SVS Sound Path Wireless Audio Adapter Owner’s Manual
- June 5, 2024
- SVS Sound
Table of Contents
SVS Sound Path Wireless Audio Adapter
**Owner's Manual**SVS SoundPath Wireless Audio Adapter Owner’s Manual – Addendum
Adding Additional Wireless Receivers
A single SVS SoundPath Wireless Audio Adapter Transmitter can wirelessly connect and transmit a signal to up to three (3) Receivers.
Before Pairing
Confirm the primary SoundPath Wireless Audio Transmitter and Receiver are paired. Successful pairing will be indicated by a steady blue light on both the transmitter and receiver.
Steps for Pairing Additional Receivers with Transmitter
- Power down any Receivers currently paired with the Transmitter. This can be done by disconnecting the power supply cable.
- Connect additional Receiver to subwoofer or speakers via RCA cable and connect power cord via USB or AC power outlet. A slow flashing light indicates the unit is not paired.
- Press and hold the PAIR button located on the top of the Receiver until the blue LED light located on the top of the unit flashes quickly.
- Within 30 seconds, press and hold the PAIR button located on the top of the Transmitter.
- When your Transmitter and additional Receiver are paired, the wireless status lights on the top of both units will turn solid blue.
- Power up any Receivers that were powered down in step #1.
- Repeat steps for any additional Receivers.
If you have questions about subwoofer or speaker placement, system optimization or installing the SVS SoundPath Wireless Audio Adapter, please contact the SVS Sound Experts tech support 7-days-a-week.
[email protected] | 877.626.5623 | www.svsound.com