AcuRite Thermometer with Probe 00217 / 00888 Instruction Manual
- June 7, 2024
- Acurite
Table of Contents
Instruction Manual
Thermometer with Probe
models 00217 / 00888
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.
Unpacking Instructions
Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel it off to remove it.
Package Contents
- Display with Probe Temperature Sensor
- Instruction Manual
**Features & Benefits
**
DISPLAY
-
IN/OUT Switch Slide to view current display (IN) or probe (OUT) temperature.
-
Current Temperature
-
MIN/MAX Button Press to display high & low records.
-
CLEAR Button
-
LIGHT Button Activates momentary backlight.
-
Probe Temperature Sensor
-
Fold-out Tabletop Stand
-
Battery Compartment
-
°F/°C Switch For selecting temperature units.
-
Integrated Hang Hole For easy wall mounting.
**SETUP
**
Install or Replace Battery
AcuRite recommends high-quality alkaline batteries for the best product
performance. Heavy duty or rechargeable batteries are not recommended.
The slide battery compartment covers off and insert 1 x AAA battery into the
battery compartment, as shown. Follow the polarity (+/-) diagram in the
battery compartment.|
---|---
Replace the battery cover.|
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY
AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device
prior to battery installation. Remove batteries from equipment that is not to
be used for an extended period of time. Follow the polarity (+/-) diagram in
the battery compartment. Promptly remove dead batteries from the device.
Dispose of used batteries properly. Only batteries of the same or equivalent
type as recommended are to be used. DO NOT incinerate used batteries. DO NOT
dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old
and new batteries or types of batteries (alkaline/standard). DO NOT use
rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT
short-circuit the supply terminals.
OPERATION
Placement for Maximum Accuracy
AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the display and temperature probe are critical to the
accuracy and performance of this product.
Display & Probe Placement
Place the display in a dry area free of dirt and dust. Display stands upright
for tabletop use or is wall-mountable. To observe outdoor temperatures, the
wired temperature probe must be placed outside. The probe sensor can be
securely mounted to a surface utilizing the adhesive pad or the integrated
hang hole. Take care not to damage the sensor during mounting.
Important Placement Guidelines
- To ensure accurate temperature measurement, place units out of direct sunlight and away from heat sources or vents.
- The wired temperature probe is not waterproof and is not intended for permanent submersion in liquids. Submersion in liquid for more than 30 seconds may result in the complete failure of the probe.
High & Low Records
High and low values are recorded for display (IN) and probe (OUT) temperature.
High and low records reflect the minimum and maximum temperature recorded
since the unit was powered on, or since the battery was changed (whichever was
most recent).
To view the HIGH-temperature record, press and release the “MIN/MAX” button.
The “MAX” icon appears on the display next to the high records.
To view the LOW-temperature record, press and release the “MIN/MAX” button
twice. The “MIN” icon appears on the display next to the low records.
To manually reset the high or low records, press and release the “CLEAR”
button while viewing the records you wish to clear. Dashes will display to
confirm the records have been cleared.
Specifications
TEMPERATURE RANGE| Display: -4°F to 122°F; -20°C to 50°C
Probe: -40°F to 158°F; -40°C to 70°C
---|---
POWER| 1 x AAA alkaline battery
Troubleshooting
Inaccurate temperature| • Make sure both the display and sensor are placed out
of direct sunlight and away from any heat sources or vents (see page 2).
---|---
Display screen not working| • Check that the battery is installed correctly.
The battery may need to be replaced.
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
- This device may NOT cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
Customer Support
AcuRite customer support is committed to providing you with best-in-class
service. For assistance , please have the model number of this
product available and contact us in any of the following ways:
****877-221-1252
Visit us at www.AcuRite.com
- Installation Videos
- Register your Product
- Instruction Manuals
- Support User Forum
- Replacement Parts
- Submit Feedback & Ideas
IMPORTANT
PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE
PRODUCT REGISTRATION
Register online to receive 1-year warranty protection
www.AcuRite.com
Limited 1 Year Warranty
AcuRite is a wholly-owned subsidiary of Chaney Instrument Company. For
purchases of AcuRite products, AcuRite provides the benefits and services set
forth herein. For purchases of Chaney products, Chaney provides the benefits
and services set forth herein.
We warrant that all products we manufacture under this warranty are of good
material and workmanship and, when properly installed and operated, will be
free of defects for a period of one year from the date of purchase.
Any product which, under normal use and service, is proven to breach the
warranty contained herein within ONE YEAR from the date of sale will, upon
examination by us, and at our sole option, be repaired or replaced by us.
Transportation costs and charges for returned goods shall be paid for by the
purchaser. We hereby disclaim all responsibility for such transportation costs
and charges. This warranty will not be breached, and we will give no credit
for products that have received normal wear and tear not affecting the
functionality of the product, been damaged (including by acts of nature),
tampered, abused, improperly installed, or repaired or altered by others than
our authorized representatives.
Remedy for breach of this warranty is limited to repair or replacement of the
defective item(s). If we determine that repair or replacement is not feasible,
we may, at our option, refund the amount of the original purchase price
THE ABOVE-DESCRIBED WARRANTY IS THE SOLE WARRANTY FOR THE PRODUCTS AND IS
EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. ALL OTHER
WARRANTIES OTHER THAN THE EXPRESS WARRANTY SET FORTH HEREIN ARE HEREBY
EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTY OF
MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE.
We expressly disclaim all liability for special, consequential, or incidental
damages, whether arising in tort or by contract from any breach of this
warranty. Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion may not apply
to you.
We further disclaim liability from personal injury relating to its products to
the extent permitted by law. By acceptance of any of our products, the
purchaser assumes all liability for the consequences arising from their use or
misuse. No person, firm, or corporation is authorized to bind us to any other
obligation or liability in connection with the sale of our products.
Furthermore, no person, firm, or corporation is authorized to modify or waive
the terms of this warranty unless done in writing and signed by a duly
authorized agent of ours.
In no case shall our liability for any claim relating to our products, your
purchase, or your use thereof, exceed the original purchase price paid for the
product.
Applicability of Policy
This Return, Refund, and Warranty Policy apply only to purchases made in the
United States and Canada. For purchases made in a country other than the
United States or Canada, please consult the policies applicable to the country
in which you made your purchase.
Additionally, this Policy applies only to the original purchaser of our
products. We do cannot and do not offer any return, refund, or warranty
services if you buy products used or from resale sites such as eBay or
Craigslist.
Governing Law
This Return, Refund, and Warranty Policy is governed by the laws of the United States and the State of Wisconsin. Any dispute relating to this Policy shall be brought exclusively in the federal or state courts having jurisdiction in Walworth County, Wisconsin; and purchaser consents to jurisdiction within the State of Wisconsin.
It’s more than accurate, it’s
AcuRite offers an extensive assortment of precision instruments, designed to
provide you with information you can depend on to
Plan your day with confidence™.
www.AcuRite.com
Printed in China 00217CA INST 030316
©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented technology. Visit www.AcuRite.com/patents for details.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>