DIGITECH AA2180 Rechargeable Bluetooth 5.0 Headset Instruction Manual

DIGITECH AA2180 Rechargeable Bluetooth 5.0 Headset

BOX CONTENTS:1 x Bluetooth® 5.0 Headset

• 1 x Charging Cradle
• 1 x Micro USB Charging Cable
• 1 x User Manual

BASIC OPERATION:

for 1-4 seconds to power on (it will automatically try to reconnect to the last connected device when powered on)
Power Off| When powered on, long press for 5 seconds to power off
Enter into Pairing Mode| When powered off, long press 5-8 seconds to enter into pairing mode. Otherwise when in standby mode – unconnected, double press the MFB to enter pairing mode
Play / Pause| Short press (when playing music)
Redial a call| Double press to redial last number
Reconnect| Power on and headset will reconnect to last connected device. Or short press MFB to reconnect in pairing mode.
Voice Dialing| Long press for 1 second
Audio Switch| Long press for 1 second to switch between phone and headset when during a calling
Answer a call| Short press (when call coming)
Hang up a call| Short press (during a call)
Reject a call| Long press 1 second (when call coming)
Volume Up (+)| Volume Up| Short press
Next Song| Long press for 1 second
Volume Down (- )| Volume Down| Short press
Previous Song| Long press for 1 second
| Microphone Mute| In calling, short press “Volume +” and “Volume -” to mute the mic, operate again to cancel the mute.

BLUETOOTH® PAIRING AND CONNECTION:

1. When powered off, long press Multi-Function Button for 5-8 seconds to enter pairing mode with LED Blue & Red flash alternately.
2. Search and connect to “AA2180” in your device Bluetooth® settings, LED change to LED Blue flash once connected, now you can now take calls or play music through the headphone.
3. You can press MFB / volume (+) / volume (-) on the Bluetooth® headset to control the answer/hang up a call and play/pause of the music, next and previous song, volume up and down.

Note:

• Pairing: In off status, long press MFB for 5-8 seconds to enter into pairing mode with LED Blue & Red alternately flash.
• Connection: Search and click to connect “AA2180” on your device’s Bluetooth® list.

CONNECTION WITH TWO DEVICES:

1. Using the instructions above connect the first device via Bluetooth®, and turn off the Bluetooth® function of the first device.
2. Set the Bluetooth® Headset to pairing mode again, in standby mode -unconnected, double press MFB to enter pairing mode with Red & Blue LED flash alternately.
3. Search and click to connect “AA2180” on your second device Bluetooth® lists, LED change to Blue LED slow flash after connected.
4. Turn on Bluetooth® function of first device, click to reconnect “AA2180” on Bluetooth® lists. Headset is connected with two devices now.

Note: Music only can be played from one device under two connections, when you want to play music from another device, you need to pause or close the music of the previous device. The same operation during talking status.

BASIC OPERATION:

CHARGING:

Charge the Bluetooth® Headset once when the Red LED flash. Charging time about 2 hours. Solid Red LED changes to Solid Blue LED when fully charged.

Charge Connections:
Please connect to the Bluetooth® Headset charging port through the Micro USB charging cable, the charger can be used as car charger, travel charger, computer USB, etc.

Use of Charging Cradle:
Place the Bluetooth® Headset on the charging base, then connect the charging base to USB charger through the Micro USB port for charging.

Note:

1.  Please charge the Bluetooth® Headset at least one time every 3 months when not in use.
2. Charging when Headset it is powered on, will reset it automatically and power off.

ON CALL FUNCTIONS:

Calling function operation

•  Short press the MFB to answer the new call and hang up the current call;
• Double press the MFB to answer the new call and keep the current call;
• Long press the MFB for 1 second to reject a new call while in current call.
• When you are on a three-party call, double press the MFB to switch audio between the current call and the keep call.

1. How to reconnect and operation when failed to reconnect ?
   When Bluetooth® Headset is connected with your device successfully for the first time, it will search and reconnect the paired device automatically when power on, If failed, please pair and connect again.

2. How to delete paired records?
   When powered on, long press the volume + and the volume – button for 5 seconds to clear the pairing record. The indicator Blue and Red LED flash once at the same time that means the pairing record has been cleared, and the Bluetooth® Headset will not connect back to the connected device. When there are various connection problems, try clearing the pairing record.

3. What’s the password for pairing?
   Some connection devices require password for pairing, please try the following: 0000 or 8888 or 1111 or 1234.

4. What devices could charge for the headphone?
   Any car charger, power bank, PC etc which meet DC 5V, charging current more than 500mA could be charge for this item.

5. How to reset the headset?
   Press MFB and plug the charge cable when powered on, it will reset the headset and power off.

Distributed by:
Electus Distribution Pty. Ltd. 320 Victoria Rd, Rydalmere NSW 2116 Australia www.electusdistribution.com.a Made in China

References

• Electus Distribution - Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>