TELTONIKA TSW100 Ethernet Switch User Guide
- June 7, 2024
- teltonika
Table of Contents
TELTONIKA TSW100 Ethernet Switch User Guide
FRONT VIEW
BACK VIEW
POWER SOCKET PINOUT
RJ45 LED MEANING
TECHNICAL INFORMATION
Technical specificati
ons
Input voltage range*
|
7 – 58 VDC
Max power consumption no PoE devices connected
|
<9 W
Max PoE power budget at PSE**
| 120 W
Max Ethernet cable length|
100 m
**Bundled accessories specifications*****
Power adapter
|
Input: 1.8 A @100-240 VAC,
Output: 50 VDC, 1.3 A, 4 pin plug
* PoE operates properly only when connected power supply outputs 44 V or
higher voltage.
* Provided power supply only allows 60 W PoE power budget at PSE, to reach
maximum 120 W at PSE >130 W power supply must be used.
Order code dependent.**
HARDWARE INSTALLATION
- Connect your main internet router/modem to TSW100 LAN port number 5.
- Connect end devices (ex. IP camera) to TSW100 1 to 4 port, which you want to power via Ethernet.
- Connect 4 pin power plug to TSW100 to power up switch.
SAFETY INFORMATION
TSW100 switch must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
This sign means that all used electronic and electric equipment should not be mixed with general household waste.
This sign means that product meets the requirements of the applicable EU directives.
Wiki Knowledge Base
https://wiki.teltonika-networks.com/
http://www.teltonika-networks.com/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>