SVS PB-1000 Pro Subwoofer User Guide

: June 7, 2024
: SVS

Table of Contents

Unbox It
Set It Up
Hook It Up
Get Control
Get Calibrated
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SVS PB-1000 Pro Subwoofer User Guide

Congratulations on choosing the SVS PB-1000 Pro, one of the most powerful and advanced subwoofers in the world. We know you’re anxious to get it cranking so the following steps will guide you through the quick and easy installation process.

We strongly recommend reading the PB-1000 Pro Owner’s Manual to get the best possible performance out of your new subwoofer. You’ll find useful information about subwoofer placement, connections, DSP functions and more. The full SVS PB 1000 Pro Owner’s Manual can be found here: www.svsound.com/pb-1000-pro- manual.

Unbox It

If you followed the PB-1000 Pro Subwoofer unboxing instructions properly you will have the following items in front of you. Please confirm all pieces are available before continuing.

PB-1000 Pro Subwoofer
Removable Grille
Detachable Power Cord

Set It Up

The location of your subwoofer in the listening environment can affect its performance. If possible, start with corner placement
on the same wall as the front speakers, or anywhere along the front stage in between or outside of your main speakers.

Corner Placement: offers huge impact and reduces the
potential to encounter bass nulls, or ‘dead spots’. If “boominess” occurs, you can try pulling it away from the wall and
using the DSP tuning controls to smooth performance.
Induction Instructions

Front Placement: In between or to the side of the front
channel speakers often results in the best blending with the
main speakers and center channel and minimizes localization effects.
Induction Instructions

Side Wall Placement: Side wall placement is less frequently
used but can be an effective subwoofer location for
excellent accuracy and output.
Induction Instructions

Hook It Up

For most set-ups, a single RCA subwoofer interconnect cable running from the AV Receiver’s “SUB 1” output to the PB-1000 Pro’s
“LFE” line level input is all that’s required to connect the subwoofer into your system. If you run separate Preamplifier and Power
Amplifiers, follow the “Line Level Connection – Stereo Receiver or Preamplifier Left/Right Channels” connection guide below.

Your subwoofer is also equipped with speaker level inputs as an alternate connection method. For all details and setup info,
please see the full Owner’s Manual online at: www.svsound.com/pb-1000-pro- manual

Line Level Connection – Single LFE Channel

Line Level Connection – Stereo Receiver or Preamplifier Left/Right Channels

Get Control

Your SVS PB-1000 Pro Subwoofer can be controlled from the SVS Mobile App or via the rear panel for maximum flexibility when optimizing performance based on your room layout, speakers, system set-up and more.

Download The App

The SVS App is the easiest and most convenient way to access all of the advanced control features available on your PB-1000 Pro, from the comfort of your favorite seat.

For iOS, Android, & Amazon Devices

On The Subwoofer

The rear panel features an intuitive user interface with controls for adjusting the subwoofer’s primary settings. The blue LED bar shows settings for Volume, Low Pass Frequency, and Phase. Simply press the setting you want to change and then use the “+” and “-” buttons to adjust the settings.
Product Overview

Please note, some DSP settings can only be accessed using the SVS app.

Get Calibrated

For connection to an AV Receiver, set the PB-1000 Pro volume to -10 in the app (on the rear panel, all but the last two lights illuminated). Set the low pass filter to LFE and the phase to 0 degrees, then run auto-set-up on the AV Receiver. Always re-run set-up if you move the subwoofer to another location For connection to a Stereo Receiver or Preamplifier without auto-set-up, adjust the PB-1000 Pro volume to match the output of your main speakers, and adjust the low pass filter to blend the bass between the PB-1000 Pro and your speakers. If needed, consult with our Sound Experts on the best phase setting.

Induction Instructions

For additional guidance on recommended crossover or low pass filter settings specific to your system, visit our Subwoofer Matching Tool at www.svsound.com/merlin, or contact our Sound Experts.

Register Your New SVS Product:

Register Product Thank you for choosing SVS! Registering your SVS product expedites any Sound Experts support requests, confirms your warranty registration and provides a proof of purchase. Plus, as a registered customer, you’ll be the first to get SVS news and updates.

Need Help

Our Sound Experts are standing by to help with subwoofer placement, installation, calibration, AV receiver settings, room rattle and anything else you need advice about. Just call, email or chat online with our Sound Experts:
877-626-5623 | custservice@svsound.com | www.svsound.com