KONCAR M23CEG Microwave Ovens Owner’s Manual

KONCAR M23CEG Microwave Ovens

Upute su dostupne na web adresi: www.koncar-ka.hr

Read these instructions carefully before using your microwave oven, and keep it carefully.
If you follow the instructions, your oven will provide you with many years of good service.

PRECAUTIONS TO AVOID POSSIBLE EXPOSURE

TO EXCESSIVE MICROWAVE ENERGY
(a) Do not attempt to operate this oven with the door open since this can result in harmful exposure to microwave energy. It is important not to break or tamper with the safety interlocks.
(b) Do not place any object between the oven front face and the door or allow soil or cleaner residue to accumulate on sealing surfaces.
(c) WARNING: If the door or door seals are damaged, the oven must not be operated until it has been repaired by a competent person.
ADDENDUM
If the apparatus is not maintained in a good state of cleanliness,its surface could be degraded and affect the lifespan of the apparatus and lead to a dangerous situation.

Specifications

|
---|---
Rated Voltage:| 230V~ 50Hz
Rated Input Power(Microwave):| 1250W
Rated Output Power(Microwave):| 800 W
Rated Input Power(Grill):| 1000 W
Oven Capacity:| 23 L
Turntable Diameter:|  270 mm
External Dimensions:| 485x408x293mm
Net Weight:| Approx. 13 kg

IMPORTANT SAFETY INSTRUCTIONS

WARNING
To reduce the risk of fire, electric shock, injury to persons or exposure to excessive microwave oven energy when using your appliance, follow basic precautions, including the following:

1. Read and follow the specific: “PRECAUTIONS TO
   AVOID POSSIBLE EXPOSURE TO EXCESSIVE
   MICROWAVE ENERGY”.

2. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Children less than 8 years of age shall be kept away unless continuously supervised.

3. Keep the appliance and its cord out of reach of children less than 8 years.

4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.( For appliance with type Y attachment)

5. WARNING : Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.

6. WARNING: It is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to microwave energy.

7. WARNING: Liquids and other foods must not be heated in sealed containers since they are liable to explode.

8. When heating food in plastic or paper containers, keep an eye on the oven due to the possibility of ignition.

9. Only use utensils that are suitable for use in microwave ovens.

10. If smoke is emitted, switch off or unplug the appliance and keep the door closed in order to stifle any flames.

11. Microwave heating of beverages can result in delayed eruptive boiling, therefore care must be taken when handling the container.

12. The contents of feeding bottles and baby food jars shall be stirred or shaken and the temperature checked before consumption, in order to avoid burns.

13.  Eggs in their shell and whole hard-boiled eggs should not be heated in microwave ovens since they may explode, even after microwave heating has ended.

14. The oven should be cleaned regularly and any food deposits removed.

15. Failure to maintain the oven in a clean condition could lead to deterioration of the surface that could
    a dversely affect the life of the appliance and possibly result in a hazardous situation.

16. The appliance must not be installed behind a decorative door in order to avoid overheating. (This is not applicable for appliances with decorative door.)

17. Only use the temperature probe recommended for this oven.(for ovens provided with a facility to use a temperature-sensing probe.)

18. The microwave oven shall not be placed in a cabinet unless it has been tested in a cabinet.

19. The microwave oven must be operated with the decorative door open. (for ovens with a decorative door.)

20. This appliance is intended to be used in household and similar applications such as:

    • staff kitchen areas in shops, offices and other working environments;
    • by clients in hotels, motels and other residential type environments;
    • farm houses;
    • bed and breakfast type environments.

21. The microwave oven is intended for heating food and beverages. Drying of food or clothing and heating of warming pads, slippers, sponges, damp cloth and similar may lead to risk of injury, ignition or fire.

22. Metallic containers for food and beverages are not allowed during microwave cooking.

23. The appliance shall not be cleaned with a steam cleaner.

24. The appliance is intended to be used freestanding.

25. The rear surface of appliances shall be placed against a wall.

To Reduce the Risk of Injury to Persons  Grounding Installation

DANGER
Electric Shock Hazard Touching some of the internal components can cause serious personal injury or death. Do not disassemble this appliance.

WARNING
Electric Shock Hazard Improper use of the grounding can result in electric shock. Do not plug into an outlet until appliance is properly installed and grounded.
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

Consult a qualified electrician or serviceman if the grounding instructions are not completely understood or if doubt exists as to whether the appliance is properly grounded.

If it is necessary to use an extension cord, use only a 3-wire extension cord.

1. A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.
2. If a long cord set or extension cord is used:
3. The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance.
4. The extension cord must be a grounding-type 3-wire cord.
5. The long cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.

CLEANING

Be sure to unplug the appliance from the power supply.

1. Clean the cavity of the oven after using with a slightly damp cloth.
2. Clean the accessories in the usual way in soapy water.
3. The door frame and seal and neighboring parts must be cleaned carefully with a damp cloth when they are dirty.
4. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass.
5. Cleaning Tip—For easier cleaning of the cavity walls that the food cooked can touch: Place half a lemon in a bowl, add 300ml (1/2 pint) water and heat on 100% microwave power for 10 minutes. Wipe the oven clean using a soft, dry cloth.

UTENSILS CAUTION
Personal Injury Hazard It is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to microwave energy.

See the instructions on “Materials you can use in microwave oven or to be avoided in microwave oven.” There may be certain non-metallic utensils that are not safe to use for microwaving. If in doubt, you can test the utensil in question following the procedure below.
Utensil Test:

1. Fill a microwave-safe container with 1 cup of cold water (250ml) along with the utensil in question.
2. Cook on maximum power for 1 minute.
3. Carefully feel the utensil. If the empty utensil is warm, do not use it for microwave cooking.
4. Do not exceed 1 minute cooking time.

Materials you can use in microwave oven

Materials to be avoided in microwave oven

SETTING UP YOUR OVEN

Names of Oven Parts and Accessories
Remove the oven and all materials from the carton and oven cavity.
Your oven comes with the following accessories:

• Glass tray 1
• Turntable ring assembly 1
• Instruction Manual 1

Grill Rack( Can not be used in microwave function and must be placed on the glass tray )

A) Control panel
B) Turntable shaft
C) Turntable ring assembly
D) Glass tray
E) Observation window
F) Door assembly
G) Safety interlock system

Turntable Installation

a. Never place the glass tray upside down. The glass tray should never be restricted.
b. Both glass tray and turntable ring assembly must always be used during cooking.
c. All food and containers of food are always placed on the glass tray for cooking.
d. If glass tray or turntable ring assembly cracks or breaks, contact your nearest authorized service center.

Countertop Installation

Remove all packing material and accessories.
Examine the oven for any damage such as dents or broken door. Do not install if oven is damaged.

Cabinet: Remove any protective film found on the microwave oven cabinet surface. Do not remove the light brown Mica cover that is attached to the oven cavity to protect the magnetron.

Installation

1. Select a level surface that provide enough open space for the intake and/or outlet vents.
   A minimum clearance of 7.5cm is required between the oven and any adjacent walls. One side must be open.

2. Leave a minimum clearance of 30cm above the oven.

3. Do not remove the legs from the bottom of the oven.

4.  Blocking the intake and/or outlet openings can damage the oven.

5. Place the oven as far away from radios and TV as possible.
   Operation of microwave oven may cause interference to your radio or TV reception.

6. Plug your oven into a standard household outlet.
   Be sure the voltage and the frequency is the same as the voltage and the frequency on the rating label.

WARNING: Do not install oven over a range cooktop or other heat-producing appliance. If installed near or over a heat source, the oven could be damaged and the warranty would be void.

The accessible surface may be hot during operation.

Programs button
Defrost button
Microwave Power button
Barbecue button
Stop button
Child lock button
Start button
Weight

Operation Instructions

Clock Setting
When the microwave oven is electrified, the screen will display “00:00”, buzzer will ring once.The p rogram goes into standby mode.

1. In standby state, the rotary encoder switch adjusts the hourly position. The hourly position flickers from the beginning, the minute bit always lights up at 00, the clock sign lights up, and the hourly position is set clockwise from 0-23 or counter-clockwise (from 23-0).

2. After setting the hourly position, press the start key to determine the hourly position, and adjust the minute position. The minute position flickers from 00. The rotary coding switch adjusts the clockwise minute position. The clockwise minute is set from 0-59 or counterclockwise from 59-0.

3. Press the start key to confirm the clock, the clock sign is off, the LED stop flickering, display the set clock hh: mm, buzz, second flicker sign “:” flicker display, the clock is set.

4. In the running state of the clock, pressing the “Stop” key or opening the furnace door has no effect on the clock, and the clock continues to run.
   Note:

5. The clock is 24-hour system. If the clock is not set after power-on, the clock will not be timed (flicker display 00:00);

6. If the start key is not pressed to confirm after setting the clock, there will be no operation within 1 minute, the set content is invalid, and the LED will return to its pre-set state.

Time change

1. At the same time, press the stop key and the start key for 2 seconds, buzz, the current LED display time hh: mm starts to flicker, the clock sign lights up, and enters the state of clock change;
2. Press the start key to adjust the hourly position once, buzz, flicker, constant brightness of the minute position, rotate the code switch to adjust the hourly position, change the clock from big to small when turning left, change the clock from small to big when turning right, confirm the adjustment of the hourly position by pressing the start key, stop flickering, constant brightness of the hourly position, buzz at the same time. The clock began to flicker.
3. Rotate the code switch to adjust the minute position of the clocks. When left-handed, the clock changes from big to small. When right-handed, the clock changes from small to big.
   Press the start key to confirm the time of adjusting the minute position. The minute bit stops flickering, buzzes, the clock changes successfully, the clock sign goes out, and the LED often lights up  the time after the current change.

Microwave Cooking

1. In standby mode, press the microwave button LED to always show “800”, while the microwave sign and high-fire sign are lit.
2. Continue to press this button several times, select the microwave power, the LED in turn is alwaysbright and cyclic. Indicates “800”, “640”, “400”, “240”, “80”. At this time,  the microwave power can also be selected by rotating the encoding switch.
3. Press the start button to confirm the current firepower, and the LED will always show the time setting interface: 0:00.
4. Rotating encoder switch adjusts cooking time, LED often shows the input cooking time, cooking time setting range is 0:10-95:00;
5. Press the start button, buzzer sounds, cooking begins, LED countdown always shows the remaining cooking time, microwave signs (fire signs flashing at 800 power) flashing display, second flashing signs “:” always bright display;
6. Open the oven door or press the stop button during the cooking process. Cooking is paused to show the remaining cooking time. After the door is closed, press the start button to restart the cooking process. If you press the stop key again, you will return to standby.

Grill Cooking

1. In standby state, press the microwave key LED to always light up “800”, continue to press this button several times, the second LED to always light up “G”, and the barbecue sign to light up.
   If you press this button several times, you can choose to combine firepower. At this time, the rotary code switch can also choose barbecue or combination. When the combination firepower is selected, the microwave sign and barbecue sign will be lighted accordingly.

2. When the second LED display “G”, press the start button to confirm that the LED often brightens the display time setting interface: 0:00.

3. Rotating code switch adjusts the cooking time of barbecue. LED always shows the input time.
   The maximum time of barbecue cooking can be set to 95 minutes (range 0:10-95:00).

4. Press the start button, buzzer sounds, cooking begins, LED countdown shows the remaining cooking time, barbecue sign flashes, second flashing sign “:” always bright display.
   Open the oven door or press the stop button during the cooking process. Cooking is suspended to show the remaining cooking time. After the door is closed, press the start button to restart the cooking process. If you press the stop key again, you will return to standby.

Grill or Combi. Cooking

1. In standby state, press the microwave button to display “800” frequently. Continue to press this button several times. The second LED will always show “G” and the barbecue sign will light up at the same time. At this time, the rotary encoder switch can also choose barbecue or combination.

2. 2）If you press this button several times, you can choose to combine firepower. When the middle two of the LEDs often show “G1” or “G2”, it means “combined fire”one or “combined fire” two. The microwave sign and the barbecue sign are lit together.

3. Press the Start button to confirm that the LED will always show the time setting interface: 0:00.

4. Rotating code switch adjusts the cooking time of barbecue. LED always shows the input time.
   The maximum time of barbecue cooking can be set to 95 minutes (range 0:10-95:00).

5. press the start button, buzzer sounds, cooking begins, LED countdown shows the remaining cooking time, microwave, barbecue signs flashing display, second flashing sign “:” always bright display;

6. When the oven door is opened or the stop button is pressed during the cooking process, the cooking is suspended to show the remaining cooking time. After the door is closed, press the start button to restart the cooking process. If you press the stop key again, you will return to standby.

Defrost By Time

1. Press ” defrost ” button in standby state, and the last three LEDs will always show “d01”, while the microwave and timely thaw signs will always be displayed.

2. Press the Start button to confirm the current selection of the timely thaw menu.
   The LED always shows the initial time at 0:00.

3. Input thawing time of rotary coding switch, increase right-handed time and decrease left-handed time.

4. Press the start button, buzzer sounds, LED countdown always shows the remaining cooking time, start thawing on time, microwave signs, timely thawing signs flashing display, thawing firepower is P30.
   note

5. The default microwave fire for timely thawing is P30, which can not be modified manually.

Auto Menu

1. Press the programs button in standby state, and the automatic cooking icon is always bright.
   The last three of the LEDs always show P01. If you press this button several times or rotate the code switch, you can choose different menu P01-P06, from P01-P06 to right-handed P06-P01when left-handed.

2. Select the current automatic menu, press the start button, buzz, LED display the minimum weight of the current menu, and light the weight icon. At this time, we can rotate the encoding switch to select different components, the left-handed component is from large to small, and the right-handed component is from small to large.

3. Press the start button, buzz, automatic cooking starts, microwave sign (barbecue sign) shines,automatic cooking icon shines, weight sign goes out, LED countdown often shows the remaining cooking time.

The menu chart:

Function

|

Screen#1

|

Screen#2

|

Screen#3

---|---|---|---

P1 – Broccoli

| P01| 150| mm:ss
P01| 300| mm:ss
P01| 450| mm:ss

P2 – Peeled potatoe

| P02| 150| mm:ss
P02| 300| mm:ss
P02| 450| mm:ss

P3 – Fresh fish filets

| P03| 100| mm:ss
P03| 200| mm:ss
P03| 300| mm:ss

P4 – Pasta gratin

| P04| 400| mm:ss
P04| 600| mm:ss
P04| 800| mm:ss

P5 – Vegetable gratin

| P05| 400| mm:ss
P05| 600| mm:ss
P05| 800| mm:ss

P6 – Fresh prepared pizza

| P06| 200| mm:ss
P06| 400| mm:ss
P06| 600| mm:ss

  Quick Barbecue Cooking

1. In standby state, press the barbecue key once, the barbecue sign flashes, and the barbecue cooking can start for 3 minutes immediately. At this time, the three reciprocal digits behind the digital tube show 3:00.
2. Press the barbecue button once more, the cooking time is increased by 3 minutes, and the reciprocal display of the LED synchronization update shows the cooking time. The maximum setting time is 95 minutes.

Fast Microwave Cooking

1. In standby state, press the start button once to start 30 seconds and 100% microwave firepower cooking immediately. At this time, microwave signs and firepower signs light up and flicker, and LED countdown always lights up to show the remaining cooking time at 00:30.
2. At this time, the cooking time can be increased by 30 seconds per press, and the cooking time can be synchronously displayed by LED. The maximum time can be set to 95 minutes.
3. Microwave, barbecue or combination cooking and timely thawing cooking, in the cooking process, you can press the start key to increase cooking time. During the automatic menu process,you can’t press the start button to increase cooking time.

Lo ck-out Function for Children

Lock:
In standby state, press the child lock key, buzz three times into the child lock state, the child lock sign lights up, LED flashes show “00:00” or show the current clock.

Lock quitting:
In the child lock state, press the child lock key and buzz three times to unlock.

Troubleshooting

According to Waste of Electrical and Electronic Equipment (WEEE) directive, WEEE should be separately collected and treated. If at any time in future you need to dispose of this product please do NOT dispose of this product with household waste. Please send this product to WEEE collecting points where available.

KONČAR – KUĆANSKI APARATI d.d.
Slavonska avenija 16 , 10001 Zagreb , Hrvatska
tel : ++ 385 1/2484 555
fax : ++ 385 1/2404 102
www.koncar-ka.hr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>