Pyle 300 Watt Outdoor Indoor Wireless Bluetooth Portable PA Speaker-Complete Features/User Manual

: June 5, 2024
: Pyle

pyle

Pyle 300 Watt Outdoor Indoor Wireless Bluetooth Portable PA Speaker

Pyle-300-Watt-Outdoor-Indoor-Wireless-Bluetooth-Portable-PA-Speaker-
imgg

Specifications

300 WATT PEAK POWER: 150 Watt RMS@4 Ohm
SOUND SYSTEM: 6.5″ Woofer and 1″ Tweeter System
FREQUENCY RESPONSE: 20-20kHz
WIRELESS BT OPERATION RANGE: 65 Feet
RECHARGEABLE BATTERY: 7.4V, Lithium, 1800mAh 2.5Wh
POWER SUPPLY: 110V/220V Switchable
UNIT DIMENSIONS (L X W X H): 8.5” x 4.0” x 12.5” -inches
SPEAKER TYPE: Subwoofer
BRAND: Pyle
RECOMMENDED USES FOR PRODUCT: For Music Players

Introduction

Pyle Pro’s 300 Watt Bluetooth 6.5″ Subwoofer Portable PA Loud Speaker System has Bluetooth for wireless audio streaming. Works with iPhones, Android phones, iPads, Tablets, and PCs. Indoor and outdoor use is ideal for personal or commercial application. For fast karaoke fun or public addresses, simply plug in the provided microphone with 10 ft mic cable into the 1/4″ Mic Input of the Stereo situated on the top of the control panel. You can use both wired and wireless microphones simultaneously. This box-style small amplifier Speaker and Mic Set also includes USB Flash Drive, SD Memory Card Readers, RCA and AUX Inputs for connecting external devices, and a 1/4″ Guitar Input connection for music jamming.

The built-in rechargeable battery in this heavy-duty battery-powered professional Portable PA Speaker makes it portable. Ideal for a backyard barbecue or a public event. Simply charge the item for 8 hours using the provided charger. It also includes an FM radio with LCD Digital Display Screen so you can listen to music from your favorite station. To ensure signal strength, extend the antenna. NOTE: Before using the product, please read the user manual.

WHAT’S IN THE BOX

Portable Bookshelf Speaker
Handheld Microphone
Wired Microphone Cable
Audio Connection Cable
Remote Control
Power Cable

FEATURES

Built-in BT for Wireless Audio Streaming
Works with All of Your Favorite Wireless BT Devices (iPhones, Androids, Smartphones, iPads, Tablets, PC, etc.)
Instant Karaoke: Includes Microphone & 1/4″ Mic Input
USB Flash Drive & SD Memory Card Readers
AUX (3.5mm) Input for Connecting External Devices
Built-in Rechargeable Battery (3 Hour Battery Life)
FM Radio
Volume, Mic Volume, Echo Controls
Convenient Carry Handle

PANEL DESIGN

Master volume controller
Mic volume controller
ECHO controller
MIC input slot
Full indicator lights
AC input
Charging indicator lights
Aux input
Display screen
Power ON/OFF switch
Rec/Replay function
Repeat function
Previous song selector Previous radio station
Play for Mp3 or other audio sources Auto scan for radio stations
Next song selector Next radio station
Input selectors
USB input for Mp3 player
SD/MMC card input for Mp3 player

REMOTE CONTROL

POWER ON/OFF

MODE
Press this button to select AUX/USB/BT/FM input mode. When you are recording-Press and hold this button more than 3 second, unit will delete the recorded files.

**MUTE

**

PLAY/PAUSE FUNCTION

FM MODE
Press this button once, unit will auto scan radio station.

EQ

FM MODE
Previous station

VOLUME – VOLUME +

0-9 USB/SD or preset radio stations selector
Repeat function for USB/SD
Recording function: Press and hold this button more than 3 seconds, unit will record what you say, then short press this button once, unit will play the recorded files. Use PREVIOUS/NEXT to select the recorded files.

INSTRUCTIONS

POWER ON/OFF

The PA speaker can be powered when connected to main power or using the internal 9V battery.

Connect the power cable to the top of the unit.
Connect the other end of power cable to main power.
Turn ON the switch for the main power.
The unit will automatically power ON when connected to main power.

NOTES

If you wish to use the internal battery to power the unit, just simply turn on the Battery switch located on the top of unit to ON.

CHARGING

Before using the PA speaker for the first time, charge the unit at least 8 hours.

Connect the power cable to the top of the panel.
Turn off the battery switch on the top of the panel.
Recharge indicator light will light when unit is charging.

NOTES
The internal battery will charge while the unit is being operated and the power switch is ON. It is better to charge the unit while the power switch is off.

USING THE WIRED MICROPHONE

You can connect the wired microphone to this unit using the MIC INPUT located on the top of control panel.

Turn OFF the unit.
Connect your wired microphone to the MIC INPUT located on top of the control panel.
Adjust the microphone volume by tuning the MIC VOL/ECHO knobs located on top control panel.

NOTES
You can use the wired microphone and wireless microphone at the same time.

CONNECTING A GUITAR

You can connect your Guitar to unit using the 1/4″ GUITAR INPUT plug.

Turn ON the unit.
Connect your guitar cable to GUITAR INPUT port on top control panel.
Adjust the volume by turning the GUITAR VOL on top control panel.

USB/SD CARD PLAYBACK

You can play music from USB stick or SD Card using the USB/SD slot on the PA speaker.

Turn ON the unit.
Insert your USB or SD card into the slot.
Once inserted the USB or SD card unit will begin automatic play.
You can use the PRE/NEXT/PLAY/PAUSE to control and play music.

NOTES
The speaker system can play the following audio file formats: MP3, MP4, WMA.

The USB/SD Card no more than 32GB. Operation may be slower when searching large memory files. It will need several seconds to respond when your USB/SD Card is full of contents.

WIRELESS BT PLAYBACK

You can connect your Wireless BT phone or other devices to the PA speaker.
Turn ON the unit.
Press the INPUT button which located on top control panel, near the USB/SD slot.
The Wireless BT is active when you hear two “tone” indicator sound.
Use your Wireless BT phone or other devices to search for the PA speaker. It will be displayed as PYLE SPEAKER.
Connect your devices with PYLE SPEAKER, it will pair with unit automatically.
You do not need code and get connected with unit.
Play music on your phone or device, sound will come from the speaker through the Wireless BT connection.

You can use the VOLUME to adjust the sound level for Wireless BT, also you can adjust the Wireless BT music sound through your own phone or other device.

NOTES
If there is no sound through the PAspeaker during Wireless BT, Check the volume controller both on the unit and on your phone or other device.

USING THE RADIO

Turn ON the unit.
Press Mode button (Unit/Remote control) to select FM mode.
Press “Scan” button which was located on front panel, unit will auto search and store the radio stations with the strongest signal.
Press PRE/NEXT button to select desired radio station.

Ensure that you have the extended the antenna located on the rear of the speaker. It will ensure the best possible radio quality and signal strength.

USE OF THE EXTERNAL BATTERY OPTION

To use the PA speaker longer than the internal battery life, you can connect the PA speaker to a external 9V Battery Source.

Find the INPUT DC 9V on the top control panel.
Use the correct cable connect the INPUT DC 9V.

NOTES
The PA speaker will consume the internal battery first, when it is low, the LOW BATTERY indicator light located on the control panel will turn on, you can use the external 9V battery to power on the unit. The external12V battery will also charge the internal battery while in use.

RECORDING AND REPEAT FUNCTION

When you insert USB or SD card, insert the Microphone, press Record/Replay button more than 3 seconds, the unit will record what you say, then short press this button, unit will replay the recorded files. Use PRE/NEXT to select the recorded files. If you don’t want to keep the recorded files, press and hold MODE button for 3 seconds, unit will delete the recorded files.

Frequently Asked Questions

How do you turn on noise-canceling headphones with active noise cancellation?
Simply touch and hold one of the earbuds while wearing both of them to activate Active noise cancellation on the Buds themselves. A beep will sound, indicating that Active noise cancellation is enabled.
What’s wrong with my Monster headphones?
Make sure the cord is correctly connected on both ends. To figure out which jack is causing the problem, try utilizing the jack in the other earpiece of the headphones. Also, see whether the headphones are the problem by inserting them into a different device.
What is the procedure for resetting my Monster headphones?
Please remove the headphones and simultaneously push both sides for 8 seconds; the earphones will sound Power Off; when you return, there will be two beeps and the headset will automatically delete all pairing information.
What happened to the ANC button?
Press the ANC button on the left earcup to turn ANC on or off. The change will be confirmed via a voice announcement.\
What is the purpose of the ANC button?
To eliminate undesirable background noise, Active Noise Cancellation (ANC) employs a noise cancellation technology.
How long does it take to charge monster headphones?
Only receiving approximately 2 hours of play time from them instead of having to charge them for much longer, say 4-6 hours for full charge.
What is the best way to link my monster headphones to my phone?
Check to see if your phone or music player is turned on. 2. To pair the headset with a device if it has not been previously paired, turn it on; it will immediately enter pairing mode, and the blue and red indicator lights will begin to flash rapidly. The headset is connected to your device and ready to use.
What’s wrong with my wireless headphones?
Make sure the Media Audio setting is turned on if your Bluetooth headphones aren’t producing any sound. Go to Settings and select Bluetooth when wearing your Bluetooth headphones. Choose your Bluetooth headphones from the drop-down menu. Make sure Media Audio is turned on on the following screen.
What’s the best way to connect my Monster headphones to my iPhone?
Go to your second phone’s Bluetooth settings and connect your headphones using that phone or a friend’s phone. Push and hold the menu and volume down buttons on your headphones at the same time. Wait until your headphones say “ready to pair.”
What’s the best way to get my Monster headphones to work with my Samsung Smart TV?
Make that the headphones are in Bluetooth pairing mode and that they are discoverable. If necessary, see the product’s user handbook for instructions. Select the headphones to pair with from the Bluetooth audio device list on your TV. Depending on the model of television you have, the procedure varies slightly.