homematic IP 4 A-1 Wall Switch User Guide
- June 1, 2024
- Homematic IP
Table of Contents
homematic IP 4 A-1 Wall Switch
Specifications
- Device short name: B Taster
- Supply voltage: Not specified
- Current consumption (max.): Not specified
- Battery life in years (type): Not specified
- Degree of protection: Not specified
- Ambient temperature: Not specified
- Dimensions (W x H x D):
- Without frame: Not specified
- Including frame: Not specified
- Weight (including batteries): Not specified
- Radio frequency: Not specified
- Receiver category: Not specified
- Maximum radiated power: Not specified
- Typical open area RF range: Not specified
- Duty cycle: Not specified
Product Usage Instructions
Mounting Instructions
- Ensure the selection of the installation location considering the electrical wiring and power supply cables.
- Follow the notes for mounting on a flush-mounted box if applicable.
Safety Instructions
- If changes or works need to be done on the house installation or low-voltage distribution, ensure only persons with relevant electro-technical knowledge and experience perform the installation.
Declaration of Conformity
Mandataire du fabricant: www.eQ-3.de
FAQ
-
Q: What is the recommended battery type for the B Taster?
A: The recommended battery type for the B Taster is not specified in the user manual. -
Q: What is the radio frequency range of the device?
A: The radio frequency range of the device is not specified in the user manual. -
Q: Can the B Taster be used with other smart home systems?
A: The compatibility of the B Taster with other smart home systems is not mentioned in the user manual.
Homematic IP Wall-mount Remote Control – 2-button
Installation and brief instructions
Proceed to the detailed manual
HMIP-WRC2-A // 159887 // V1.0 (05/2023) Documentation © 2023 eQ-3 AG, Germany
All rights and changes reserved. Printed in Hong Kong.
Read the manual carefully and keep it in a safe place.
Attention! This indicates a hazard.
Additional important information.
Detailed manuals for.
Homematic IP App //Appli Homematic IP
WebUI Software // Logiciel WebUI
Device overview
- A Clip-on frame
- B Push-button (electronic unit)
- C Channel 1
- D System button (teach-in button and LED)
- E Channel 2
- F Mounting plate
Connect device to
- A Homematic IP Access Point (Cloud)
Central
Control Unit
*Teach-in HmIP device
Mounting the remote control
- A Adhere – with supplied clip-on frame
- B Screwing on – with supplied interchangeable frame
- C Flush-mounted box
- D (Multi-gang) frame of other manufacturers
Set-up system
A Homematic IP Access Point (Cloud)
B Central Control Unit 
Function
This device is part of the Homematic IP smart home system and works with the
Homematic IP radio protocol. All devices of the Homematic IP system can be
configured comfortably and individually with a smartphone via the Homematic IP
app. Alternatively, you have the option of operating Homematic IP devices via
the CCU3 or in conjunction with many partner solutions. The available
functions provided by the system in combination with other components are
described in the Homematic IP User Guide.
The Homematic IP Wall-mount Remote Control – 2 buttons is a flexible push-
button for wall mounting with two channels for central control of Homematic IP
devices and functions. At the push of a button, the eco mode for the heating
system is activated or lights are switched on and off.
Thanks to battery operation, the device is highly flexible where mounting and
selecting a mounting location are concerned. The device is mounted and removed
very easily with the supplied clip-on frame using screws or adhesive strips.
It is compatible with a number of different surfaces. It is also possible to
integrate the wall-mount remote control into existing switches of other
manufacturers.
All current technical documents and updates are provided at www.homematic-
ip.com.
When selecting the installation location, check for electrical wires and power supply cables.
Technical specifications
Values
- Device short name HMIP-WRC2-A
- Supply voltage 2x 1,5 V LR03/Micro/AAA
- Current consumption (max.) 50 mA
- Battery life in years (type) 4
- Degree of protection IP20
- Ambient temperature 5 bis 35 °C // 5 to 35 °C // 5 à 35 °C
- Dimensions (W x H x D)
- Without frame: 55 x 55 x 17 mm
- Including frame: 86 x 86 x 19 mm
- Weight (including batteries) 82 g
- Radio frequency 868,0-868,6 MHz/869,4-869,65 MHz // 868.0-868.6 MHz/869.4-869.65 MHz
- Receiver category SRD category 2 // SRD catégorie 2
- Maximum radiated power 10 dBm
- Typ. open area RF range 200 m
- Duty cycle < 1 % pro h / < 10 % pro h // < 1 % per h/< 10 % per h // < 1 % par h/< 10 % par h
Bevollmächtigter des Herstellers: Manufacturer’s authorised representative: Mandataire du fabricant :
eQ-3 AG
Maiburger Straße 29
26789 Leer/Germany
www.eQ-3.de