SVS SPWADAPT Sound Path Wireless Audio Adapter Owner’s Manual

SVS SPWADAPT Sound Path Wireless Audio Adapter

SVS SoundPath Wireless Audio Adapter Owner’s Manual

SVS SoundPath Wireless Audio Adapter
Thank you for choosing SVS! The SoundPath Wireless Audio Adapter reduces subwoofer cable clutter without sacrificing performance and unlocks wireless connectivity for powered speakers, amplifiers and more. Transmit a pristine, full-range audio signal up to 65-feet at CD-quality and start enjoying the benefits of wireless audio now. Installation requires only a few simple steps. If you have questions about subwoofer or speaker placement, system optimization or installing the SVS SoundPath Wireless Audio Adapter, please contact the SVS Sound Experts tech support 7-days-a-week.

Specifications & Features

Adapter Includes

•  1 x Wireless Audio Adaptor Kit Transmitter
•  1 x Wireless Audio Adaptor Kit Receiver
•  2 x 3.5 mm to single RCA Interconnect cable (22”)
•  2 x 3.5 mm to dual RCA Interconnect cable (22”)
•  2 x USB A to Micro B Power Cables (32”)
•  2 x 5 VDC Power Supplies with USB A Connectors

What You Will Need

•  Subwoofer, powered speakers, or amplifier
•  AV receiver, surround processor, or 2-channel pre-amp with a subwoofer pre-out, or L/R line level pre-out

General Placement and Set-up Tips

•  Place the subwoofer, powered speakers or amplifier at its intended location.
•  Try to maintain line-of-sight (no walls or solid barriers) between the transmitter and receiver for best results.
•  Receiver should be within 65 feet of transmitter for best results.
•  Avoid placing the transmitter next to devices that could create signal interference, such as mobile phones, baby monitors, 2.4 GHz wireless phones and 2.4 GHz Wi-Fi routers.

Connecting the Wireless Transmitter to an AV processor

1.  Connect the 3.5 mm to single RCA adapter cable to the subwoofer pre-out or LFE channel of the AV processor and to the input on the wireless transmitter.
2.  Connect the USB A to Micro B cable to the wireless transmitter and the 5 VDC power supply.
3.  Connect the 5 VDC power supply to a 120V AC outlet.

Connecting the Wireless Transmitter to a 2-channel stereo pre-amp

1.  Connect the 3.5 mm to dual RCA adapter cable to the L/R line level pre-outs of the
2.  channel stereo pre-amp and to the input on the wireless transmitter.
3.  Connect the USB A to Micro B cable to the wireless transmitter and the 5 VDC power supply.
4.  Connect the 5 VDC power supply to a 120V AC outlet.

Connecting the Wireless Receiver to your Subwoofer

1.  For AV processor applications, connect the 3.5 mm to single RCA adapter cable to the LFE input and the input on the wireless receiver.
2.  For 2-channel stereo pre-amp applications connect the 3.5 mm to dual RCA adapter cable to both the L and R subwoofer inputs and to the input on the wireless receiver.
3.  Connect the USB A to Micro B cable to the wireless receiver and the 5 VDC power supply.
4.  Connect the 5VDC power supply to an AC outlet.

Connecting the Wireless Receiver to Power Amplifiers or Powered Speakers

1.  For 2-channel applications connect the 3.5 mm to dual RCA adapter cable to both L and R RCA inputs on the stereo amplifier or powered speakers and to the 3.5mm output on the wireless receiver.
2.  Connect the USB A to Micro B cable to the wireless receiver and the 5 VDC power supply.
3.  Connect the 5 VDC power supply to a 120V AC outlet.

Pairing the Transmitter and Receiver

1.  The transmitter and receiver are synched at the time of manufacture and will pair automatically when connected and powered on.
2.  The successful pairing will be indicated by a steady blue light on the transmitter and receiver.
3.  A flashing light indicates the units are not paired. To re-pair the units, perform the following actions:
4.  Press and hold the small button on one unit (it doesn’t matter which one you select) until the blue light starts blinking.
5.  Immediately walk over to the other unit and press/hold the small button until the blue light starts blinking.
6.  Both will blink a few times then turn solid blue when they are successfully paired.

FAQs and Troubleshooting

Does my AV processor correct for the latency (time delay) of the wireless unit?
Yes, this will be reflected in a longer than normal subwoofer distance, as shown under the set-up section of the AV processor. An additional 14-20 feet (beyond the actual subwoofer distance) is normal.

I keep hearing interference artifacts or experiencing signal drop-outs – how can I correct for this?
Always try to keep a line-of-sight between the transmitter and receiver units with no hard barriers or walls between them. Avoid placing other 2.4 GHz devices near the units like wireless phones, mobile phones, Wi-Fi routers, baby monitors, etc.

Warranty & Support

•  5-YEAR UNCONDITIONAL WARRANTY
•  SVS offers the industry’s most comprehensive warranty on all our products. SVS warrants the SoundPath Wireless Audio Adapter and all products to be free from defects in the workmanship for 5 years from date of purchase.
•  This, and all the SVS customer Bill of Rights can be viewed online at: www.svsound.com/bill-of-rights.

Share Your Thoughts
SVS Sound Experts are standing by Monday to Friday from 9AM-9PM ET, Saturday from 12PM-6PM, and Sunday from 12PM-4PM to assist you with set-up, optimization and any questions you have about the SoundPath Wireless Audio Adapter. They can be reached by phone, email or chat via the options below. www.svsound.com custservice@svsound.com 877-626-5623 We also invite you to share a review on our website and to join our fun and active social media community where we share reviews, featured systems, interesting audio articles and more.

References

• SVS | Speakers & Subwoofers (@svs_sound) • Instagram photos and videos
• Home Audio Speakers, Subwoofers and Cables | SVS
• Home Audio Speakers, Subwoofers and Cables | SVS
• SVS Customer Bill of Rights

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>