intelbras XFCT 1600 Splitter Installation Guide

intelbras XFCT 1600 Splitter Installation

Care and Safety

• Read the installation guide: all safety and handling instructions should be read before starting operations with the product and should be kept for future reference.
• Safety in transport and handling: high pressure or violent vibrations are not allowed during transport, storage, or use.
• Technical assistance: do not attempt to repair this product. Let all services be done by our authorized service network.
• Heed the warnings: follow all the instructions indicated in the guide.
• LGPD – General Law of Personal Data Protection: Intelbras does not access, transfer, capture, or perform any other type of personal data processing resulting from this product.

Product

Description
The Intelbras Optical Termination Box (OTB) is used as the termination point of the backbone cable to connect with the drop cable to the network of FFTX communication systems. In the OTB, fiber splicing, splitting and distribution can be done, providing adequate protection and accommodation for FTTX network construction. With its completely closed structure made of PC+ABS, the Intelbras OTB provides protection against humidity, dust, aging, and water, with an IP 55 ingress protection rating.
Dimensions

XFCT Box Details

Accessories

Installation

XFCT box mounting

Splitter arrangement (applies only to model XFCT 1600)

1. Open the box, remove the OTB installation accessory kit, and the protective plastics, and fit the adapters1 into the slots (item 6):
2. On the rear face of the tray, fit the splitter2 into the PLC splitter holder (item 14) and arrange a fiber loop at the bottom of the tray rear face:
3. After settling in the bottom of the tray, pass the splitter connectors through the passage, transferring them to the front face of the tray, as shown in the image below:
4. If necessary, place the rest of the splitter fibers in the front of the tray, place the plastic cover and fit the splitter connectors to the adapters, previously installed:

Main Cable Arrangement

1. Remove the protective cap from the cable entry and insert the optical cable:
2. For a better fixation of the cable inside the box it is necessary to increase the diameter of the cable with the help of an insulating tape or similar.
3. Tighten the protective cap on the cable:
4. If uncut cable is required, the optical cable’s input part must be replaced. To do this, detach the optical cable entry piece with the help of a pair of pliers, as shown in the first picture below. Then fit the uncut cable entry piece (item F in the accessory list) and tighten it with the supplied screw (item G in the accessory list):
5. Tighten the metal clamp inside the box:
6. Tighten the anti-torsion lock and cut the rest of the support element:
7. Strip the loose tube that will be used and insert the fibers into the conduction hose. Attach the hose to the OTB as shown in the picture:
8. After installing the hose, put a plastic tie to secure it to the OTB:
9. Strip the fiber that will be used, fuse it to the fiber in the splitter entrance, and then place the core in the fixing grooves:
10. Use the core protector that is supplied with the box to ensure that the core is properly seated in the fixing grooves. Place the remaining fibers on top of the back side of the tray and place the protective cover on:

Connecting the Drop cable to the XFCT box

1. Remove a rubber cap intended for the Drop cable outlet and insert the Drop cable into the port, crossing the rubber seal:
2.  Assemble the field connector and plug it into an OTB adapter:
3. Arrange the drop cable in the tray, fixing it with the plastic tie if necessary:
4. Seal properly by positioning the rubber correctly in the box.

Wall Installation

1. Drill four holes in the wall according to the measurements presented in item 2.2.-Dimensions in this guide.
2. Position the box so that the holes match and use the screws to secure it.

Installation on a pole

1. Using two stainless steel straps, attach the box to the post using the pass-through slots located on the back of the box, as shown in the figure below:

Warranty Terms

It is hereby expressly stated that this contractual warranty is conferred under the following conditions:

1. All parts, pieces and components of the product are guaranteed against eventual manufacturing defects, which they may eventually present, for a period of 1 (one) year – this being 90 (ninety) days of legal guarantee and 9 (nine) months of contractual guarantee -, as from the date of purchase of the product by the Consumer, as shown on the invoice for the purchase of the product, which is an integral part of this Term throughout the entire national territory. This contractual warranty includes the free replacement of parts, pieces, and components that present manufacturing defects, including the expenses for the labor used in this repair. If no manufacturing defect is found, but defect(s) arising from improper use, the Consumer will bear these expenses.
2. The product´s installation should be done according to the Product Manual and/or Installation Guide. If your product requires installation and configuration by a qualified technician, look for a competent and specialized professional, considering that the costs for these services are not included in the product’s price.
3. Once the defect is confirmed, the Consumer must immediately contact the nearest Authorized Service listed by the manufacturer – only these are authorized to examine and repair the defect during the warranty period foreseen herein. If this is not done, this warranty will be void, since it will be characterized as a violation of the product.
4. In the event that the Consumer requests home assistance, he or she must go to the nearest Authorized Service to inquire about the technical visit fee. If it is necessary to remove the product, the resulting expenses, such as transportation and security costs to and from of the product, will be the Consumer´s responsibility.
5. The warranty will totally lose its validity in the occurrence of any of the following hypotheses: a) if the defect is not of manufacturing, but caused by the Consumer or by third parties not related to the manufacturer; b) if the damage to the product comes from accidents, disasters, nature agents (lightning, flooding, landslides, etc.), humidity, voltage in the electrical network (overvoltage caused by accidents or excessive fluctuations in the network), installation/use in disagreement with the user’s manual or resulting from the natural wear and tear of the parts and components; c) if the product has suffered chemical, electromagnetic, electrical or animal (insects, etc.) influence; d) if the product’s serial number has been tampered with or scraped; e) if the device has been breached.
6. This warranty does not cover data loss, therefore it is recommended, if applicable to the product, that the Consumer make a backup copy of the data on the product on a regular basis.
7. Intelbras is not responsible for the installation of this product, nor for any attempts of fraud and/or sabotage on its products. Keep the software updates and applications used up-to-date, if relevant, as well as the network protections required for protection against intrusions (hackers). The equipment is guaranteed against vices within its normal conditions of use, and it is important to be aware that, because it is an electronic equipment, it is not free of frauds and scams that may interfere with its correct operation.
8. Ater its useful lifespan, the product must be delivered to an Intelbras authorized service center or directly disposed of in an environmentally appropriate manner, avoiding environmental and health impacts. If you prefer, the battery as well as other Intelbras brand electronics without use, can be discarded at any Green Eletron collection point (manager of electro-electronic waste with whom we are associated). If you have any questions about the reverse logistics process, please contact us by phone
   (48) 2106-0006 or 0800 704 2767 (Monday to Friday from 8am to 8pm and on Saturdays from 8am to 6pm) or by e-mail suporte@intelbras.com.br.

These being the conditions of this supplemental warranty term, Intelbras S/A reserves the right to alter the general, technical and aesthetic characteristics of its products without prior notice.
The manufacturing process of this product is not covered by the requirements of ISO 14001.
All images in this manual are illustrative.

Customer Support: (48) 2106 0006
Forum: forum.intelbras.com.br
Support via chat: intelbras.com.br/suporte-tecnico
Support via e-mail: suporte@intelbras.com.br
Customer Service: 0800 7042767
Where to buy? Who installs?: 0800 7245115
Imported in Brazil by: Intelbras S/A – Indústria de Telecomunicação Eletrônica Brasileira Rodovia SC 281, km 4,5 – Sertão do Maruim – São José/SC – 88122-001
CNPJ 82.901.000/0014-41 – www.intelbras.com.br

References

• Fórum Intelbras - Índice
• intelbras.com.br/suporte-tecnico

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>