audio-technica BHA100-AT Balanced Amplifier Headphone User Guide
- June 7, 2024
- Audio-Technica
Table of Contents
AT-BHA100c
User Guide
Thank you for purchasing this Audio-Technica product. Before using the product, read through the user manual to ensure that you will use the product correctly. Please keep this manual for future reference.
Safety precautions
Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.
Important information
Warning:
To prevent fire or shock hazards, do not expose this apparatus to rain or
moisture.
Caution:
- Do not expose this apparatus to drips or splashes.
- To avoid electric shock, do not open the cabinet.
- Refer servicing to qualified personnel only.
- Do not expose this apparatus to excessive heat such as that generated by sunshine, fire, or other heat sources.
- Do not subject this apparatus to strong impact.
- This apparatus should be located close enough to the AC outlet so that you can easily grasp the AC adapter at any time.
- In case of emergency, disconnect the AC adapter quickly.
- Do not place any objects filled with liquids, such as vases, on this apparatus.
- To prevent fire, do not place any naked flame sources (such as lighted candles) on this apparatus.
- Do not install this apparatus in a confined space such as a bookcase or similar unit.
- Install this apparatus only in a place where ventilation is good.
- To prevent fire, do not cover the ventilation of this apparatus with newspapers, table cloths, curtains, etc.
- In order to maintain proper ventilation, do not place any objects around the rear of this apparatus. This apparatus should be placed at least 10 cm away from the rear wall. This apparatus should not be placed near other electrical apparatuses. Keep the top and sides of this apparatus at least 10 cm away from any other surface if sitting on shelving, such as an audio apparatus rack. Failure to do so may cause this apparatus to overheat, which in turn may cause it or surrounding items to catch fire.
- In the case of horizontal installation, be sure to attach the included feet to the four corners of the bottom of the product (two of the six are spare feet). In case of vertical installation, be sure to attach the included stand.
For customers in the USA
FCC Notice
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution:
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this equipment. Note: This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Contact:
Responsible Company: Audio-Technica U.S., Inc.
Address: 1221 Commerce Drive, Stow, Ohio 44224, USA
Tel: 330-686-2600
For customers in Canada
IC statement: CAN ICES-3 (B)/NMB-3(B)
Notes on use
- Be sure to read the connected device’s user manual before use.
- Headphone output terminals of the product are for the use of stereo headphones only. Never connect devices other than stereo headphones.
- To connect 3.5 mm stereo headphone mini-plug, use an appropriate conversion plug adapter (sold separately). Please note that, depending on the shape of the conversion plug, it may be difficult to remove it from the jack.
- The contact pressure of the jack of the product is designed to be a little stronger in order to improve the sound quality. It may be difficult to remove some plugs (especially small plugs that are hard to grip) from the jack.
- When turning on/off the power or connecting headphones to the product, make sure to set the volume to the minimum level. Sudden loud sounds may have bad effects on hearing. Also, it may cause the failure of the headphone.
- Purchase a cable suitable for the device to be connected.
- Fully insert the plug of the connecting cable.
- Stop music playback when plugging or unplugging cables.
- A vacuum tube used in the product can cause it to become hot, but this is not a malfunction.
- Keep the product at least 1 m from inverter-type fluorescent lights, LED lamps, mobile phones, Wi-Fi, and other wireless devices. If you use this product near those devices, noise may be caused.
- A vacuum tube is used in the product. To get sufficient sound quality, make sure to turn on the power and age it before using the product.
–Before using it for the first time: at least 3 days
–Before each use: at least 15 minutes
Part names and functions
| 1. Power indicator lamp | 7. Balanced output terminal (XLR 4 pin male) |
|---|---|
| 2. Power button* | 8. 6.3 mm headphone output indicator lamp |
| 3. Input selector | 9. 6.3 mm headphone output terminal |
| 4. Headphone output selector | 9. Volume indicator lamp |
| 5. Balanced output terminal | 10. Volume control |
| 6. Headphone output |
| 1. Gain switch | 4. LINE input terminal |
|---|---|
| 2. LINE output terminal | 4. Balanced input terminal (Lch) |
| 3. LINE input terminal | 5. Power input jack |
Included accessories
Installing the product
- Horizontal installation
- Vertical installation
Making connections
- When connecting headphones in a balanced connection, connect to either the 4.4 mm headphone output terminal or the balanced output terminal.
- When using the 6.3 mm headphone output terminal, two headphones can be used simultaneously.
www.audio-technica.co.jp/support/
For more information on how to use this product and troubleshoot any problems, refer to the user manual on the Audio-Technica website.
Audio-Technica Corporation
2-46-1 Nishi-Naruse, Machida, Tokyo 194-8666, Japan www.audio-
technica.com
©2020 Audio-Technica Corporation Global Support Contact: www.at-
globalsupport.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>