KOHLER K-1163-S1 Sunward Oval Bath Instruction Manual
- June 12, 2024
- Kohler
Table of Contents
KOHLER K-1163-S1 Sunward Oval Bath
Product Information
Product Name: 60 x 42 drop-in bath K-1163-S1
Features:
This drop-in bath provides a comfortable bathing experience.
- Oval basin creates a spacious bathing experience
- Integral lumbar support and armrests offer extra comfort while bathing
- Textured bottom surface
Material:
The bath is made of high-quality materials for durability.
- Acrylic
Installation:
The bath can be installed as a drop-in.
- Reversible drain
- Drop-in
Recommended Products/Accessories:
- K-576 Undermount installation kit for K-1162/K-1163 baths
- K-1491 Bath/Whirlpool Pillow
- K-1601 Bath/whirlpool footstop, removable
- K-11677 Bath Drain
- K-23726 Drain treatment
- K-23732 Tub & shower cleaner
- K-31796 Above-the-floor bath drain kit
- K-31798 Bath drain kit
Codes/Standards: The bath meets CSA B45.5/IAPMO Z124 standards.
Available Colors/Finishes: The bath is available in the color White.
Product Usage Instructions
- Measure your actual product for rough-in details before installation.
- Install the bath according to the provided installation instructions.
- Ensure that the hot water supply is at least 70% of the capacity of the bath or greater.
- If you prefer an under-mount installation, the K-576 Undermount installation kit is required (sold separately).
- To enhance your bathing experience, consider using the recommended accessories such as the K-1491 Bath/Whirlpool Pillow and K-1601 Bath/whirlpool foot stop.
- For maintenance, use the K-23726 Drain treatment and K-23732 Tub & shower cleaner to keep the bath clean and functioning properly.
- If you need to modify the drain location, refer to the reversible drain feature for flexibility.
- The bath has a water depth of 15 inches and a water capacity of 57 gallons.
- Use the provided template (Drop-in, 1042556-7) for accurate installation.
Please refer to the official website, www.kohler.com, for detailed warranty information and the most current Specification Sheet.zContact Kohler Co. at 1-800-4KOHLER (1-800-456-4537) for any further inquiries or assistance.
Dimensions
No change in measurements if connected with drain illustrated. (K-11677)
Recommended faucet area
Technical Information
All product dimensions are nominal.
- Installation: Drop-in
- Drain location: Reversible
- Basin area, bottom: 43″ x 21-9/16″ (1092 mm x 548 mm)
- Basin area, top: 53-1/2″ x 32-1/8″ (1359 mm x 816 mm)
- Weight: 75 lbs (34 kg)
- Minimum floor load: 33 lbs/ft² (161.1 kg/m²)
- Water depth: 15″ (381 mm)
- Water capacity: 57 gal (215.8 L)
- Template: Drop-in, 1042556-7, required, included
Notes
Measure your actual product for rough-in details.
Install this product according to the installation instructions. The hot water
supply should be 70% of the capacity of the bath or greater. Installations
will vary. Kit is required for under-mount installations (sold separately).
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications. For the most current Specification Sheet, go to
www.kohler.com.
8-13-2023 20:20 – US/CA
KOHLER® Plastic Baths and Receptors Lifetime Limited Warranty
See website for detailed warranty information.