Zigbee 54AC54565A ID Lock 150 User Manual

ID Lock 150
Zigbee Module
User Manual

1: Place the module in the slot(A) marked “Remote Control” after removing batteries.

Preparation

• Update ID Lock 150 with the ”Updater app”.
  The Zigbee module is compatible with lock firmware from v1.5.0.
  See idlock.no/updater for more information.

Add lock

• Open the door.

•  Remove batteries.

•  Place the module in the slot marked “Remote Control” (see illustration 1).

•  Insert batteries.

• Activate “Add unit” in the app for your hub or scan the QR code.
  Please follow instructions from your hub manufacturer. Secure inclusion (QR code) may not be available on all hubs.

•  The module is added by itself.

A blue LED flashes when the module synchronizes and is added.
Sounds may be heard from the lock during the process.

Remove lock

• Open the door.
•  Hold the key button until the panel is activated.
• Enter [Master PIN], followed by [*].
•  Enter digit [2], followed by [*].
• Enter digit [0].

Manual sync

• Open the door.
• Hold the key button until the panel is activated.
•  Enter [Master PIN], followed by [*].
• Enter digit [2], followed by [*].
• Enter digit [5]

Technical details .

Please refer to the next page for technical details and properties for the Zigbee module.

Warning!

The batteries must be removed when removing and placing the module in the ID Lock 150. If not, the module can take damage.

Basic cluster (0x0000)
Attributes

Basic cluster (0x0000)
Manufacturer specific attributes

Power Configuration cluster (0x0001)
Attributes

Identity cluster (0x0003)
Attributes

Commands
0x00: Identify
0x01: IdentifyQuery

Door lock cluster (0x0101)
Manufacturer specific attributes

False: Master PIN unlock DISABLED
0x4001| RFID enabled| BOOLEAN (0x10)| True: RFID ENABLED False: RFID DISABLED
0x4002| Hinge
mode| BOOLEAN (0x10)| False: Right hinged door True: Left hinged door
0x4003| Service PIN
mode| INT8U (0x20)| 0: Deactivated (default)
1:lx use
2:2x uses
3:5x uses
4:10x uses
5:Random PIN lx use
6:Random PIN 24 hours
7:Always valid
8:12 hours
9:24 hours
0x4004| Lock mode| INT8U (0x20)| 0: Auto lock OFF/Away mode OFF
1:Auto lock ON/Away mode OFF
2:Auto lock OFF/Away mode ON
3:Auto lock ON/Away mode ON
0x4005| Relock enabled| BOOLEAN (0x10)| True: ReLock ON False: ReLock OFF
0x4006| Audio volume| INT8U (0x20)| 0: Volume off
1-5: Volume level 5: Default

Note! Service PIN mode 5 and 6 returns a random generated PIN and mode 1 or 9. Available from firmware 1.5.5.

Door lock cluster (0x0101)
Attributes

Ox1:locked
Ox2:unlocked Oxff: undefined
0x0001| Lock type| ENUM8 (0x30)| Ox00 (deadbolt)
0x0002| Actuator enabled| BOOLEAN (0x10)| False
0x0003| Door state| ENUM8 (0x30)| Ox00: open
Ox01: closed
0x02: error jammed
0x03: error forced open Chid*: error unspecified Oxff: undefined
0x0012| Num PIN users| INT16U (0x21)| 25
0x0013| Num RFID users| IN716U (0xl)| 25
0x0017| Max pin length| IN78U
(0x20)| 10
0x0018| Min pin length| IN78U
(0x20)| 4
0x0024| Sound volume| INT8U
(0x20)| 0x00: Silent 0x01: Low 0x02: High
0x0033| Require PIN for RF
operation| BOOLEAN (0x10)| 0xffff
0x0041| Keypad operation event mask| BITMAP16 (0x19)| 0xffff
0x0042| RF operation event mask| BITMAP16 (0x19)| 0xffff
0x0043| Manual operation event mask| BITMAP16 (0x19)| 0xffff
0x0044| RFID
operation event mask| BITMAP16 (0x19)| 0xffff
0x0045| Keypad programming event mask| BITMAP16 (0x19)| 0xffff
0x0046| RF programming event mask| BITMAP16 (0x19)| 0xffif
0x0047| RFID programming event mask| BITMAP16 (0x19)| 0xffif
0xfffd| Cluster revision| INT16U(0x21)| 1

Commands

0x00: Lock Door
0x01: Unlock Door
0x05: Set PIN
0x06: Get PIN
0x07: Clear PIN
0x08: Clear all PINs

Revision: 0.4
Approved date: 2020-11-24
Approved by: ALR
Language: English
idlock.no/zigbee

References

• ID Lock 150 Updater – ID Lock
• Zigbee – ID Lock
• ‎ID Lock 150 Updater on the App Store
• ID Lock 150 Updater - Apps on Google Play

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>