SEALEY PFC301 3tonne Fixed Frame Crane Instructions
- June 4, 2024
- SEALEY
Table of Contents
SEALEY PFC301 3tonne Fixed Frame Crane Instructions
MODEL NO: PFC301
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
2. INTRODUCTION
Professional 3tonne fi xed crane with parallel legs, designed to accommodate a standard size pallet and features heavy-duty forged hook. Lowers rapidly with no-load, whilst providing smooth, controlled lowering under load conditions. Rear swivel wheels and handle make manoeuvring the crane a simple operation. Beam can be set in 4-positions, with a capacity of 2000kg at its full extension of 1870mm. Crane features two pumps one for slow, safe controlled lifting and a quick lift pump. Weighs 299kg and is suitable for workshop use.
3. SPECIFICATION
4. ASSEMBLY
5. OPERATION
5.1. LIFTING A LOAD
5.1.1. Screw the pump handle (#2) into the desired handle socket assembly (#3,
4) and pump the handle.
NOTE: Use the manufacturers recommended lifting points when lifting an engine.
5.2. LOWERING THE LOAD
5.2.1. To lower the load, slowly turn the release valve (#6) anti-clockwise.
5.2.2. When the load has been fully lowered turn the release valve clockwise
until fully closed.
NOTE: The fixed frame crane is fitted with a safety device that automatically
controls the speed of decent relative to the load.
5.2.3. After use ensure that the crane is fully retracted.
6. MAINTENANCE
6.1. NOTE: Maintenance and repair must only be carried out by qualified
person. Contact your Sealey stockist for details.
6.2. When the fixed frame crane is not in use, the hydraulic unit ram must be
fully retracted to minimise corrosion. Remove the handle to inactivate the
fixed frame crane.
6.3. Lubricate all moving parts at regular intervals.
6.4. Always keep the fixed frame crane clean, dry, and protected from harsh
conditions.
6.5. Should you need to replace the oil, ensure the hydraulic unit ram is
fully retracted. An excess of oil will render the fixed frame crane
inoperative.
Use only appropriate Sealey hydraulic jack oil (Sealey Part Number:
HJO500MLS/HJO5LS). DO NOT use brake fluid.
Purge the system to remove any air.
6.6. Check your model parts information for spares.
6.7. When not in use store in a safe, dry clean, childproof location.
IMPORTANT: NO RESPONSIBILITY IS ACCEPTED FOR INCORRECT USE OF THE MACHINE. Hydraulic products are only repaired by local service agents. We have service/repair agents in all parts of the UK.
DO NOT RETURN PRODUCT TO US. Please telephone us on 01284 757500 to
obtain the address and phone number of your local agent.
If product is under guarantee please contact your dealer.
De-commissioning Product
Should the product become completely unserviceable and require disposal, draw
off the oil into an approved container and dispose of the product and the oil
according to local regulations.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 36 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
© Jack Sealey Limited
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>