Comfort Glow QF4561R Quartz Fireplace Instruction Manual

QF4561R
Quartz Fireplace Installation Instructions and Homeowner’s Manual

QF4561R Quartz Fireplace

WARNING! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.

Made in China

World Marketing of America, Inc 12256 William Penn Hwy, PO Box 192
Mill Creek, PA 17060
OMFORT GLOW PHONE NUMBER: 800-776-9425 http://www.worldmkting.com
FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS OR LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE
CALIFORNIA RESIDENTS ONLY-WARNING:  his product contains chemicals including di(2-ethylhexyl)phthalate (DEHP), which is known to the State of alifornia to cause cancer and reproductive harm. For more information, go to: www.P65Warnings.ca.gov
ANSI/UL 1278. MOVABLE AND WALL-OR CEILING HUNG ELECTRIC ROOM HEATERS DO NOT DISCARD THIS MANUAL – LEAVE FOR HOME OWNER CUSTOMER: PLEASE RETAIN THIS MANUAL FOR FUTURE USE
PLEASE READ THE INSTALLATION & OPERATIONS INSTRUCTIONS BEFORE USING THIS APPLIANCE
IMPORTANT: Read all instructions and warnings carefully before starting installation.
Failure to follow these instructions may result in a possible electric shock, fire hazard and will void the warranty.

SPECIFICATIONS:

Model: QF4561R
120V/ 60Hz 1500W 2 heat settings
3 Quartz heating elements Adjustable brightness
Adjustable thermostat Over heat protection 12 hours function

SAFETY FEATURES

Overheat Safety Feature
This appliance comes equipped with an overheat protection safety device. Should the appliance begin to overheat for any reason, it will automatically turn all heater functions of the appliance off. The appliance will have to be reset prior to continuing use. To reset the overheat protection safety device, turn all controls off and unplug the appliance. Wait 10 minutes, plug the appliance back in and turn on.
WARNING: It is normal for the power cord to feel warm to the touch; however, a loose fit between the outlet and the plug may cause overheating of the plug. If this occurs, try inserting the plug into a different outlet. Contact a qualified electrician to inspect the original outlet for damage.
INTENDED USE: This product is intended only for indoor household or office use.
It is NOT intended for industrial or commercial use. DO NOT USE OUTDOORS

IMPORTANT INSTRUCTIONS

PLEASE READ AND SAVE THESE IMPORTANT SAFEFTY INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons, including the following:

1. Read all instructions before using this heater.
2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9m) from the heater.
3. Extreme caution is necessary when any heater is used by or near children, pets or invalids and whenever the heater is left operating unattended.
4. If possible always unplug this appliance when not in use.
5. Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
6. Any repairs to this appliance should be carried out by a qualified service person.
7. Under no circumstances should this appliance be modified. Parts having to be removed for servicing must be replaced prior to operating this appliance again.
8. Do not use outdoors.
9. Use your heater only in dry environments. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate the heater where it may fall into a bathtub or other water container. Do not use your heater outdoors. Do not use near sinks, swimming pools or other damp areas such as flooded basements, garages, etc or anyplace where the heater could come in contact with water.
10. Do not use this heater in elevated locations, such as on shelves, raised platforms, etc.
11. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
12. To disconnect heater, first turn controls to off, then remove plug from outlet. Always unplug the heater when not in use.
13. Connect to properly grounded outl

ZONE HEATING SAVES!

The concept of Zone Heating is simple. Use High Efficiency heaters to heat the rooms you use most, during the times you use these areas and turn back the thermostat to your central heating system. To achieve the maximum benefit it is important to understand your heater and where best to locate it.
Please follow these suggestions:

1. Close doors to areas you do not wish to heat.

2. Locate an outlet along an interior wall if possible. Position the heater so that the warm air can blow unobstructed across the room towards the exterior walls.

3. Check your windows and doors for the infiltration of cold air and insulate as needed to avoid heat loss.
   Rapid heat loss will minimize the effectiveness of your heater as it would any conventional type heater.

4. Keep the area around the heater free of obstructions to insure maximum airflow. Keep electrical cords, drapery, furniture, and other combustibles 3 feet (0.9 M) away from the front of the heater and away from the sides.

5. Avoid locating your heater in high traffic areas or in direct sunlight.

6. Avoid locating your heater near your central heating thermostat.

INSTRUCTIONS FOR POWER

WARNING: Before servicing this heater be sure to unplug heater from wall outlet. Do not only turn off heater from the main “ON/OFF” switch, be sure to unplug this heater.
Note: The power cord has a polarized plug (with one blade wider than the other) that will only fit in a polarized outlet one way. If it does not insert easily try reversing the plug. If it still does not fit contact your electrician to replace your outlet. DO NOT defeat the safety purpose of the polarized plug.

ELECTRICAL CONNECTION
A 15 AMP, 120 Volt, 60Hz circuit with a properly grounded outlet is required. Preferably, the heater will be on a dedicated circuit. Other appliances on the same circuit
may cause the circuit breaker to trip or the fuse to blow when the heater is in operation. The unit comes standard with a 6′ cord.

WARNING: Electrical outlet wiring must comply with local building codes and all other applicable regulations to reduce the risk of fire, electrical shock and injury.
WARNING: Do not use this appliance if any part of it has been under water. Immediately call a qualified service technician to inspect the appliance and replace any part of the electrical system if necessary.

PRODUCT DIAGRAM

CONTROL PANEL

1. Digital display: Indicates set room temperature or timer value according to the timer or High and low heating mode display. The power is in standby mode and the display is “OFF”.
2. High indicator light:
3. Power button: Powers the display on and off.
4. Flame button: Adjusts the brightness of the flame.
5. Signal-receiving window: For receiving remote control signal.
6. Down button: For setting temperature or time downward.
7. Up button: For setting temperature or time upward.
8. Low indicator light:
9. Timer button: For setting timer up or down.
10. Heater button: Set up the heater mode and/or turn off the heat.

REMOTE CONTROL

PREPARATION
Place the heater on a firm, level surface andplug into a 120V 60Hz power outlet.
Turn on the power switch in the rear of the uniOnly operate heater in upright position withcaster wheels attached.
Insert 2 AAA batteries into the remote contrbefore using (Batteries Not Included)

Start and select working mode

| Turn the heater on by pressing the ON/OFF button on the control panel or by pressing the Power button on the supplied remote control.
When powering unit off, the heating element will stop working first, the fan will continue working for 3min to allow heat to dissipate from heater.
---|---
| elect a heat setting. Press the HEATER button to toggle between the three heat settings. Press once for High Heat 1500W Press again for low heat 1000W
Press again to turn off heat

Setting room temperature

Adjust the thermostat by pressing the arrows on the control panel or button on remote control.
Set temperature indication varies from 59℉ to 95℉. Once you have chosen the desired temperature, the heater will remain on until the room temperature reaches the temperature on the digital display. The heater will cycle on and off to maintain the desired room temperature.
Setting flame

| Adjust the flame brightness by pressing the flame image on the control panel or button on remote control.
---|---

Setting timer-power- off
Caution! ONLY with power-on can you set timer-power-off function.

| When starting the unit, press the timer button on the control panel.
---|---
| Adjust the time by pressing the arrows on the control panel or up down buttons on remote control. Digital display will change from set temperature to time value for the timer. Press the UP or DOWN button more than once, the value will vary from 0 to 12hr (1 hr interval) in circulation.

Setting timer-power-on
Caution! ONLY with power-off can you set timer-power-on function.

| WIth power turned off, press the timer button on the control panel.
---|---
|  Adjust the time by pressing the arrows on the control panel or remote control.  Digital display indicates time value for the timer. Press the timer
button more than once, the value will vary from 0 to 12hr (1 hr interval) in circulation.

Setting electro lock
Electro lock can avoid incorrect operation from children. Locking can be set in both power-on and poweroff modes.

| Press Temp Up and Temp Down arrows on control panel together for 3 seconds. When you hear a singel beep the control panel and remote will be locked. To Unlock, press and hold Temp Up and Temp Down arrows on control panel together for 3 seconds. When upib hear a single  eep control panel and remote control are unlocked.
---|---

MAINTENANCE

1. Glass Information

• Under no circumstances should this product be operated with missing or broken glass.
• Do not strike or slam the glass.
• Do not use abrasive cleaners to clean the glass. 2. Cleaning
  To clean the unit, first turn off controls on unit and unplug unit from power source.
  To clean the glass door: remove dust with clean dry cloth or to remove finger prints and other marks clean glass with clean damp cloth. Do not use abrasive cleaners or spray liquids on glass door surfaces.
  *Metal and metal painted parts should be cleaned with clean damp cloth only. Do not use abrasive cleaners or spray liquids on this surface. 3. If you do not use the heater for a long time, please take out the remote batteries (to prevent corrosion) as shown below. Store the remote in a safe place.

TROUBLE SHOOTING

If the heater will not operate, please check the following before seeking repair of service:

1. Check if the power cord is plugged into an electrical outlet, if not, plug in.
2. Check if electricity to the outlet is working.
3. Check the power switch is open

STORAGE

Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original packaging to repack the unit.

ELECTRIC HEATER WARRANTY

LIMITED WARRANTY:
A limited warranty is extended to the original purchaser of this heater and warrants against malfunction due
to manufacturing defects for a period of (1) one year from the date of retail purchase. Please read and follow
all details noted below.
CLAIMS HANDLED AS FOLLOWS:

• DO NOT RETURN TO PLACE OF PURCHASE
• Contact our Customer Service Department at 1-800-776-9425. You must have the model number, serial number and date of purchase.
• They will provide you with further instuctions, which may include replacement parts, repair or replacement at our option.
  CALL 1-800-776-9425 FOR SERVICE (9AM- 5PM MON.-FRI.) or EMAIL US AT info@worldmkting.com

DUTIES OF THE OWNER:
This heating appliance must be operated in accordance with the written instructions furnished with this heater. This warranty shall not excuse the owner from properly maintaining this heater in accordance with the written instructions furnished with this heater. A bill of sale, cancelled check or payment record must be kept to verify purchase date and establish warranty period. Original carton should be kept in case of warranty return of unit.
WHAT IS NOT COVERED:

1. Damage caused by misuse or use contrary to the owner’s manual and safety guidelines.
2. Damage caused by a lack of normal maintenance.
3. Repair by an unauthorized person.
4. Damage caused by connection to an improper voltage.
5. Damaged caused by use outdoors.

LIMITATIONS:

This warranty does not imply or assume any responsibility for consequential damages that may result from the use, misuse, or the lack of routine maintenance of this heating appliance. A cleaning fee and the cost of parts may be charged for appliance failures resulting from lack of maintenance. This warranty does not cover claims, which do not involve defective workmanship or materials. FAILURE TO PERFORM GENERAL MAINTENANCE (INCLUDING CLEANING) WILL VOID THIS WARRANTY.
THIS LIMITED WARRANTY IS GIVEN TO THE PURCHASER IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE. THE REMEDY PROVIDED IN THIS WARRANTY IS EXCLUSIVE AND IS GRANTED IN LIEU OF ALL OTHER REMEDIES. IN NO EVENT WILL WORLD MARKETING OF AMERICA BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you.

For your record, staple your sales receipt to this manual and record the following
DATE OF PURCHASE:———–
PLACE OF PURCHASE:————-
SERIAL NUMBER:———————-
MODEL NUMBER:——————–
Printed in China
© 2019 Comfort Home Products, Inc. All rights reserved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>