranty of fitness for a particular purpose. Chaney expressly
disclaims all liability for special, consequential, or incidental damages,
whether arising in tort or by contract from any breach of this warranty. Some
states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. Chaney
further disclaims all liability from personal injury relating to its products
to the extent
permitted by law. By acceptance of any of Chaney’s products, the purchaser
assumes all liability for the consequences arising from their use or misuse.
No person, firm, or corporation is authorized to assume for Chaney any other
liability in connection with the sale of its products. Furthermore, no person,
firm, or corporation is authorized to modify or waive the terms of this
paragraph, and the preceding paragraph, unless done in writing and signed by a
duly authorized agent of Chaney. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
For in-warranty claims: Chaney Instrument Co.
965 Wells St., Lake Geneva, WI 53147
It’s more than accurate, it’s
AcuRite offers an extensive assortment of precision instruments, designed to
provide you with information you can depend on to Plan your day with
confidence™. www.AcuRite.com
- © Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented technology.
Visit www.AcuRite.com/patents for details.
Printed in China
00251W INST 050515
Documents / Resources
|
AcuRite 00251W Sportsman’s
Forecaster
[pdf] Instruction Manual
00251W, 00252W, 02052, Sportsman s Forecaster
---|---
References
- Home
- AcuRite Weather Monitoring | #1 Weather Station Brand in North America
- Icon Definitions and Terminology | AcuRite
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>