DIGITECH GH1952 Air Purifier with LED Light User Manual
- June 7, 2024
- Digitech
Table of Contents
Air Purifier with LED Light
User Manual
Model: GH1952
Instruction Manual
WARNINGS & CAUTIONS
- Ensure the power line fits properly into the port before plug-in.
- Improper usage may lead the product to damage.
- DO NOT place the air purifier near sources of heat.
- DO NOT sit on or place anything on top of the purifier
- DO NOT immerse the air purifier in water or liquids.
- DO NOT use the air purifier in wet or humid environments.
- DO NOT let children use the air purifier alone, and keep it away from pets.
- DO NOT place the air purifier in an unstable area.
- DO NOT attempt to repair or disassemble the air purifier.
- When not being used, please turn the air purifier off to avoid accidents caused by long working hours.
- DO NOT insert fingers or objects into the air outlet when it is working.
- Use a soft cloth when do the cleaning of unit.
- Remember to unpack the filter package when in first use.
- Replace the filter every 6-month or less. This time may vary depending on air quality and unit using frequency.
FEATURES:
4 working modes
This device has a built-in fan and motor to provide cool air, with 3 fan
speeds and auto mode with indicator light.
Smart air quality sensor
The inserted sensor detects PM 2.5 intelligently with 3 air quality indicator
lights True HEPA filter for efficient purifying This unit has H13 filter with
nylon pre-filter and active carbon filter for more efficient air purifying.
3 night light modes
Warm light creates a peaceful night atmosphere with adjustable brightness.
Filter replacement reminding Convenient filter replacement indicator light
saves the trouble to monitor the filter lifespan.
ACCESSORIES:
|
---|---
PRODUCT DIAGRAM:
SPECIFICATIONS:
Air Flow: | 100m³Vh (CADR) |
---|---|
Rated Power: | 38W |
Input Voltage: | AC 220V 50Hz |
Dimensions | 208 x 208 x 329mm |
OPERATING INSTRUCTIONS:
Operation Instructions for First Use
- Rotate to access the bottom side of the device. Unscrew the knob anti-clockwise. Open the bottom cop.
- Take out the filter
- Unpack the filter package
- Place back the filter
- Place back the bottom cap, screw back the knob and close the bottom cop.
- Connect the power line and plug in an electrical outlet.
Standard Operation
Press the Power button to turn on the device
- 1st touch: Turns on the unit with AUTO Mode
- 2nd touch: Turn off the unit
Press the Fan button to control fan speed
- 1st touch: Low fan speed
- 2nd touch: Middle fan speed
- 3rd touch: High fan speed
- 4th touch: Auto mode
Press the Light button to control the night light
- 1st touch: Minimum brightness
- 2nd touch: Medium brightness
- 3rd touch: Maximum brightness
- 4th touch: Turn off the night light
Notes:
Under AUTO working mode, indicator light and fan speed change automatically as below:
- GREEN indicator light for GOOD air quality with LOW fan speed
- YELLOW indicator light for MEDIUM air quality with MIDDLE fan speed
- RED indicator light for POOR air quality with HIGH fan speed
CARE & MAINTENANCE:
Cleaning the Unit
- Unplug power firstly, and use a soft cloth to wipe the unit clean.
- Don’t immerse the air purifier in water or liquids
Replacing the Air Filter
When the filter replacement indicator keeps red light, it’s time to replace
the new filter. Remember to turn off the unit and unplug the cable line before
changing the filter.
- After replacement, re-plug in the power then press and hold the Power & Fan buttons together for 3 seconds to reset the filter replacement program and the red indicator light will flash 3 times before turning off.
Distributed by:
Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
www.electusdistribution.com.au
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>