Otter Products OBFTC-0122-A Power Bank with Apple Watch Charger User Guide

June 3, 2024
OTTER PRODUCTS

Otter Products OBFTC-0122-A Power Bank with Apple Watch Charger

Otter-Products-OBFTC-0122-A-Power

Power Bank with Apple Watch Charger

User Guide
© 2022 Otter Products, LLC. All rights reserved. The OtterBox name and OtterBox trademarks are the property of Otter Products, LLC, registered in the US and other countries. 209 S Meldrum St, Fort Collins, CO 80521 USA. Hibernian House, 80a South Mall, Cork, Ireland. Apple, MagSafe and iPhone are trademarks of Apple Inc., registered in the US and other countries. The trademark “iPhone” is used in Japan with a license from Airphone KK.

Product Video

For Questions/Help
https://www.otterbox.com/en-us/contact-us

User Manuals, Regulatory Documents, and Declarations of Conformity
https://www.otterbox.com/en-us/accessory-user-guides.html

CONTENTS

  •  Power Bank
  •  USB C Cable

SPECIFICATIONS

  •  Regulatory Model Number: OBFTC-0121-A
  •  Battery Capacity 3000mAh 3.7V – 11.1Wh
  •  Rated Capacity 1690mAh
  •  Input Power: 5V/3A 15W
  •  Output Power: USB-C 5V/3A 15W
  •  Wireless Output Watch 5W
  •  Total Output: 20W Max
  •  Frequency:
    •  326.5 kHz
    •  1.778 MHz
  •  Operating Temperature: Charging: 10 to 40°C |50 to104°F; Discharging: -10 to 40°C | 14 to 104 °F

COMPATIBLE PRODUCTS

For use with Apple Watch
SETUP
Fully charge Power Bank before first use with the included cable. While charging, the display continually shows battery capacity as follows:

  •  1 flashing LED = < 25% capacity
  •  1 solid LED, 1 flashing LED = 25-50% capacity
  •  2 solid LEDs, 1 flashing LED = 50-75% capacity
  •  3 solid LEDs, 1 flashing LED = 75-99% capacity
  •  4 solid LEDs = 100% capacity

When not charging, press the button to view capacity

  •  No LEDs = 0% capacity
  •  1 flashing LED = 0-10% capacity
  •  1 solid LED = 10-25% capacity
  •  2 solid LEDs = 25-50% capacity
  •  3 solid LEDs = 50-75% capacity
  •  4 solid LEDs = 75-100% capacity

WIRELESS CHARGING

  1.  Attach Apple Watch to the magnetic charging connector on Power Bank.
  2.  Press the button at the top to turn on Power Bank
  3. The charge indicator appears in the watch screen, and the first Power Bank LED displays green during charging.
  4. Power Bank auto-stops charging when the watch is full.
  5. To manually stop charging, press and hold the button.
    Note: The wireless output is automatically enabled when connected to a power source.

DUAL-DIRECTION CABLE CHARGING

  • To charge a device with Power Bank via a USB-C cable:
  •  Plug the cable into Power Bank and then into the device.
  •  Charging starts automatically. If it does not, press the button to initiate the charge.
  •  Recharge Power Bank with a USB-C cable and charger.

SAFETY AND PRECAUTIONS

  •  Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, submerge in a liquid, or insert foreign objects into the power bank.
  •  Keep power banks out of the reach of children. Children should be supervised when a power bank is in use.
  •  Do not expose power banks to heat or fire. Do not store in direct sunlight or in a vehicle.
  •  Do not use or charge a damaged power bank. In the event of a power bank leaking, keep away from skin and eyes. Wash any affected area with large amounts of water and seek medical attention.
  •  Power banks need to be charged before use. Always use the correct cable and refer to the power bank manufacturer’s instructions for proper charging instructions.
  •  Do not use any cable other than that specifically provided or recommended by the power bank manufacturer.
  •  Do not use a damaged cable to charge or discharge a power bank.
  •  Do not leave a power bank on prolonged charge when not in use. Disconnect the power bank from the charging source once full.
  •  Observe the dedicated input and output ports for receiving and providing power on the power bank and the device to be charged to ensure correct use.
  •  Do not use any power bank which is not designed for use with the device you wish to charge. Refer to the device’s manual for proper charging instructions.
  •  When possible, detach cable(s) from the power bank when not in use.
  •  Only use the power bank in the application for which it was intended.
  •  Store the power bank in a cool, dry place when not in use. When a power bank is not used for prolonged periods, the power bank should be charged periodically in order to maintain power bank life.
  •  Dispose of the power bank properly.
  •  Keep all instructions provided with the power bank for future reference.

Turkey Safety and Precautions

  •  For indoor use only.
  •  Do not use this product to recharge non-rechargeable batteries.
  •  Please check prior use, if the output voltage and current of the battery charger is suitable for the charging battery pack.
  •  Do not use the charger in circumstances when the output polarity does not match the load polarity.
  •  If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard.
  •  The cover may under no circumstances be opened. If the cover is damaged, then the adaptor may no longer be used.
  •  Disconnect the supply before making or breaking the connections to the battery.
  •  This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  •  Children shall not play with the appliance.
  •  Cleaning and user maintenance shall not be made by children without supervision.
  •  Li-ion battery should be charged under an ambient temperature specified by the battery user instruction, an environment with a low (e.g. below 0˚C) or high (e.g. above 45˚C) temperature could cause a serious battery safety problem.

Compliance Statements

FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  •  Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and the receiver.
  •  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help.

FCC RF EXPOSURE COMPLIANCE
The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

IC Caution
Radio Standards Specification RSS-Gen, issue 5

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1.  This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC RF EXPOSURE COMPLIANCE
RF exposure statement: The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

EU Caution
This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. This restriction will be applied to all Member States of the European Union. The device can be used in portable exposure conditions without restriction.

Declaration of Conformity
Hereby, Otter Products, LLC. declares that the product type OBFTC-0121-A is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.otterbox.com/en-us/accessory-user-guides.html

UK Caution
The device is in compliance with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations SI 2017:1206 (as amended). The device can be used in portable exposure conditions without restriction.

Declaration of Conformity
Hereby, Otter Products, LLC. declares that the product type OBFTC-0121-A is in compliance with the following Directives: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016, and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electrical Equipment 2012. The Full test of the UK declaration of conformity is available at the following internet address: https://www.otterbox.com/en-us/accessory-user- guides.htmlOtter-Products-OBFTC-0122-A-Power

MEXICO COMPLIANCE STATEMENTS
Power Bank with Apple Watch Charger – OBFTC-0121-A The operation of this equipment is subject to the following two conditions: (1) this equipment or device may not cause harmful interference and (2) this equipment or device must accept any interference, including that which may cause its unwanted operation.

SINGAPORE COMPLIANCE STATEMENTS
[Insert Statements if Required][Insert Complies with IMDA Standards and list CM Company DB Number]

TAIWAN COMPLIANCE STATEMENTS

[Battery Compliance Statements Start]

Notes

  •  Before use, please pay attention to the logo on the mobile power supply to ensure correct use.
  •  For the first time, it is recommended to fully charge the mobile power supply first.
  •  To charge the mobile power supply, it is recommended to use the BSMI safety-certified power supply.
  •  Use the power bank to charge other devices, please choose the matching cable.
  •  During the charging process of other devices, if the power bank shows that the power is insufficient, please charge as soon as possible.
  •  Please keep the power bank clean and dry, do not wipe this product with chemicals, soap, and damp cloths.
  •  Please store the power bank in a dry, away from wet and corrosive items.
  •  After long-term storage, it is necessary to charge and discharge the mobile power supply several times to obtain the best use effect.
  •  Take good care of your child to make sure they don’t play with the power bank as a toy.
  •  If you find that the mobile power supply or charging equipment has swelling and other undesirable phenomena, it should be stopped immediately.
  •  Once the leak occurs, do not directly contact the leaked liquid with the skin or eyes; If contact occurs, rinse the contact area with plenty of water and seek medical attention promptly.
  •  Please dispose of waste mobile power in accordance with national environmental protection regulations.

Warning
It is forbidden to disassemble, impact, or squeeze the power supply, and do not place it in direct sunlight or throw the power supply into the fire

  •  The company, the firm or the user shall not change the frequency, increase the power, or change the characteristics and functions of the original design without the approval of the low-power RF equipment that has been certified by the examination and verification.
  •  The use of low-power RF equipment shall not affect the safety of flight and interfere with legitimate communications; When interference is found, it should be immediately discontinued and improved until there is no interference before continued use.
  •  The above-mentioned legal communications refer to radio communications that operate in accordance with the provisions of the Telecommunications Administration Law.
  •  Low-power RF equipment must tolerate interference from legal communications or industrial, scientific, and medical radio-radiating electrical equipment.

UNITED ARAB EMIRATES (UAE) COMPLIANCE STATEMENTS
[Insert Correct TDRA Details for Galatea Current Image Below is for TRITON only as an example]

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals