SVS 3000 In Wall Subwoofer Cutout Template Instruction Manual
- October 30, 2023
- SVS
Table of Contents
SVS 3000 In Wall Subwoofer Cutout Template
Product Information
The 3000 In-Wall Subwoofer is a high-quality audio device designed to be installed into the wall for optimal sound performance. The subwoofer features a cutout template for easy installation and comes with dimensions of 12.2 x 25.2 inches (310mm x 640mm) for the subwoofer cutout. The subwoofer also has rear panel dimensions of 12 x 25 inches (305mm x 635mm) for reference purposes. The device has secondary mounting holes for securing to wood studs.
Product Usage Instructions
- Choose the desired subwoofer location on the wall and attach the 3000 In-Wall Subwoofer Cutout Template to the wall using tape. Ensure that there are no hidden obstructions like studs inside the wall by checking before proceeding.
- Drill pilot holes at the four marked corners of the template [ ].
- Remove the template from the wall and use a straight edge to draw lines between the four pilot holes. This will create the subwoofer cutout.
- Cut along the lines of the rectangle and remove the section of wall.
- Install the 3000 In-Wall Subwoofer into the cutout and secure it to wood studs using the secondary mounting holes.
Note : It is recommended to seek professional help for installation if you are not experienced with installing in-wall subwoofers.
INSTRUCTION
-
Attach this template to the wall with tape at the desired subwoofer location.
( NOTE : Be sure to check for studs and other hidden obstructions inside the wall) -
Drill pilot holes at the four marked [ ] corners.
-
Remove this template from the wall and use a straight edge to draw lines between the four pilot holes, making the subwoofer cutout .
-
Cut along the lines of the rectangle and remove the section of wall
Subwoofer Cutout Dimensions
- 12.2” x 25.2” (310mm x 640mm)
Subwoofer Rear Panel Dimensions (For Reference Only)
- 12” x 25” (305mm x 635mm)
OVERVIEW
