PHILIPS CED780 User Guide
- June 6, 2024
- Philips
Table of Contents
PHILIPS CED780
Register your product and get support at
www.philips.com/welcome
CED780
EN User manual
3
ES-AR Manual del usuario 41
PT-BR Manual do Usuário 87
English
Contents
1 Important
5
Safety
5
Notice
5
2 Your in-car entertainment system 7
Introduction
7
What’s in the box
8
Overview of the main unit
9
Overview of the remote control
10
3 Get started
12
Install the car audio
12
Mount into the dashboard
15
Attach the front panel
16
Install remote control battery
16
Turn on
17
Set date and time
17
4 Play audio/video/picture
18
Load discs
18
Connect USB device
19
Insert SD/MMC card
19
Play/Pause
20
Browse
20
Skip to a chapter/title/time
20
Select audio track
21
Select subtitle language
21
Change view angle
21
Repeat one/all chapter
21
Random play
22
Select audio mode
22
View photo
22
5 Listen to radio
23
Tune to a radio station
23
Store radio stations in memory
23
Tune to a preset station
24
6 Use navigation system
24
Insert map card
24
Use map
24
7 Play with Bluetooth device
25
Adjust microphone position
25
Pair the Bluetooth-enabled devices
25
Make a call
27
Receive call
27
Bluetooth phone book settings
28
Favorite call
28
Adjust Bluetooth settings
28
Listen to music from Bluetooth device 29
8 Play iPod
29
Compatible iPod/iPhone/iPad
29
Listen to the iPod/iPhone/iPad
30
Search for a track
30
Charge the iPod/iPhone/iPad
30
9 Adjust sound
31
Adjust volume
31
Mute
31
Select preset equalizer
31
Adjust fader/balance/subwoofer
31
Switch music listening zone
32
Turn FullSound on/off
32
Turn MAX sound on/off
32
Turn DBB on/off
32
10 Adjust settings
33
Display system setup menu
33
Adjust general settings
33
View Info settings
33
Adjust Navigation settings
34
Adjust Bluetooth settings
34
11 Others
35
Adjust brightness
35
Set rear view camera
35
Adjust display design
35
Listen to other devices
35
Detach the front panel
36
Reset
36
Replace fuse
37
EN 3
12 Product information
37
USB playability information
38
13 Troubleshooting
39
About the Bluetooth device
39
4 EN
1 Important
Safety
Read and understand all instructions before you use the device. If damage is
caused by failure to follow instructions, the warranty does not apply.
Use of controls or adjustments or performance of procedures other than herein
may result in hazardous radiation exposure or other unsafe operation.
The device is designed for negative ground (earth) 12 V DC operation only.
7R UHGXFH WKH ULVN RI WUDIÀF DFFLGHQWV GR not watch video when driving.
To ensure safe driving, adjust the volume to a safe and comfortable level.
Improper fuses can cause damage or ÀUH:KHQ RX QHHG WR FKDQJH WKH IXVH consult
a professional.
Use only the supplied mounting hardware for a safe and secure installation.
To avoid short circuits, do not expose the device, remote control or remote
control batteries to rain or water.
The device shall not be exposed to dripping or splashing.
Do not place any sources of danger on WKH GHYLFH HJ OLTXLG ÀOOHG REMHFWV
OLJKWHG candles).
Never insert objects into the ventilation slots or other openings on the
device.
Never place any objects other than discs into the disc tray/slot.
To avoid exposure to laser radiation, do not disassemble the device.
Risk of damage to the screen! Never touch, push, rub or strike the screen with
any object.
Never use solvents such as benzene, thinner, cleaners available commercially,
or anti-static sprays intended for discs.
Clean the device with soft, damp cloth. Never use substances such as alcohol,
chemicals or household cleaners on the device.
Notice
The making of unauthorized copies of copyprotected material, including
computer SURJUDPV ÀOHV EURDGFDVWV DQG VRXQG recordings, may be an infringement
of copyrights and constitute a criminal offence. This equipment should not be
used for such purposes. The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Philips
is under license.
Windows Media and the Windows logo are trademarks, or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has
been GHVLJQHG WR FRQQHFW VSHFLÀFDOO WR L3RG RU L3KRQH UHVSHFWLYHO DQG KDV EHHQ
FHUWLÀHG E the developer to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this accessory with iPod or
iPhone may affect wireless performance. iPod and iPhone are trademarks of
Apple Inc., registered in the U.S. and other countries.
EN 5
English
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary RI 5RYL &RUSRUDWLRQ7KLV LV DQ RIÀFLDO ‘LY; &HUWLÀHG® device that plays DivX video.Visit divx.com for more information and software WRROV WR FRQYHUW RXU ÀOHV LQWR ‘LY; YLGHRV ABOUT DIVX VIDEO-ON-DEMAND:This ‘LY; &HUWLÀHG® device must be registered in order to play purchased DivX Video- onDemand (VOD) movies.To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX® ‘LY; &HUWLÀHG® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
Your system consists of materials which can be recycled and reused if
disassembled by a specialized company. Please observe the local regulations
regarding the disposal of packaging materials, exhausted batteries and old
equipment.
Recycling
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused. When you see the crossed-out
wheel bin symbol attached to a product, it means the product is covered by the
European Directive 2002/96/EC:
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories. Other trademarks and trade names
are those of their respective owners. This apparatus includes this label:
Environmental information All unnecessary packaging has been omitted. We have
tried to make the packaging easy to separate into three materials: cardboard
(box), polystyrene foam (buffer) and polyethylene (bags, protective foam
sheet.)
Never dispose of your product with other household waste. Please inform
yourself about the local rules on the separate collection of electrical and
electronic products.The correct disposal of your old product helps prevent
potentially negative consequences on the environment and human health. Your
product contains batteries covered by the European Directive 2006/66/EC, which
cannot be disposed of with normal household waste. Please inform yourself
about the local rules on separate collection of batteries.The correct disposal
of batteries helps prevent potentially negative consequences on the
environment and human health.
This product complies with the radio interference requirements of the European
Community.
6 EN
English
Disposal of your old product and batteries
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused. Never dispose of your product
with other household waste. Please inform yourself about the local rules on
the separate collection of electrical and electronic products and batteries.
The correct disposal of these products helps prevent potentially negative
consequences on the environment and human health. Your product contains
batteries, which cannot be disposed of with normal household waste. Please
inform yourself about the local rules on separate collection of batteries.The
correct disposal of batteries helps prevent potentially negative consequences
on the environment and human health. Please visit www.recycle.philips.com for
additional information on a recycling center in your area. $Q FKDQJHV RU
PRGLÀFDWLRQV PDGH WR WKLV device that are not expressly approved by Philips
Consumer Lifestyle may void the user’s authority to operate the equipment.
2011 © Koninklijke Philips Electronics N.V. All rights reserved. 6SHFLÀFDWLRQV
DUH VXEMHFW WR FKDQJH ZLWKRXW notice.Trademarks are the property of
Koninklijke Philips Electronics N.V. or their respective owners. Philips
reserves the right to change products at any time without being obliged to
adjust earlier supplies accordingly.
2 Your in-car entertainment system
Congratulations on your purchase, and ZHOFRPH WR 3KLOLSV 7R IXOO EHQHÀW IURP
WKH support that Philips offers, register your product at
www.philips.com/welcome.
Introduction
With the car entertainment system, you can Quickly found routine through the
navigation system
And you can also enjoy: Audio/video/JPEG pictures from
DVD,VCD or CD USB devices SD/SDHC/MMC cards iPod/iPhone External devices FM or
AM (MW) radio Audio from Bluetooth-enabled devices Besides, you can
make/receive phone calls with Bluetooth-enabled devices.
EN 7
What’s in the box
Check and identify the contents of your package:
a
b
c
d
f Audio and Video cable g Hexagon head screw h Screws
– M4x8mm (x4) i Remote control battery j Rubber cushion k User manual l Quick
start guide
e
f
g
h
i
j
k
l
a Main unit and front panel (with a sleeve) b Remote control c Trim plate d
Carrying case for front panel e ISO standard connector
8 EN
English
Overview of the main unit
ab c d
e
f
g
o nm
h i
j k
l
q
p
a OPEN Open/Close TFT screen.
b Press to answer or redial a call. Press and hold to transfer call.
c / Turn the unit on or off. &RQÀUP VHOHFWLRQ Mute or unmute sound. Rotate to
adjust volume.
d BAND Select tuner band.
e +/-PRESET Select preset radio station. Search for track/folder.
f DISP Adjust dimmer settings. Press and hold to turn off display.
g TILT Adjust position of the screen.
h Eject disc.
i NAVI Enter GPS navigation system or exit.
EN 9
j AV IN External audio/video socket.
k Unlock the panel.
l USB socket.
m SOURCE Select source.
n Press to terminate call.
o
/ Tune for radio station. Skip/search for track. Fast backward/forward playback.
p RESET Reset the unit when it hangs up.
q SD/SDHC/MMC card slot
Overview of the remote control
a
b
c
d
e
~
}
f
|
{
g
h
z
i
y
j
k
x
l
w
v
m
u
n
t
o
s
p
r
q
10 EN
a Turn the unit on or off.
b NAVI Enter GPS navigation system or exit.
c SOURCE Select source.
d Mute or unmute sound.
e BAND Select tuner band.
f VOLUME +/ Adjust volume.
g SUBTITLE Select DVD or DivX subtitle language.
h Turn maximizing sound on or off.
i DVD MENU Access DVD main menu.
j Turn full sound on or off.
k Return to previous menu or exit.
l DBB Turn Dynamic Bass Boost (DBB) sound on or off.
m EQ Access audio setting menu.
n Turn the screen blackout mode on or off.
o ZONE Switch music listening zone.
p Select video channel.
q Answer phone. Dial or redial number.
r Terminate call.
s Browse photos.
t Switch to music playing mode.
u / Skip to previous/next preset station. Skip to previous/next folder. Search
backward/forward for DVD video. Move cursor up/down.
v Start play or pause.
w OK &RQÀUP VHOHFWLRQ
x / Skip to previous/next track/chapter. Move cursor to left/right.
y View the clock.
z DVD AUDIO Select audio language or audio channel.
{ TOP MENU Return to top menu.
| TILT +/ Adjust position of the screen.
} Unlock the panel.
~ DISP Adjust dimmer settings. Press and hold to turn off display.
EN 11
English
3 Get started
Caution
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in sequence.
Install the car audio
These instructions are for a typical installation. However, if your car has
different requirements, make the corresponding adjustment. If you have any
questions regarding installation kits, consult your Philips car audio dealer.
Caution
This unit is designed for negative ground (earth) 12 V
DC operation only.
Always install this unit in the car dashboard. Other
locations can be dangerous as the rear of the unit heats up during use.
To avoid short-circuit: before you connect, ensure that
the ignition is off.
Ensure that you connect the yellow and red power
supply leads after all other leads are connected.
Ensure that all loose leads are insulated with electrical
tape.
Ensure that the leads do not get caught under screws
or in moving parts (e.g. seat rail).
Ensure that all ground (earth) leads are connected to a
common ground (earth) point.
Use only the supplied mounting hardware for a safe
and secure installation.
,PSURSHU IXVHV FDQ FDXVH GDPDJH RU ÀUH:KHQ RX
need to change the fuse, consult a professional.
Note on the power supply lead (yellow) When you connect other devices to this
system, ensure that the rating of the car circuit is higher than the total
fuse value of all the connected devices.
Notes on speaker connection Never connect speaker wires to the metal
body or chassis of the car. Never connect speaker wires with stripes
to one another.
Connect wires
Caution Ensure that all loose leads are insulated with electrical
tape.
1 Check the car’s wiring carefully, then
connect them to the supplied ISO wires.
Connector Connect to
1 Yellow wire The +12V car battery
which is live at all times.
2 Blue/White The electric antenna control
wire
lead or power supply lead
of the antenna booster. If
there is no electric antenna
or antenna booster, or
it is manually operated
telescopic antenna, it is
unnecessary to connect
this lead.
12 EN
English
Connector Connect to
3 Black wire A metal surface of the car. Connect the black ground (earth) lead
before connect the yellow and red power supply leads.
4 Red wire The +12V power terminal which is live in the accessory (ACC)
position of the ignition switch. If there is no accessory position, connect to
the +12V car battery terminal that is always live. Ensure that black ground
(earth) lead is connected to a metal VXUIDFH RI WKH FDU ÀUVW
5 Green and Left speaker (Rear) green/black wires
6 White and Left speaker (Front) white/black wires
7 Gray and Right speaker (Front) gray/black wires
8 Purple and Right speaker (Rear) purple/ black wires
2 Connect the other end of the supplied
standard connector to the car audio system.
Caution
To avoid any accident, the driver must not watch video
while driving.This unit is designed to not allow watching moving video while
driving. Park your car in a safe place and engage the parking brake before
watching moving video.
Note
The video blocking system under parking brake not
engaged only control the display of this unit, and will not affect the video
output through the rear RCA video output.
If watch moving video from disc or AV-IN source but
parking brake is not properly connected, the video signal will be blocked by
the system, and the below display will be shown on TFT:
EN 13
23 22 21 20
8 15 7
2
6
3
4
14 EN
9 0!Ӥ$% & / 18
19
English
Connector/ Connect to/with Object
Mount into the dashboard
1
Pink wire Extension wire
2
2.5m
Parking brake (-)
Note
extension
wire (not
included)
3
Brake switch
Check wire connection before you mount the unit
into a car.
If preset radio stations are lost when the ignition key is
turned off and then turned on, reconnect the red leads
crosswise to the yellow ones.
4
Ground
5
Purple wire Reverse camera
1 If the car does not have an on-board drive
(B+)
or navigation computer, disconnect the
6
Gearbox
negative terminal of the car battery.
switch
If you disconnect the car battery in
7
Reverse gear Back lamp lead +
a car that has an on-board drive or
signal
navigation computer, the computer
8
ISO wires Connected in step
may lose its memory.
1 above
If the car battery is not disconnected,
9
Yellow cable Video out
to avoid short-circuit, ensure that the
10
Red cable Rear line out
(Right)
bare wires do not touch each other.
2 Ensure that car dashboard opening is
11
White cable Rear line out
within these measurements:
(Left)
12
Red cable Front line out
(Right)
5mm
13
White cable Front line out
(Left)
14
Red cable Audio in (Right)
15
White cable Audio in (Left)
183 mm
16
Yellow cable Video in
53mm
17
Brown cable Camera in
18
Blue cable Subwoofer
19
White wire OE remote
20
Black wire Radio antenna
21
Black wire External
microphone
22
Black wire TV ready/DAB
ready
23
Black wire GPS smart
antenna
Since the unit cannot be used if the slant angle of dashboard opening is above 20 degrees, ensure that the horizontal slant of the dashboard opening is between 0 and 20 degrees.
EN 15
3 When installing in a shallow space, change
the position of slide brackets.
Note
,I WKH XQLW LV À[HG E WKH VXSSOLHG VFUHZV LQVWHDG RI WKH
sleeve, skip this step.
4 Place the supplied rubber cushion over the
end of the mounting bolt.
Attach the front panel 1 Attach the trim plate.
5 Install the sleeve into the dashboard and
EHQG WKH WDEV RXWZDUGV WR À[ WKH VOHHYH Slide the unit into the dashboard
until you hear a click.
2 Insert the left side of the panel in the
chassis until it is correctly engaged.
3 Press the right side of the panel until the
mechanism locks it into place.
16 EN
Install remote control battery
Caution Risk of explosion! Keep battery away from heat,
VXQVKLQH RU ÀUH 1HYHU GLVFDUG EDWWHU LQ ÀUH
English
Note
5HPRYH EDWWHU LI LW LV ÁDW RU LI WKH UHPRWH FRQWURO ZLOO
not to be used for a long time.
Battery contain chemical substances. It should be
disposed of properly.
1 Open the battery compartment.
Set date and time 1 Tap to display main menu.
2 Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Turn on
Caution Risk of road accidents! Never watch videos or adjust
settings while you drive.
1 Press to turn the unit on. » The available OSD (On-Screen Display) languages
are displayed.
2 Tap to display the full menu. 3 Tap .
» The setup menu is displayed.
2 7DS D ODQJXDJH ZLWK ÀQJHUWLS » The OSD language is changed to the selected
language immediately.
To turn the unit off, press and hold for three seconds.
EN 17
4 Tap . » The date/time setup menu is displayed.
4 Play audio/ video/picture
5 Tap on [Date], [Clock Mode] or [Time]. 6 Tap or to set date/time. 7 When
date/time is set, tap to return to
main menu.
Load discs
You can play video, audio or images stored on the following discs: DVD video,
DVD-R, DVD-RW VCD Audio CD, CD-R, CD-RW
1 Insert the disc into the disc slot with label
side facing up. » The disc starts playing automatically.
18 EN
2 To remove the disc, press the button. » When the disc is ejected, the unit switches to the previous source, if connected. Otherwise, the unit switches to [Radio] mode automatically.
Note
Supported region code depends on where you bought
the car audio system.
Countries where you bought the unit China
Supported DVD region code
$VLD 3DFLÀF7DLZDQ Korea
English
Latin America Russia, India
Connect USB device
Note Ensure that the device contains playable content.
1 Push the USB socket cover upside. 2 Insert the USB device into the USB slot
.
» 7KH ÀOHV SOD DXWRPDWLFDOO
Insert SD/MMC card
Note
This device supports Secure Digital High Capacity
(SDHC) card.
1 Detach the front panel. (see ‘Detach the
front panel’ on page 36)
2 Insert the SD/MMC card into SD/MMC
card slot. » Play starts automatically.
3 To remove the USB device, switch the car
DXGLR VVWHP WR RWKHU VRXUFH ÀUVW WKHQ
take off the USB device. » When USB device is disconnected, it
plays the previous source.
Remove SD/MMC card
1 Switch to another source. 2 Press the card until you hear a click.
» The card is now disengaged.
3 Remove the SD or MMC card.
EN 19
Play/Pause
1 Once a disc, USB or SD/MMC card is
inserted, play starts automatically. For DVD movie, if a menu appears,
press to start play.
2 To pause, tap .
To resume play, tap again.
3 To skip forward/backward, tap or . 4 To fast forward/backward, tap and hold
or .
Browse
During play from USB device or SD card, you can browse through the listed
audio/video or SLFWXUH ÀOHV WR VHOHFW SUHIHUUHG ÀOH IRU OLVWHQLQJ or watching.
1 Tap to return to playlist menu. 2 Tap one of the icons below to select
IROGHUÀOH : to display all available audio folders/
tracks. : to display all available picture
IROGHUVÀOHV : to display all available video
IROGHUVÀOHV
3 Drag along the search bar to display the
alphabet pop-up.
4 5HOHDVH WKH ÀQJHU WR UHIUHVK WKH OLVW 5 Tap on the name to start play.
Skip to a chapter/title/time
1 During play, tap anywhere except for the
upper left corner to display the control bar.
2 Tap on the left lower corner of the
screen. » The second control bar is displayed.
20 EN
3 Tap . » The search screen is displayed.
Tip
You may also press SUBTITLE on the remote control
repeatedly to select subtitle language.
English
4 Tap the numbers to enter track number,
then tap [OK]. To clear the previous input, tap . To clear all input, tap .
Select audio track
For video discs that contain two or more audio tracks.
1 During play, tap anywhere except for the
upper left corner to display the control bar.
2 Tap repeatedly to select audio track. » The audio channel information is
displayed on upper line of the screen.
Tip You can also press DVD AUDIO on the remote
control repeatedly to change audio track.
Select subtitle language
For DVD or DivX discs that contain two or more subtitle languages.
1 During play, tap anywhere except for the
upper left corner to display the control bar.
2 Tap repeatedly to select a language. » The selected language is displayed.
Change view angle
Some DVDs contain alternate scenes, such as scenes recorded from different
camera angles. For such DVDs, you can select available alternate scenes. Press
TILT repeatedly on the front panel. » The view angle is changed.
Repeat one/all chapter
During play, you can select different repeat play modes. For DVD/VCD movie
disc:
1 Tap anywhere except for the upper left
corner to display the control bar.
2 Tap to display the second menu. 3 Tap to select:
[Rep: chapter]: play the current chapter repeatedly.
[Rep: title]: play all chapters in the title repeatedly.
[Rep: disc]: cancel repeat play.
For VCD karaoke: Tap to select: [Rep: one]: play the current track
repeatedly. [Rep: disc]: cancel repeat play.
)RU &’03:0$ DXGLR ÀOHV Tap on the upper line of the screen to select: : play
the current track repeatedly. : play all tracks in the current folder
repeatedly. : cancel repeat play.
EN 21
Random play
<RX FDQ SOD DXGLR WUDFNVÀOHV LQ UDQGRP RUGHU During play, tap repeatedly to
turn random play on or off. (red): start random play. (gray): cancel random
play.
3 Tap on a picture to view it in full screen.
Select audio mode
When you play VCDs, you can select an audio mode (R/L/Stereo).
1 During play, tap anywhere except for the
upper left corner to display the control bar.
2 Tap repeatedly until the preferred audio
mode is selected.
View photo
1 Tap . » Thumbnail view of the pictures is displayed.
Tip
You can also press on the remote control to view
picture list.
Zoom
You can zoom in pictures for a close view.
1 During view pictures, tap anywhere except
for the upper left corner to display the control bar.
2 Tap repeatedly to zoom in/out the
picture.
Rotate pictures
1 During view pictures, tap anywhere except
for the upper left corner to display the control bar.
2 Tap repeatedly to rotate the picture.
2 Drag the bar downward to view all
pictures.
22 EN
5 Listen to radio
[Local]: stations with strong and weak signals can be broadcast.
English
Tune to a radio station 1 Tap to display home menu. 2 Tap .
» Band and frequency information is displayed.
3 Tap FM or AM to select band:
FM band options: FM1, FM2, FM3 AM band options: AM1,AM2
4 %ULHÁ WDS or to tune to a radio
station by step. Tap or for over one second to
tune to a radio station automatically.
Tip You can also press BAND on the front panel or
remote control repeatedly to select the band.
Select radio range
Before you start to search for radio stations, you can select radio range.
1 Tap . 2 Tap [Radio Range] to toggle tuner
sensitivity from normal to high sensitivity. [Distance]: only stations with
strong
signals can be broadcast.
Store radio stations in memory
You can store up to 6 stations in each band.
Store stations manually
1 Select band. 2 Tune to the station by tapping or . 3 Tap and hold one of the
channels 1 to 6
over two seconds. » The station is saved under the selected
channel.
Store stations automatically
You can search for a station with intro search, which broadcasts a 10-second
preview of each detected radio station.
1 Select band. 2 Tap . 3 Tap [Auto Store].
» Auto search starts.The six strongest stations of the selected band are saved
in preset channels 1-6 automatically.
EN 23
Tune to a preset station
1 Select band. 2 Tap one of the preset channels (1 to 6) to
select a preset station.
6 Use navigation system
Insert map card
Note Navigation map card is not included in the packaging of
the car entertainment system.
1 Press OPEN to release the panel. 2 Open the card door under the screen. 3
Insert the map card into the map card slot.
24 EN
GPS Card
4 Close the card door. 5 Attach the front panel.
Tip You can press NAVI to enter/exit the navigation system.
Use map
Note You might need to upgrade the navigation map (sold
separately) before using it. See “Upgrade the map” section.
English
1 Tap to display main menu. 2 Tap .
» The navigation menu is displayed in a few seconds.
3 Refer to the user manual of the navigation
map to operate the navigation tool.
7 Play with Bluetooth device
You can make or receive phone calls with Bluetooth-enabled phones through the
unit. You can also listen to music from a Bluetoothenabled device.
Adjust microphone position
For better sound quality in make/receive phone call through Bluetooth, place
the microphone near the mouth.
1 Make sure the supplied microphone is
connected to the car audio system. (See “Connect wires” section).
2 Place the microphone at a proper location.
For example, Stick it onto the dashboard.
Or, clip it on the sun-shield.
Pair the Bluetooth-enabled devices
To connect your Bluetooth device to the unit, you need to pair the device to
the unit. Pairing needs only to be done once. You can pair up to eight
devices.
EN 25
Note The operational range between this unit and a
Bluetooth device is approximately 10 meters (30 feet).
Before you connect a Bluetooth device to this unit,
familiarize yourself with the Bluetooth capabilities of the device.
Compatibility with all Bluetooth devices is not
guaranteed.
Any obstacle between this unit and a Bluetooth device
can reduce the operational range.
Keep this unit away from any other electronic device
that may cause interference.
Pairing with unit
1 Tap to display home menu. 2 Tap .
» The setting menu is displayed.
3 Tap to display Bluetooth setting menu. 4 Tap [New Pairing] to search for
Bluetooth
device with your device.
5 Select the name of desired device in the
pairing list.
6 Enter default password “0000” in your
device. » If the pairing succeeds, the phone call
record is displayed.
Pairing with mobile phone
1 Open your mobile phone and switch on
Bluetooth.
2 Search for other Bluetooth device with
your device.
26 EN
3 Select “PH780” in the pairing list. 4 Enter default password “0000”.
» If the pairing succeeds, the dial screen is displayed.
Disconnect Bluetooth devices
1 Under dial screen/Bluetooth audio mode,
tap .
2 Tap [Paired Device]. » The Bluetooth/Paired device screen is displayed.
3 Tap on one device that you want to
reconnect/disconnect. Tap (green) to reconnect the
selected device. Tap (red) to disconnect the selected
device.
Tip If the Bluetooth device is paired, under disconnect
mode, tap on top of the screen into the Bluetooth/ paired device list.
If there is no Bluetooth device in the paired device list,
tap on top of the screen, [Paired list is empty] is displayed, you can tap to
search the device.
If you do not want to reconnect the device to the
unit automatically, under Setting menu, tap > [Auto Connect], then select
[Off]. For details, see “Adjust Bluetooth settings” section.
English
Make a call
You can make phone call with the unit under any mode.
Note Ensure that the phone is connected to the unit via
Bluetooth.
1 Tap on top of the screen. » The dial screen is displayed.
Receive call
By default, all incoming calls are received automatically.
Note You can select to receive calls manually by set [Auto
Answer] to [Off] status. For details, refer to “Adjust Bluetooth settings”.
1 If there is an incoming call, [Incoming
call…] is displayed on the screen.
2 Tap number icons directly to input phone
number. Tap to clear the last input. Tap to clear all input. Tap to go back to
previous screen.
3 Tap to start calling.
2 Tap (green) to answer/accept the call. 3 When conversation ends, tap (red)
to
terminate the call.
Tip
You can also press /
terminate the call.
on front panel to answer/
4 During talking, tap to display the keypad.
Switch phone call to mobile phone
If you do not want your passenger to hear your incoming call, you can switch
the call the mobile phone. During talking, tap . » The voice is transferred
from the
loudspeaker to the mobile phone.
EN 27
Tip
You can also press and hold on front panel to
transfer the call.
2 Tap to display the favorite call list.
Bluetooth phone book settings
The users are allowed to search and dial the number stored in the phone book.
1 Tap on top of the screen. » The dial screen is displayed.
2 Tap to display the phone book mode. » Tap [Sync] to synchronize phone book.
3 Tap on desired number to start calling.
Adjust Bluetooth settings 1 In the Bluetooth menu, tap .
» The option menu is displayed.
3 Search the number you want to dial, then
tap to start calling.
Tip You can enter desired name/number on the keypad to
search quickly.
[New Pairing]: pair the new device. [Paired Device]: display paired device.
[Display Design]: change the
background.
2 Tap an option to change the setting.
Favorite call
You can make a favorite call from the favorite call list.
1 Tap on top of screen. » The dial screen is displayed.
28 EN
English
Listen to music from Bluetooth device
If the connected Bluetooth device supports $GYDQFHG $XGLR ‘LVWULEXWLRQ 3URÀOH
$’3 you can listen to the music stored on the device through the unit. If the
device also supports $XGLR 9LGHR 5HPRWH &RQWURO 3URÀOH $95&3 SURÀOH RX FDQ XVH
WKH FRQWURO RQ WKH XQLW RU its remote control to play music stored on the
device.
1 Pair the phone with the unit. 2 Tap to return to home menu. 3 Tap . 4 The
Bluetooth menu is displayed.
Tap : switch to music mode. Tap : switch to dial screen mode. Tap : switch to
phone book.
8 Play iPod
Compatible iPod/iPhone/iPad
The car audio system supports below iPod/ iPhone/iPad models: Made for. iPod
touch (4th generation) iPod touch (3rd generation) iPod touch (2nd generation)
iPod touch (1st generation) iPod classic iPod nano (6th generation) iPod nano
(5th generation) iPod nano (4th generation) iPod nano (3rd generation) iPod
nano (2nd generation) iPod nano (1st generation)
Works with. iPhone 4 iPhone 3GS iPhone 3G iPhone iPad 2 iPad
EN 29
Listen to the iPod/iPhone/ iPad
Search for a track
During play from iPod/iPhone/iPad, you can VHDUFK WKURXJK WKH PXVLFYLGHR ÀOHV
WR VHOHFW SUHIHUUHG ÀOH IRU OLVWHQLQJZDWFKLQJ
1 During playing, tap . » Search list is displayed.
1 Connect your iPod/iPhone/iPad to the
front USB socket via Apple’s own 30pin USB cable. » Music playback starts.
2 To pause/resume play, tap . 3 To skip a track, tap / . 4 To fast
backward/forward, tap and hold
/ .
5 Tap repeatedly to toggle between two
control modes: iPod control mode: use buttons/touch
screen on iPod/iPhone/iPad to control the music. Unit control mode: tap screen
on car audio to control the music.
30 EN
2 Tap one of the icons below to select
IROGHUÀOH : to search a song. : to search a video.
3 Tap on the screen to select desired song/
movie.
4 Tap on the selected song/movie to play.
Charge the iPod/iPhone/iPad
When the iPod/iPhone/iPad is connected to the car audio system, the
iPod/iPhone/iPad begins to charge.
Tip
For certain iPod models, it may take up to one minute
before the charging indication is displayed.
English
9 Adjust sound
Adjust volume
Rotate clockwise/counterclockwise to increase/decrease the volume.
Mute
You can turn off the sound of your audio. During play, press / on front panel.
To resume sound, press / on front
panel again.
Select preset equalizer 1 Tap .
» The current equalizer setting is displayed.
3 Adjust EQ settings by tapping on the
screen. [Bass] bass range: -14 to +14. [Middle] middle range: -14 to +14.
[Treble] treble range: -14 to +14. [LPF] ORZ SDVV ÀOWHU UDQJH
160. [MPF] PLGGOH SDVV ÀOWHU UDQJH .+] 1.0KHz, 1.5KHz, 2.5KHz. [HPF] KLJK
SDVV ÀOWHU UDQJH .+] 12.5KHz, 15.0KHz, 17.5KHz.
4 ,I RX DUH QRW VDWLVÀHG ZLWK WKH DGMXVWHG
sound settings, tap to restore default settings.
5 Tap to exit.
Adjust fader/balance/ subwoofer
You can adjust the sound balance between the front, rear, left, and right
speakers and subwoofer.
1 Tap on upper line of the screen to
display setting menu.
2 Tap .
2 Tap or to select a preset EQ:
[Custom] [Techno] [Rock] [Classic] [Jazz] [Optimal] [Flat] [Pop]
3 Tap or to adjust fader/balance value.
[Fader] fader range: +16 to -16. (F = front speaker, R = rear speaker)
[Balance] balance range: -16 to +16. (L = left speaker, R = right speaker)
EN 31
4 Tap . » The subwoofer setting is displayed.
[Subwoofer]: tap [On]/[Off] on screen to turn the subwoofer on or off.
Tap or to select subwoofer volume: 0 to 14.
[LPF]: tap screen to select subwoofer ORZ SDVV ÀOWHU UDQJH
5 Tap to exit.
Switch music listening zone
Philips’ innovative Zone technology enables driver or passengers to enjoy
music with the best speakers balance and experience more vivid spacial effect
as the artist is intended to create.You can switch the music listening zone
from driver to passengers for the best speaker sound settings in car.
1 Tap on the upper line of the screen to
display setting menu .
2 Tap twice. 3 The music zone setting is displayed.
4 Tap on the screen to adjust music listening
zone setting.
Turn FullSound on/off
Philips FullSound restores the audio details that is lost in music
compression. It enriches the music signal, so what you hear is the full sound
with every nuance of emotion and every detail of musical genius. Philips
FullSound can: Bring CD listening experience to MP3 Achieve fuller bass with
greater depth and
impact Restore sense of spaciousness that is
lacking in compressed audio Enhance sound precision and detail
During play, tap on the upper line of the screen. (red): FullSound is
activated. (gray): FullSound is deactivated.
Turn MAX sound on/off
During play, tap on the upper line of screen. (red): turn maximizing sound
(MAX
sound) on. (gray): turn maximizing sound (MAX
sound) off.
Turn DBB on/off
When DBB (Dynamic Bass Boost) is activated, low tones will be enhanced
electronically. Tap on the upper line of screen to toggle between the
settings. (red): DBB (Dynamic Bass Boost)
function is activated. (gray): DBB (Dynamic Bass Boost)
function is deactivated.
32 EN
English
10 Adjust settings
Display system setup menu 1 Tap > to display the full menu.
2 Tap . » The settings menu is displayed.
Adjust general settings 1 Tap .
General settings [Radio Region] [Beep] [Language] [Calibration] [Clock Mode] [Date] [Time]
Options
Description
Select one
that matches
your location.
[On]
Turn the
beep sound
on. Each time
you press a
button, the
unit beeps.
[Off]
Turn off the
beep sound.
Select OSD
(on screen
display)
language.
Calibrate the
touch screen.
[12Hr]/[24Hr] Select time
format.
Set date.
Set time.
4 Tap to exit.
View Info settings 1 Tap .
2 Drag the bar downward to view all
settings.
3 6ZLSH RXU ÀQJHU RQ VFUHHQ UHSHDWHGO WR
select an option. » The setting is changed.
2 Drag the bar downward to view all
detailed information of the system.
EN 33
Adjust Navigation settings 1 Tap .
Adjust Bluetooth settings 1 Tap .
2 6ZLSH RXU ÀQJHU RQ VFUHHQ UHSHDWHGO WR
select an option. » The setting is changed.
Navigation settings [Navigation] [Navigation Program Path] [Navigation Voice]
Options [On] [Off] [On] [Off]
Description
Turn the navigation on. Turn the navigation off. Access the Navigation Program
Path mode. Turn the navigation voice on. Turn the navigation voice off.
3 Tap to exit.
2 Tap on a setting repeatedly to change
setting.
Bluetooth settings [New Pairing] [Auto Connect] [Auto Answer] [Pin Code] [Device Name]
Options [On] [Off] [On] [Off]
Description
Pair new device.
If the pre-paired device is within effective range, the system reconnects to
pre-paired device automatically. Need to reconnect manually. Answer paired
phone call automatically. Answer phone call manually. Set code for pairing the
car entertainment system with other Bluetooth devices.The default code is
0000. View the name of paired device.
3 Tap to exit.
34 EN
English
11 Others
Adjust brightness
1 Press DISP on front panel repeatedly to
adjust the dimmer settings.
2 Press and hold DISP to turn off the display,
press again or tap on TFT screen to switch on.
Tip While playing DVD/Video or picture, you can also
tap on / on screen to adjust screen brightness/ contrast.
Set rear view camera
If you connected a rear view camera, you can see from the screen of the car
audio system what the camera takes when the back lamp lights up.
1 Tap . 2 Tap .
» Picture from rear camera is displayed.
Adjust display design
You can change the background screen on the playback mode.
1 In any mode, tap . » The option menu is displayed.
2 Tap [Display Design] to set the options.
[Wallpaper]: tap to change wallpaper on screen.
[Visualizer]: tap to change visualizer on screen.
[Screen]: tap to change OSD display color.
[Key Color]: tap to change OSD main unit button illumination color.
3 Tap to exit.
Listen to other devices
You can connect an external audio/video device to the car audio system.
1 Connect the car audio to the device with
the supplied AV cable.
EN 35
AV IN
2 Tap to display home menu. 3 Tap [AV-IN1]. 4 Operate the connected the device
(see
instruction manual of the device).
Tip If you connect the system to other audio devices
through the REAR OUT L/R connector (see “Wiring Diagram” section), tap [AV-
IN2] to listen to that device.
Detach the front panel
You can detach the front panel to deter theft.
1 Press OPEN to release the panel. 2 Push the right side of the panel
leftward.
3 Pull the panel towards you to disengage it
from the chassis.
4 Store the panel in the supplied carrying
case to protect it from dirt or damage.
Reset
When the unit hangs up, you can reset it. Press RESET with a ball-point pen or
similar tool.
36 EN
Tip When the unit is reset, all the settings remain
unchanged.
Replace fuse
If there is no power, the fuse may be damaged and need to be replaced.
1 Take out the unit from dashboard. 2 Check the electric connection. 3 Buy a
fuse that matches the voltage of the
damaged fuse (15A).
4 Replace the fuse.
15A
15A
Tip
If the fuse breaks immediately after it has been
replaced, there may be an internal malfunction. In this case, consult your
Philips dealer.
12 Product information
Note Product information is subject to change without prior
notice.
General
Power supply
Fuse Suitable speaker impedance Maximum power output Continuous power output
Pre-Amp output voltage
Subwoofer output voltage
Aux-in level Dimensions (W x H x D) Weight (main unit)
12 V DC (11 V – 16 V), negative ground 15 A 4 – 8
50 W x 4 channels
24 W x 4 channels (4 10% T.H.D.) 2.0 V ( CD play mode; 1 kHz, 0 dB, 10 k load)
2.0 V (CD play mode, 61 Hz, 0 dB, 10 k load)
500 mV 178 x 50 x 210 mm
3.1 kg
Disc player
System
Frequency response Signal/noise ratio Total harmonic distor tion Channel
separation Video signal format Video output
DVD / CD audio / MP3 system 20 Hz – 20k Hz >75dB Less than 1%
55dB NTSC only 1 +/- 0.2V
EN 37
English
Radio
Frequency range – FM
Frequency range AM(MW) Usable sensitivity – FM Usable sensitivity – AM (MW)
87.5 – 108.0 MHz (50kHz per step) 522 – 1620 KHz (9kHz per step) 5 uV 25 uV
LCD
Screen size Display resolution Contrast ratio Brightness
7.0 inches 800 x 480 dots 500 450 cd/m2
Bluetooth
Communication system Output
Maximum communication range Frequency band
Compatible Bluetooth SURÀOHV
Suppor ted codecs
Receive Transmit
Bluetooth Standard version 2.0 Bluetooth Standard Power Class 2 Line of sight
approx. 8m
2.4 GHz band (2.4000 GHz – 2.4835 GHz) +DQGV)UHH 3URÀOH +)3 +DQGVHW 3URÀOH +63
Advanced Audio ‘LVWULEXWLRQ 3URÀOH $’3 Audio Video Remote &RQWURO 3URÀOH $95&3
SBC (Sub Band Codec) SBC (Sub Band Codec)
USB playability information
Compatible USB devices: 86% ÁDVK PHPRU 86% RU 86% 86% ÁDVK SODHUV 86% RU 86%
Memory cards (SD / MMC / SDHC)
Supported USB formats: 86% RU PHPRU ÀOH IRUPDW )$7 )$7 MP3 bit rate (data
rate): 32-320 Kbps and
variable bit rate WMA v9 or earlier Directory nesting up to a maximum of 8
levels Number of albums/folders: maximum 99 Number of tracks/titles: maximum
999 ID3 tag v2.0 or later File name in Unicode UTF8 (maximum
length: 128 bytes)
Supported MP3 disc format: ISO9660, Joliet Maximum title number: 512
(depending on
ÀOH QDPH OHQJWK Maximum album number: 255 Supported sampling frequencies: 32
kHz,
44.1kHz, 48 kHz Supported Bit-rates: 32-320 Kbps and
variable bit rate
Supported video formats: DVD Divx
Note
7R HQVXUH D EHWWHU SODEDFN LW LV UHFRPPHQGHG WKDW ÀOH
image size is no higher than 640 x 480, frame rate is 20 fps, data rate is no
higher than 500 kbps.
38 EN
13 Troubleshooting
Warning
Never remove the casing of this device.
To keep the warranty valid, never try to repair the system yourself. If you
encounter problems when using this device, check the following points before
requesting service. If the problem remains unsolved, go to the Philips web
site (www.philips.com/welcome). When you contact Philips, ensure that the
device is nearby and the model number and serial number are available.
No power Car engine has not been started. Start the
car engine. Connections are incorrect. Fuse has been damaged. Replace fuse.
No sound Volume is too low. Adjust volume. Speaker connections are incorrect.
No response to the remote control Ensure that the path between the remote
control and the unit is clear from obstacles. From a close distance, point the
remote
control directly at the unit. Switch F/R to correct position (F for front
control and R for rear control). The function does not work. See the
instruction manual. Replace the remote control battery.
Disc does not play Disc is upside down. Ensure that the
printed side is upwards. Disc is dirty. Clean the disc with a clean,
soft, lint-free cloth. Wipe the disc outwards from the center. Disc is
defective.Try another disc. incompatible disc is used.Try another disc. Disc
rating exceeds the restriction setting. Change the rating settings to lower
one.
Disc region code is not compatible with the unit. Use disc with proper region
code.
&DQ·W SOD ‘LY; ÀOH IURP 6’ RU 86% This device doesn’t support DivX playback
in SD or USB mode.
No image Parking wire connection is incorrect. Check
the wiring.
No image on rear display Check if you are playing DivX video. If
yes, it’s normal, for this device does not support video out in DivX playing
mode.
,PDJH ÁDVKHV RU GLVWRUWHG Video DVD settings do not match with the
DVD. Adjust video DVD settings. Video connection is improper. Check the
connections.
Noise in broadcasts. Signals are too weak. Select other stations
with stronger signals. Check the connection of the car antenna. Change
broadcast from stereo to mono.
Preset stations lost. Battery cable is not correctly connected.
Connect the battery cable to the terminal that is always live.
Fuse is broken The fuse type is incorrect. Replace it with
a 15A fuse. Speaker wire or power wire is grounded.
Check the connections.
Display show ERR-12 USB/SD/MMC data error. Check the USB
device or SD/MMC card.
About the Bluetooth device
Music playback is unavailable on the system even after successful Bluetooth
connection. The device cannot be used with the
system to play music.
EN 39
English
The audio quality is poor after connection with a Bluetooth-enabled device.
The Bluetooth reception is poor. Move
the device closer to the system or remove any obstacle between the device and
the system. Cannot connect with the system. 7KH GHYLFH GRHV QRW VXSSRUW WKH
SURÀOHV required for the system. The Bluetooth function of the device is not
enabled. Refer to the user manual of WKH GHYLFH WR ÀQG RXW KRZ WR HQDEOH WKH
function. The system is not in the pairing mode. The system is already
connected with another Bluetooth-enabled device. Disconnect that device or all
other connected devices and then try again. The paired mobile phone connects
and disconnects constantly. The Bluetooth reception is poor. Move the mobile
phone closer to the system or remove any obstacle between the mobile phone and
the system. Some mobile phones may connect and disconnect constantly when you
make or end calls.This does not indicate any malfunction of the system. For
some mobile phones, the Bluetooth connection may be deactivated automatically
as a power-saving feature. This does not indicate any malfunction of the
system.
40 EN
© 2011 Koninklijke Philips Electronics N.V. All rights reserved.
CED780_55_UM_V1.0
References
- Play DivX files. Free video software to play, convert and cast video.
- DivX Device Registration - Free DivX Video Software
- Product registration | Philips
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>