Kanlux LARATA EL-10 Wall and Ceiling Fixture Instruction Manual

Kanlux LARATA EL-10 Wall and Ceiling Fixture

Product Information

Product Usage Instructions

To use the LARATA EL-10, please follow the instructions below:

1. Ensure that the power supply is within the voltage range of 220-240V~ and a frequency of 50Hz.
2. Select an appropriate location for the product.
3. Connect the wires to the socket using a wire size of 3 x 1-2.5 mm2.
4. Insert the LED G45 LED bulb into the E27 socket.
5. Ensure that the product is installed in an environment with an IP rating of at least IP20.
6. Turn on the power supply.

For further information and support, please visit the Kanlux website or contact Kanlux SA.

INTENDED USE / APPLICATION
Product designed to be used in the home and for other similar general applications.

MOUNTING

The product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock. Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network that meets energy quality standards as prescribed by law. Do not touch the lamp with bare hands. The product must be mounted out of reach.

FUNCTIONAL CHARACTERISTICS

Product for indoor use. Energy-efficient light sources can be used in this product.

USAGE GUIDELINES/MAINTENANCE

Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry clothes. Do not use chemical detergents. Do not cover the product. The product may heat up to a higher temperature. Adjustment of lighting direction and/or replacement of the light source must be done when the product has cooled down. Product must not be used in unfavorable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc.

EXPLANATIONS OF SYMBOLS USED

• P1: Rated voltage, frequency.
• P2: Maximum power of the light source.
• P3: LED lamp.
• P4: Base / holder.
• P5: The product meets the requirements of EU directives.
• P6: Protection against solid foreign objects bigger than 12mm provided.
• P7: Class I. A product in which protection against electric shock is provided not only by means of basic insulation but also through additional safety measures, i.e. extra protective circuit to which a protective conductor of the fixed feeding installation needs to be connected.
• P8: Use only indoors.
• P9: The symbol describes the minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.
• P10: Certificate of Conformity confirming the quality of production in accordance with approved standards on the territory of the Customs Union.
• P11: The product is compliant with all relevant United Kingdom regulations.
• P12: The product meets the requirements of technical regulations applicable in Ukraine.

Installation Instruction

ENVIRONMENTAL PROTECTION

Keep your environment clean. Segregation of post-packaging waste is recommended. P13: This labeling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labeled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralizing. Information on collection centers is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when a new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.

COMMENTS/GUIDELINES

Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury, and other material and non-material damage. For more information about Kanlux products visit www.kanlux.com. Kanlux SA shall not be responsible for any damage resulting from the failure to follow these instructions. Kanlux SA reserves the right to make changes in the manual – the current version can be downloaded at www.kanlux.com.

www.kanlux.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>