EXTREME EMX10SHA Bass Pro Formula Baitcast Reel Instruction Manual

EMX1 OSHA; EMX1 OSHLA; EMX1 OHA; EMX1 OHLA

Congratulations on your purchase of an EXTREME Baitcast Reel! This reel is manufactured with the highest-quality components and has been extensively tested to ensure that your day on the water is more productive. Please take a moment to familiarize yourself with the integrated performance-enhancing features of this reel before use. This will help you to optimize the reel’s settings and even further Increase your fishing success. We wish you the best of luck in your future angling adventures!

**Reel Specifications

**

Model| Bearings| Weight
(oz.)| Max
Drag (lbs.)| Line Capacity mono/braid (lbJyds.)| IPT| Gear Ratio
---|---|---|---|---|---|---
EMX1OSHA| 7 (6+1)| 7.4| 10| 10/135, 12/120, 14/95| 31″| 7.5:1
| | | | 30/155, 50/100, 65/75| |
EMX1OSHLA| 7 (6+1)| 7.4| 10| 10/135, 12/120, 14/95| 31″| 7.5:1
| | | | 30/155, 50/100, 65/75| |
EMX1OHA| 7 (6+1)| 7.3| 10| 10/135, 12/120, 14/95| 28″| 6.8:1
| | | | 30/155, 50/100, 65/75| |
EMX1OHLA| 7 (6+1)| 7.3| 10| 10/135, 12/120, 14/95| 28″| 6.8:1
| | | | 30/155, 50/100, 65/75| |

Left-Hand Retrieve

• 7-bearing system
• 1-piece aluminum frame
• ITB braking system
• Anodized-aluminum spool
• Recurve aluminum handle

Features and Operations Instructions

Inertial Transfer Braking System (ITB)
Your reel is equipped with an advanced braking system to help you manage backlash during a cast. It utilizes both centrifugal and magnetic force to control the speed of the spool. Simply turn the dial located on the palming side plate to increase or decrease the amount of magnetic force that is applied to the spool.
Cast-Control Knob
The cast-control knob is located on the handle side under the star drag. Its purpose is to apply continuous friction to the end of the spool shaft, assisting the braking system In maintaining the correct spool speed. This helps to prevent backlashes. To set the cast control, tie on your lure and reel it to the tip of the rod. Tighten the knob until it feels snug. Push the thumb bar. Your lure should not move. Hold the rod at a 2 o’clock position and slowly tum the knob counterclockwise until the lure starts to fall. Let the lure hit the ground and watch the spool. The spool should not spin more than 1 revolution alter the lure Ms the ground. If it spins more than 1 revolution, tighten the cast-control knob and repeat the procedure. If the spool does not spin after the lure hits the ground. the cast control is set too tight. Loosen the knob and repeat the procedure.
Powerlock™ Instant Antl-Reverse
Your reel is equipped with our Powerlock instant anti-reverse system. This is a special type of bearing that allows the handle to only tum forward. There is no play in the handle so you have complete control during the retrieve and no loose feeling. which is important during stop-and-go retrieves.|
Star Drag
Your reel has a powerful star drag for fighting stronger, faster fish. The drag washers provide a smooth, even flow of line when a fish surges to prevent the line from breaking. Even when wet. these washers won’t slip or grab. The star drag is the star-shaped wheel located behind the reel handle. To adjust, simply turn forward to increase drag or turn backward to decrease the amount of drag. To properly set the drag. you will need a spring scale. Your drag should be set at 25% of the test rating of
your line. Tie a loop at the end of your mainline. Run it through the guides of your rod and attach it to the hook on the scale. Pull the scale until it registers 25% of the line rating. If you are using a 10-lb. test then you should set your drag to start slipping at 2.5 lbs.
Machined-Aluminum Handle
Your reel comes equipped with an exceptionally strong machined aluminum handle for peak durability. It has been anodized to prevent corrosion.
Titanium-Nitride-Coated Line Guide
The line guide has been fitted with a low-friction Titanium-Nitride-Coated ring. This helps to minimize line abrasion.

Bass Pro Shops® and Cabela’s Fishing Reels Limited Warranty

Bass Pro Shops and Cabela’s will repair or replace (at our discretion) any Bass Pro Shops and Cabela’s reel which proves to be defective in workmanship or materials within 1 year from the original date of purchase. You must save your dated sales receipt for warranty validation. This warranty gives you specific legal rights, and you may have other rights which vary from state to state or province to province.
For reels purchased through our catalogs or Bass Pro Shops and Cabela’s online:

•   For reel replacement only: Return your reel postage prepaid with your dated sales receipt to the Return Center address listed on your receipt.
• For reel repair only: Return your reel postage prepaid with a copy of your dated sales receipt as proof of purchase and warranty validation to the Outdoor World Rod & Reel Repair4 address below.

Outdoor World Rod & Reel Repair, 2300 E.
Turner, Suite M, Springfield, MO 65803
This warranty does not cover lost parts, malfunctions, or damage due to abuse, accidents, or normal wear. Failure to clean, lubricate, and provide reasonable and necessary maintenance will void the warranty. Repairs needed to your reel due to abnormal use or modification, or after warranty expiration, are available for a reasonable charge from Outdoor World Rod & Reel Repair, providing the reel is returned postage paid.
Except to the extent prohibited by applicable law, there are no warranties or conditions, expressed or implied, other than those expressly set out herein. Bass Pro Shops and Cabela’s shall not, under any circumstances, be liable for an amount greater than the actual purchase price of the product nor for any special, incidental, or consequential damages suffered or incurred in connection with the product and Bass Pro Shops and Cabela’s does not assume, and does not authorize any person to assume for it, any obligation or liability other than those expressly set out herein.

Reel Care And Lubrication

Your new reel is designed to provide years of dependable service. But like any other precision machine, periodic cleaning and maintenance are required for continued peak performance. Reels made today require both a lightweight oil and grease. Oil and grease should be used sparingly; too much can have a negative impact on reel performance. There are lightweight oils and greases made specifically for fishing reels that can be found at basspro.com/cabelas.com As a rule of thumb, oils should be used to lubricate any moving part on the reel, e.g., ball bearings, bushings, handle joints, bail springs, etc. A grease should be used to lubricate the main drive gear and pinion gear. We do not recommend using any multipurpose oils. Many of these oils have properties that will attract dirt and dust to the internal parts. This may cause excessive wear and reduce the life of the reel. After each trip, the reel should be checked for dirt or sand. If it has been exposed to salt water, the spool should be removed and the entire reel rinsed in freshwater. Dry with a soft cloth and lubricate the reel as described above.

EMX10SHA; EMX10HA

EXTREME BAITCAST REEL:
NO PART-NAME

1| FRAME| 31| CAM PLATE| 62| RIGHT-SIDE COVER SCREW (A)| 90 SPOOL ASSEMBLY (INCL 1BALL BEARING)
---|---|---|---|---|---|---
2| CLUTCH-BAR PLATE (A)| 32| CAM-PLATE SCREW (A) x2| 63| RIGHT-SIDE COVER SCREW (B)| 94 BRAKE-HOLDER PLATE
3| CLUTCH-BAR PLATE (B)| 34| CLUTCH-BAR ASSEMBLY| 64| 0-RING| 95BRAKE-HOLDER- PLATE SCREW x2
4| UNE-GUIDE ASSEMBLY| 35| CLUTCH-BAR SCREW| 65| BALL-BEARING| 96 SPOOL SPACER
6| UNE-GUIDE PIPE| 36| BALL-BEARING| 66| BEARING RETAINER| 97BALL BEARING
7| WORM SHAFT| 37| CRANKSHAFT| 67| CAST-CONTROL CAP| 98BEARING RETAINER
8| BUSHING| 38| IDLER (1) WASHER (A)| 68| RIGHT-SIDE COVER SCREW (CXx2)| 99 SPOOL-COVER
9| IDLER(S)| 39| IDLER (L)| 70| TENSION WASHER| 100 MAGNET-HOLDER ASSEMBLY
10| WORM-SHAFT PIN| 40| IDLER (L) WASHER (B)| 71| WASHER| 103 MAGNET-HOLDER SPRING (x3)
11| WORM-SHAFT BUSHING| 41| BEARING PLATE| 73| LOCKING PIN| 104 SIDE CAM (H)
12| WORM-SHAFT WASHER| 42| E-RING| 74| LOCKING-PIN SPRING| 105 SUDE-CAM SCREW (x3)
13| E-RING| 43| BEARING-PLATE SCREW x2| 76| LUBE-PORT CAP| 106 SIDE CAM (D)
14| PILLAR| 48| PINION YOKE| 77| LUBE-PORT-CAP SCREW| 107 CONTROL DIAL
17| LINE-GUIDE PAWL| 49| PINION GEAR| 78| SLEEVE WASHER (OPTIONAL)| 108 CONTROL-DIAL CUCK SPRING
18| SPACER (OPTIONAL)| 50| PINION-YOKE SPRING x2| 79| SPRING WASHER (D) x2| 109 LEFT-SIDE COVER ASSEMBLY
19| PAWL CAP| 51| RATCHET| 80| CUCK HOLDER| 111 SPOOL-COVER SCREW (x3)
21| FRONT COVER| 52| RATCHET WASHER| 81| STAR-DRAG ASSEMBLY| 113 BUSHING
22| FRONT-COVER SCREW| 53| DRIVE GEAR| 82| TUCKER| 114 BRAKE CAM (A)
23| RETURN-PAWL SPRING| 54| DRAG WASHER (L)(A)| 83| CUCK PLATE| 115 BRAKE-CAM WASHER (A)
24| RETURN PAWL| 55| DRAG WASHER (D1)| 84| CUCK-PLATE RETAINER| 116 BRAKE CAM (B)
25| CLUTCH CAM| 56| DRAG WASHER (A)| 85| HANDLE WASHER| 117 BRAKE-CAM WASHER (B)
26| CLUTCH-CAM SPRING| 57| DRAG WASHER (D2)| 86| HANDLE ASSEMBLY (INCL 2BALL BEARINGS)| 118 BRAKE-CAM SPRING (B)
27| UNK PLATE| 58| SLEEVE| 87| HANDLE NUT| 119 BRAKE-CAM WASHER (C)
28| UNK-PLATE SCREW| 60| RIGHT-SIDE COVER ASSEMBLY| 88| HANDLE-NUT RETAINER| 120 E-RING
30| CLUTCH-CAM SCREW| 61| ONE-WAY CLUTCH| 89| HANDLE-NUT RETAINER SCREW| 121 BEARING WASHER
| | | | | | 123 DRAG WASHER (LXB)(x2)

EMX10SHLA; EMX10HLA

FRONT

MANUAL: EMX10A
Dwg No: 1Y0077160
2020-19-23: ARTWORK

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>