Homematic IP BMOAONSUT Radiator Thermostat User Manual

June 2, 2024
Homematic IP

Homematic IP BMOAONSUT Radiator Thermostat User Manual

Homematic IP BMOAONSUT Radiator Thermostat

FIG 1.JPG

HmIP-eTRV-E-S // 156536 // V1.2 (01/2023)
Documentation © 2021 eQ-3 AG, Germany
All rights and changes reserved. Printed in Hong Kong.

Please read these instructions carefully and retain them for future use.

Attention! Warning

At your own risk.

  Important complementary information .

Observe the safety instructions on the attached sheet “Safety instructions and general information”.

Detailed manuals for…

FIG 3.JPG

Overview of the device

A Metal nut
B Pantalla LCD
C (Cap of) battery compartment
D System button (connection button and LED)

E Regulation of the temperature with a slight turn (from right to left)

FIG 4 Overview of the device.JPG

FIG 5 Overview of the device.JPG

FIG 6 Overview of the device.JPG

FIG 7 Overview of the device

FIG 8 Overview of the device.JPG

Establish the connection of the device with:

A Homematic IP Access Point (Cloud)
B Central

FIG 9 Establish the connection of the device.JPG

FIG 10 Establish the connection of the device.JPG

FIG 11 Establish the connection of the device.JPG

Tip: For easier assembly (after removing the batteries) press a button in the battery compartment while tightening the metal nut on the vent valve.

Optional: to facilitate assembly, you can press a button in the battery compartment (after they have been removed) while the metal nut is screwed onto the radiator valve.

Optional: for easier installation (after removing the batteries), press a button in the battery compartment while screwing the metal nut onto the radiator valve.

FIG 12.JPG

If the thermostat moves, replace the attached support ring.
Use the support ring supplied if the radiator thermostat does not remain securely in place.
Use the supplied support ring as the radiator thermostat you zit them.

FIG 13.JPG

Adaptation movement

FIG 14.JPG

If the screen backlight is off, press button (D) a second time to start the adaptation movement.

Rotate the panel 180° // Rotate the display orientation

Press the system button (D) and the temperature regulator (E) at the same time in the direction in which the screen should rotate.

Press the system key (D) and at the same time rotate the temperature regulator (E) in the direction in which you want to rotate the display.

Press the system button (D) and at the same time turn the temperature controller (E) in the direction you want the display to go turn.

FIG 15.JPG

System configuration

A Homematic IP Access Point (Cloud)
B Central

FIG 16 System configuration.JPG

FIG 17 System configuration.JPG

Functioning

This device is part of the Homematic IP Smart Home system and communicates with the Homematic IP radio protocol.
All system devices can be conveniently and individually configured with your smartphone via the Homematic IP app. Alternatively, there is the possibility of managing Homematic IP devices through the central CCU3 or in connection with combined solutions with other brands. In the Homematic IP user manual you will find the functions compatible with other components of the system.

With Homematic IP Radiator Thermostat you can regulate the room temperature of your smart home by the hour using the Homematic IP smartphone application depending on your needs. Individual temperature options can be conveniently configured via the app – with up to 3 configurable heating profiles and 13 variations per day. Alternatively, you can regulate the temperature intuitively on the device itself. With the additional Boost function you can heat the radiator quickly in a short time by opening the valve to the maximum.

Thanks to the adjustable display and the modern design of the housing, the radiator thermostat is suitable for any location in the house.

Open doors and windows are identified with the open window detector and, more precisely, with Homematic IP Contact for windows and doors. The room temperature automatically lowers so that energy is not wasted. When you close the windows, the comfort temperature is automatically restored.

The radiator thermostat is compatible with all common radiator valves and is very easy to install. To do this, it is not necessary to empty the water from the radiator or modify anything in the heating system. You will find all technical documents and updates and information on valve adapters at www .homematic-ip.com.

Instructions on operation

Please note that the regulation of the room temperature with the radiator thermostat in a twin-tube heating system has one supply and return pipe per radiator. If single-tube heating systems are used, strong variations in the set temperature can occur due to fluctuations in the supply temperature.

If you detect damage to the existing thermostat, valve or heating pipes, contact a heating expert.

Caution! Danger of explosion if batteries are incorrectly replaced. Only change with batteries of the same or equivalent type. Batteries cannot be never recharged. Do not throw batteries into fire. Do not expose batteries to excessive heat. Do not short circuit the batteries. There is a danger of explosion!

Caution! When handling spent batteries, avoid contact with skin and eyes! Use appropriate gloves when removing dead batteries and debris from a device! If it comes into contact with the skin, rinse with plenty of water!

Declaration of conformity

Q-3 AG, Maiburger Str. 29, 26789 Leer, Germany, declares that the Homematic IP radio installation type HmIP-eTRV-ES complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available in full on the website: www.homematic-ip.com

Technical data

FIG 18 Technical data.JPG

Mounting on the Danfoss valve with adapter

Produced to improve the seat with pretension. To assemble, use a screwdriver and bend it slightly in the screw area.

Be careful not to get your fingers caught between the adapter halves!

The RA and RAV adapters have been produced to optimize installation with preliminary fixing. When assembling, use a screwdriver if necessary and bend it slightly in the screw area.

Be careful not to pinch your fingers between the two halves of the adapter!

For a better fit, the RA and RAV adapters are produced with pre-tension. When installing, you can use a screwdriver and bend the adapter slightly open on the screw.

Be careful not to trap your fingers between the adapter halves!

Manufacturer’s representative:

Manufacturer Authorized Representative:

Authorized representative of the manufacturer:

eQ-3 AG

Maiburger Straße 29

26789 Leer/Germany

www.eQ-3.de

Subject to technical changes.

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Homematic IP User Manuals

Related Manuals