EDIFIER W820NB Active Noise Cancelling Bluetooth Stereo Headphones User Guide
- June 6, 2024
- Edifier
Table of Contents
EDIFIER W820NB Active Noise Cancelling Bluetooth Stereo Headphones
Functional Operation
Bluetooth Connection
- For initial use, press and hold the power button for around 3 seconds to power on the headset with the blue and green lights flashing alternately and rapidly, auto-entering Bluetooth pairing;
- Set mobile phone to search for and connect to “EDIFIER W820NB”, after pairing is successful, the blue light will flash twice. For subsequent use, the headset will connect to the device used last time.
- Connect to new Bluetooth devices: When the headset is powered on, press and hold the multi-function button for around 3 seconds for device connection, and the blue and green lights will flash alternately and rapidly.
Restore to Factory Settings
- When the headset is powered on, press and hold the “+” and “-” buttons simultaneously for around 5 seconds until the blue light flashes six times rapidly to clear pairing records.
Note:
- Images are for illustrative purposes only and may differ from the actual product.
- To enjoy Hi-Res Audio, please connect this headset to audio output devices with a Type-C data cable.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by EDIFIER is under license. Other trademarks and trade names are those of their respective owners.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
IC statement:CAN ICES-3(B)/NMB-3(B).
FCC ID: Z9G-EDF139
IC: 10004A-EDF139
Declaration for EU
Frequency Band: 2.402GHz ~ 2.480GHz
RF Power Output: ≤20 dBm (EIRP)
There is no restriction of use.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>