Homematic IP 3067056 Window and Door Contact with Magnet Instruction Manual
- June 3, 2024
- Homematic IP
Table of Contents
3067056 Window and Door Contact with Magnet
Instruction Manual
Window and Door Contact with Magnet
Homematic IP Window / Door Contact with magnet
Installation and brief instructions
Proceed to the detailed manual.
https://homematic-
ip.com/sites/default/files/downloads/hmip-swdm-um-web.pdf
Read the instructions carefully and keep them in a safe place.
Attention! This indicates a hazard.
Important additional information.
Device overview
A Bracket
B Electronic unit
C System button (teach-in button and LED)
D Magnet contact
E Spacer (6 mm) for magnetic contact
F Battery compartment
Connect device to:
A Homematic IP Radiator Thermostat – basic
B Homematic IP Access Point (Cloud)
C Central Control Uni
*Teach-in HmIP device
Select a mounting location
A Window or door
B Mounting position
C Mounting overview
Mounting
A Adhere
B Screwing on
| 
---|---
Set-up system
A Homematic IP Access Point (Cloud)
B Central Control Unit 
Detailed manuals for
Homematic IP App
|
WebUI Software
---|---
|
https://homematic-ip.com/sites/default/files/downloads/homematic-ip-
anwenderhandbuch.pdf| https://homematic-
ip.com/sites/default/files/downloads/WebUI_Handbuch_eQ-3.pdf
Function
This device is part of the Homematic IP smart home system and works with the
Homematic IP radio protocol. All devices of the Homematic IP system can be
configured comfortably and individually with a smartphone via the Homematic IP
app. Alternatively, you have the option of operating Homematic IP devices via
the CCU2/CCU3 or in conjunction with many partner solutions.
The available functions provided by the system in combination with other
components are described in the Homematic IP User Guide.
The Homematic IP Window / Door Contact reliably detects open windows and doors
by an integrated magnet sensor. The device can be easily mounted thanks to the
supplied adhesive strips or screws.
You can directly connect the window and door contact to the Homematic IP
Radiator Thermostat – basic to automatically lower the room temperature during
ventilation.
Alternatively, you can use the device in conjunction with a Homematic IP
Access Point and integrate them comfortably into the Homematic IP smart home
system via the free smartphone app and use it with comprehensive climate
control and security applications. Open windows and doors are immediately
displayed in the Homematic IP app – even while being out and about you can
keep a close eye to your windows and doors.
All current technical documents and updates are provided at www.homematic-
ip.com.
Notes on operation
** Observe the correct polarity of the batteries. Caution!
There is a risk of explosion if the battery is not replaced correctly. Replace
only with the same or equivalent type.
Never recharge non-rechargeable batteries. Do not throw the batteries into a
fire. Do not expose batteries to excessive heat. Do not short-circuit
batteries.
Declaration of conformity**
eQ-3 AG, Maiburger Straße 29, 26789 Leer, Germany hereby declares that the
radio equipment type Homematic IP HMIP-SWDM is compliant with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at
www.homematic-ip.com
Restore factory settings
When the factory settings are restored, all settings are lost.
| 
---|---
Technical specifications
| Device short name | HmIP-SWDM |
|---|---|
| Supply voltage | 2x 1,5 V LR03/Micro/AAA |
| Current consumption (max.) | 35 mA |
| Battery life in years (type) | 4 |
| Degree of protection | IP20 |
| Ambient temperature | -10 to +50 °C |
| Dimensions electronic unit (W x H x D) | 102 x 18 x 25 mm |
| Dimensions magnet contact (W x H x D) | 48 x 11 x 13 mm |
| Weight electronic unit (including batteries) | 46 g |
| Weight magnetic contact (including magnet) | 17 g |
| Radio frequency band | 869,4-869,65 MHz |
| Receiver category | SRD category 2 |
| Maximum radiated power | 10 dBm |
| Typ. open area RF range | 200 m |
| Duty cycle | < 1 % per h/< 10 % per h |
Subject to technical changes
HmIP-SWDM // 154601 // V1.2 (12/2021)
Documentation © 2019 eQ-3 AG, Germany
All rights and changes reserved. Printed in Hong Kong.
Bevollmächtigter des Herstellers:
Manufacturer’s authorised representative:
Mandataire du fabricant : eQ-3 AG
Maiburger Straße 29
26789 Leer/Germany
www.eQ-3.de