audio-technica ES947C/TB3 Microphone Boundary User Manual
- June 7, 2024
- Audio-Technica
Table of Contents
Quick Start Guide
ES945O/TB3
ES945WO/TB3
Omnidirectional Condenser Boundary Microphone
Included accessories
How to Mount the product
Table/ceiling hole size (actual size)
Example: Mounting on a table
Connection procedure
The output connector is an XLR-M type with polarity as shown in the figure below.
For details, refer to the user manual available for download on our website: www.audio-technica.com
Thank you for purchasing this product. Before using the product, read through the user manual to ensure that you will use the product correctly. Please keep this manual for future reference.
Safety precautions
Although this product was designed to be used safely, failing to use it
correctly may result in an accident. To ensure safety, observe all warnings
and cautions while using the product.
Cautions for the product
- Do not subject the product to a strong impact to avoid malfunction.
- Do not disassemble, modify or attempt to repair the product.
- Do not handle the product with wet hands to avoid electric shock or injury.
- Do not store the product under direct sunlight, near heating devices or in a hot, humid or dusty place.
Notes on use
- Do not swing or carry the microphone by the cable to prevent the microphone from becoming disconnected or damaged.
- Do not wind the cable around the rack or allow the cable to become pinched.
- The microphone should be placed on a flat, unobstructed mounting surface.
- Placing any object on a surface (such as a conference table) before its finish is fully cured may result in damage to the finish.
Audio-Technica Corporation
2-46-1 Nishi-Naruse, Machida, Tokyo 194-8666, Japan
www.audio-technica.com
©2020 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com
〒194-8666
www.audio-technica.co.jp
Made in Japan