Sygonix Heating Thermostat with WiFi and Sensor Instruction Manual

: June 6, 2024
: Sygonix

Sygonix Heating Thermostat with WiFi and Sensor Instruction Manual

2250410

Introduction

The connected device works through a Wi-Fi network together with the “Smart Life – Smart Living” app. This mobile app allows you to control, manage, and receive alerts on devices connected to your network.

General Information

Important Information

Observe information in a red frame to avoid harming yourself or others, and prevent product damage.

Give information in an orange frame special attention.

The blue frame provides tips on product use and features.

Conrad Connect

Your product is compatible with the Conrad Connect IoT platform and is powered by Tuya. Device integration with Conrad Connect requires a Conrad Connect Account.
You can set up an account at the following URL: www.conradconnect.com

Legal Notice

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.

Requirements

Security

It is strongly recommended that you set up your Wi-Fi Router/Wi-Fi Access Point (AP) to use the most secure encryption option it supports.

App to Device Connection

To add a new device to the app, the mobile device that runs the app and the smart device must be connected to the same WiFi network.
You can control the smart device through the app via Wi-Fi or using mobile device data.

Safety

Remind yourself of the possible dangers the device you intend to connect can pose to your environment.

Read the instruction manual that came with the product you are going to connect to the smart device to find out if it is suitable to be operated without attendance.

If it is not, then do not use it in conjuction with timer and schedules.

A heater can cause fire if left unattended!
A kettle that contains no water may cause fire!
A coffee maker may overheat if not turned off on time and cause fire!

Mobile App

Please note that the following instructions may change for future app versions.

Getting Started

First time users should follow these steps:

Download and Install the App.
Create a User Account.
Log In.
Add Device.

Download and Install the App

App Installation

Apps are available for Android and iOS mobile devices.

Visit the respective app store and search for “Smart Life – Smart Living”, or scan the QR code shown here.

Make sure your mobile device satisfies the minimum requirements as outlined on the app store download page.

Home Page

The home page lists all devices that are under your account’s control. When you log in for the first time, the device list will be blank.

Swipe down from the top of the screen to refresh the page.

A1 Access to “Home Management” settings, where you can name a home, set the home location on a map, and assign/add new devices to each room.
A2 Enter a room to view or add devices.
A3 View all devices at once.
A4 Adds a new device; identical with A14
A5 Return to “Home Page” view
A6 Access “Tap-to-Run” and “Automation”.
A7 Access your profile and settings.
A8 Manage your rooms and assigned devices.
A9 Remove one or all devices.
A10 Switch between list and grid view,
A11 Access submenus, see items A8, A9 and A10
A12 Displays location information such as current temperature, humidity, air pressure and wind speed.
A13 Voice control.
A14 Adds a new device; identical with A4.

User Account

Your account settings are stored in the cloud.

Create a User Account

A user account is required for you to operate the device.

Select Register to create an account.
Log In.
You will then be taken to the “Home Page”.

Add Device

Familiarize yourself with the product before setting it up. Refer to the product operating instructions for further information.

Connect your mobile device to a Wi-Fi network.
Add a device by selecting Add Device or the icon.
Select Small Home Appliances → Thermostat.
Follow the onscreen instructions to complete the setup process.

Overview

App Overview

B1 Active mode
B2 Current temperature
B3 Decrease temperature
B4 Flame icon ( ) shows when heating has been triggered.
B5 Mode Select: Manual, Program, Holiday
B6 Power ON/OFF
B7 App settings
B8 Increase temperature
B9 Keypad lock ON/OFF
B10 Thermostat settings

App settings

Change Device Name

From the “overview” screen select > .
Enter a new device name.

Connect with Amazon Alexa or Google Assistant

From the “overview” select .
Select an option under “Third-party Control”.
Follow the onscreen instructions to complete the setup process.

Device Sharing

To share access to a device e.g. with a family member:

From the “Overview” screen select > Share Device.
Follow the onscreen instructions.

Remove Device

You must remove the device before it can be used with a new account you have not “shared” with. E.g. If giving it to a third party.

From the “Overview” screen select Note Icon > Remove Device.

Offline Notification

Receive a notification if your device goes offline.
From the “Overview” screen select Note Icon > Offline Notification > toggle on/off.

Create Groups

Devices under the same group can be controlled all at once.

From the “Overview” screen select > Create Group.
Follow the onscreen instructions.

Push Notifications

To receive notifications, notifications should be enabled in the app and in your mobile device notification settings.

From the “Home Page” view select Me > Settings > App Notification.
Set your notification settings as required.

FAQ

Visit a list of frequently asked questions here: From the “Overview” screen select Note Icon > FAQ & Feedback.

Device settings

To access device settings, select the icon from the “overview” screen.

Enter the following password when prompted: 123456

Application device settings are the same as the ones that can be adjusted directly on the thermostat.
The table shows application settings alongside equivalent thermostat settings.
Refer to the hardware manual for further information about each setting.

Application

|

Thermostat

---|---
Temperature Setting|

BN

Temperature Calibration|

A1

HighTemp Protection|

AA

LowTemp Protection|

A9

Int Sensor Deadzone|

A2

Ext Sensor Deadzone
Device State On Power|

A4

Max Temperature Limit|

A8

Min. Temperature Limit|

A7

Program Type|

A6

Weekly program setting|

Weekly schedule program

Troubleshooting

App cannot connect to device

This may be due to a weak Wi-Fi signal or an interrupted connection.

Check that your internet connection is working correctly. Check cables, routers and connections. Restart network devices if necessary.
Check that the device is within range of your Wi-Fi access point. Use of other 2.4 GHz products e.g. wireless networks and microwave ovens may cause interference.
You may need to set up a wireless repeater to improve the connection.
If the device is battery powered, it may need to have the batteries replaced.