digitech AA-2165 Wireless TWS Earphones User Manual
- June 3, 2024
- Digitech
Table of Contents
digitech AA-2165 Wireless TWS Earphones
Box Contents
Product Diagram
| # | Feature | Description |
|---|
| ****
Play/Pause / Call/Volume Button
| Press to play or pause while playing music Press to accept, reject or
redial last number called
| ****
Microphone/LED Status Indicator
| Microphone located in the right and left earphones for phone calls
Display the power and pairing status
| LED Status Indicator| Displays the power and
pairing status of the earphones
---|---|---
4.| Speaker| Earphone speaker covered
by a dustproof mesh
5.| Speaker| Earphone speaker covered
by a dustproof mesh
| Feature | Description |
|---|
| USB Power Socket (Rear)| Connect to the USB charging cable and suitable
USB power source
2.| Charging Ports| Charges the earphones
| Earphone Case LED Battery Indicator| Displays the current battery status of the
earphone case
Operation
Bluetooth Paring
-
Make sure the earphones are fully charged before use, pull both earphones out of the charging case.
Note: Press and hold the power button for up to 5 seconds to turn the earphones off. -
The LED indicator should be flashing red and blue. Open the settings of your smart phone and ensure Bluetooth® is turned on.
-
Once your Bluetooth® is enabled; Scan for devices and the Bluetooth® name AA-2165 should appear.
Bluetooth® Name: AA-2165 -
Press the AA-2165 on the Bluetooth® device list and your smartphone should show that it is connected.
-
You will hear a voice prompt from the earphones saying “Connected”. The volume can be controlled by your smartphone or earphones. The battery status can also be shown in your Bluetooth settings.
Note: The earphones will automatically turn off after 3 minutes or if they’re too far away from your device.
Bluetooth® Hands-Free
| Function | Button |
|---|
Answer Incoming Call
| Press the play/call button to answer the current incoming
call
Reject Incoming Call
| Press the play/call button two times to reject the current incoming call
Hang Up Call
| Once a call has been received; press the play/call button again to hang up
Google Assistant & Siri®
| Press the play/call for up to 1.5 seconds to activate Google Assistant or Siri® on your smartphone. Your smartphone or tablet requires Google
Assistant or Siri in order to work
Music Playback
| Function | Button |
|---|---|
| Pause | Press the play/call button t to pause the current music track |
Play
| Press the play/pause button again after pausing to resume the current music
track
Next Track| Press the play / call button 2 times to skip to the next music
track
Volume| Press the play / call button 3 times to
turn the volume up or down
Charging
Earphones
Insert the earphones into the earphone charging case to recharge them. The red
LED should now be lit on the earphones to indicate charging.
Note: The LED indicator will turn off once the charging has finished.
Charging Case
- Insert the USB micro B charging cable in a 5VDC mains power adaptor (not included) or a suitable USB charging port such as a computer.
- Insert the micro B USB plug into the USB power socket of the charging case.
- The LED status indicator will flash blue once charging has started.
- Once fully charged; the LED status indicator will turn to a solid blue.
Troubleshooting
| Problem: | Solution: |
|---|
Battery
Won’t Charge Or Power On
| Connect to a suitable USB charging source such as a USB mains power adaptor
or USB charging port and make sure it’s correctly turned on.
Make sure the battery is fully charged up to 2 hours and make sure the LED
status indicator has turned off.
Problem:| Solution:
---|---
No Power / LED Indicator
| Ensure the USB charging cable is connected properly to a USB charging port or USB charging
adaptor.
Check to see if your USB power source is working correctly.
No Audio
| Ensure the volume is correctly turned up on your smartphone.
Ensure the earphones are correctly paired and turned on.
Turn the earphones off and on again, turn off the Bluetooth of your smartphone
or tablet and turn back
on.
Type in the password “0000” if it asks you for one.
Safety
- Do not open the earphones or charging case of this product to prevent the unit from damage.
- Keep the earphones and earphone charging case away from high temperatures as it may damage the device.
- Do not expose the earphones or earphone charging case to water or liquids to prevent the unit from damage.
Specifications
- Bluetooth® Version: 5.3+EDR
- Transmission Range: Up to 10m
- Frequency Response: 20Hz-20KHz
- Sensitivity: 95dB±3dB Mic
- Sensitivity: -42dB±3dB
- Impedance: 32Ω Driver Size: 10mm
- Playback Time: 2-4 Hours
- Talk Time: Up to 4 Hours
- Standby Time: Up to 100 Hours (Single) Up to 60 Hours (Both) Charging
- Time: Up to 1 Hour (Earphones) Up to 2 Hours (Charging Case)
- Battery: 3.7V Li-Ion, 30mA (Each Earphone) 3.7V Li-ion, 300mA (Battery Case)
- Power: 5VDC, 500mA (Micro B USB)
- Power Consumption: 10mA Each (Max)
- Dimensions:
41(H) x 18(W) x 17(D)mm (Each Earphone)
68(L) x 45(W) x 22(D)mm (Case)
Distributed by:
Electus Distribution Pty. Ltd.
46 Eastern Creek Drive, Eastern Creek NSW 2766 Australia
Ph: 1300 738 555
Int’l: +61 2 8832 3200
Fax: 1300 738 500
www.electusdistribution.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>