Endeavour Fires 3D Media Wall Inset Electric Fireplace Instruction Manual
- June 14, 2024
- Endeavour Fires
Table of Contents
Remove the Front Glass Panel before Installation
- Remove the two screws and the glass retaining strip as shown below.
- Unscrew the four ST4*8 screws on both sides of the appliance, and remove the top brackets as shown below, ensuring the glass panel is supported all the time.
- Remove the front glass panel and take out the decorative items and remote pack. Now its time to install your fire to do this follow the instructions in the remote pack.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>