SVS 856677007886 SoundPath Tri-Band Wireless Audio Adapter Owner’s Manual
- June 5, 2024
- SVS
Table of Contents
SVS 856677007886 SoundPath Tri-Band Wireless Audio Adapter
Thank you for choosing SVS!
The following instructions will help you setup additional Tri-Band wireless
Receivers with your SVS SoundPath Tri-Band Wireless Audio Adapter. Before
proceeding, please complete the setup and pairing instructions for the primary
Transmitter/Receiver kit. Installation requires only a few simple steps. If
you have questions about subwoofer or speaker placement, system optimization
or installing the SVS SoundPath Tri-Band Wireless Audio Adapter, please
contact the SVS Sound Experts tech support 7-days-a-week.
custservice@svsound.com | 877.626.5623 |
www.svsound.com
Adding Additional Wireless Receivers
A single SVS SoundPath Tri-Band Wireless Audio Adapter Transmitter can wirelessly connect and transmit a signal to up to six (6) Receivers.
Before Pairing
Confirm the primary SoundPath Tri-Band Wireless Audio Transmitter and Receiver are paired. Successful pairing will be indicated by a steady blue light on both the transmitter and receiver.
Steps for Pairing Additional Receivers with Transmitter
- Connect additional Receiver to subwoofer or speakers via RCA cable and connect power cord via USB or AC power outlet. A slow flashing light indicates the unit is not paired.
- Press and hold the PAIR button located on the back of the Receiver until the blue LED light located on the top of the unit flashes quickly.
- Within 30 seconds, press and hold the PAIR button located on the back of the Transmitter.
- When your Transmitter and additional Receiver are paired, the wireless status lights on the top of both units will turn solid blue.
- Repeat steps for any additional Receivers.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>