GLP X4 Concentric Ring Mounting Kit Installation Guide
- June 7, 2024
- GLP
Table of Contents
GLP X4 Concentric Ring Mounting Kit
Step-by-Step
- Unscrew the 3 Nylock nuts from the fixture.
- Install the standoff with the lock washer.
- Place the concentric ring on the fixture, lining up the mounting holes with the standoffs. Attach the concentric ring with a lock washer and screw.
Specifications
| Component | Description |
|---|---|
| Fixture | Base unit to which the mounting kit is attached |
| Nylock nuts | Nuts with a nylon insert to prevent loosening |
| Standoff | A separator that creates space between components |
| Lock washer | A washer designed to prevent the nut from turning |
| Concentric ring | A ring placed on the fixture for mounting |
| Screw | A fastener used to secure the concentric ring |
Visual Descriptions of Components
The images depict various stages of the installation process for the GLP X4 Concentric Ring Mounting Kit. Key components and actions are highlighted:
- An overhead view of the fixture, showing the concentric ring with highlighted mounting holes.
- A side view of the fixture illustrating the alignment of the concentric ring with the standoffs.
- A detailed view of the fixture’s side, where a hand is shown installing the standoff with the lock washer.
- The fixture from an angle, showing the concentric ring secured with lock washers and screws.
Old Style Reference
This document is for the new style of the 6375 GLP X4 Concentric Ring Mounting Kit, which installs without a diffuser, unlike the old style.
FAQ
Do I need a diffuser to install the 6375 GLP X4 Concentric Ring Mounting Kit?
No, the new style is designed to be installed without a diffuser.
What is the purpose of the Nylock nuts?
The Nylock nuts are used to secure components in place, preventing them from loosening due to vibration or movement.
How many standoffs are required for installation?
The installation requires the use of standoffs as separators between the fixture and the concentric ring. The exact number is not specified in the provided content.
Can the concentric ring be attached without the lock washer?
It is recommended to use the lock washer when attaching the concentric ring to ensure a secure and stable installation.
© CITY THEATRICAL 2024